Windows 7 to add native support for Virtual Hard Disks


Recommended Posts

  Tom Servo said:
And booting from VHDs? What's the point? Windows ****s all over itself if main components like mainboard chipset or CPU change (the emulated environment in a VM is a different one than your real one). Not to mention the funky performance loss on disk IO due to NTFS -> VHD -> NTFS, especially with Windows' ****ty IO scheduler.

Riiiiight... the IO scheduler that Linux has taken over a decade to come close to catching up with. Uh huh.

I swapped out a motherboard + CPU a few weeks ago on this very system. Vista had absolutely no problems detecting the new hardware and booting up just fine. On my Macbook I can boot between VMware and the native partition via BootCamp, and have no troubles at all.

  Brandon Live said:
Riiiiight... the IO scheduler that Linux has taken over a decade to come close to catching up with. Uh huh.

Yeah, right, the Windows SCAN scheduler is the pinnacle of IO scheduling. Go away.

  Brandon Live said:
I swapped out a motherboard + CPU a few weeks ago on this very system. Vista had absolutely no problems detecting the new hardware and booting up just fine. On my Macbook I can boot between VMware and the native partition via BootCamp, and have no troubles at all.

I switched mainboard and CPU too a few weeks ago, coincidentally. Vista however decided to do a boot loop. That did really help, so much for that. And I didn't even change CPU architecture, e.g. from Intel to AMD or the other way.

  Long said:
Maybe not so impossible.

I've already posted that this driver is available since quite some time now. That screenshot means exactly squat.

  Quote
New Features in Virtual Server R2 SP1

VHD Mount Command-line Tool and APIs

Provides the ability to mount a virtual hard disk file (.vhd file) as a virtual disk device on another operating system.

http://www.microsoft.com/technet/virtualse...vsoverview.mspx

  Tom Servo said:
Yeah, right, the Windows SCAN scheduler is the pinnacle of IO scheduling. Go away.

Yeah, because you obviously know so much about how NT works.

Seriously, don't most Linux systems still lack I/O prioritization? Cancellable I/O? Last I recall they still don't support propogating I/O completion tasks to user-mode threads, either.

I was mainly talking about how far behind Linux used to be, before the 2.6 kernel, or before AIO started to become adopted. Things seem to be more evenly matched, these days.

  Brandon Live said:
Yeah, because you obviously know so much about how NT works.

Then tell me how the scheduler works! You're always telling me I'm full of myself, yet never spill the beans to actually correct me. Until then, I rely and believe what I find elsewhere, and they tell me it's a crappy SCAN algorithm.

  Brandon Live said:
Seriously, don't most Linux systems still lack I/O prioritization? Cancellable I/O? Last I recall they still don't support propogating I/O completion tasks to user-mode threads, either.

I was mainly talking about how far behind Linux used to be, before the 2.6 kernel, or before AIO started to become adopted. Things seem to be more evenly matched, these days.

How would I know? Does it look like I'm a Linux user?

But seriously, Linux comes with prioritization and cancellable IO. Who the hell knows about completition tasks, ask an actual Linux user. But hey, good job picking arguments that are completely silly, because it took the release of Vista for Windows to get the stuff you're holding against me as an argument. Linux had at least the two things I mentioned around Vista's release timeframe already.

  doncoyote.cl said:
... and Microsoft promises this... and then promises that... and then the promises are not accomplished

The same story over and over again.

Let's see the final product, then we talk.

-Rodrigo

You do know this is an advert for employees not a "LOOK HOW SHINY THIS IS!" thing, right?

  zer0l0gic said:
Sounds great. But, we should all take a deep breath, remember all the promises of Vista?

So, if Microsoft delivers. Top marks.

  doncoyote.cl said:
... and Microsoft promises this... and then promises that... and then the promises are not accomplished

The same story over and over again.

Let's see the final product, then we talk.

-Rodrigo

Microsoft isn't promising anything. Read the article.

  Quote
I have a nice hat that you might be interested in... it's made from tin foil!

lol

VHD native support would be a more than welcome addition.

Also the virtual drive or disc for mountin disc images would be great. Or at least native support for creating virual folder that run on ram.

Um, isn't that a feature that was supposed to be in Vista already? I remember I read somewhere that Vista will have the ability to mount vhds that are used by Virtual PC.

Later when I got my hands on Vista, I was quite frustrated when I found out it didn't work.

This is just one of the features that should have been in Vista, and now is coming in the next version.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wrong again. Electric vehicles are more reliable than gasoline vehicles because they have fewer points of failure. On average, they last 50% longer. Its your right to be incorrect and my right to correct you.
    • Hello, I am using a Hitron CODA56 cable modem with Comcast Xfinity's 1200 Mbps service.  No issues noted.  I had looked at the Motorola and Netgear options for a cable modem, but neither was available for purchase at the time I upgraded my cable connection. There are multiple models in the Netgear Nighthawk X10 line-up.  I am guessing you have either the the Netgear Nighthawk X10 AD7000 model (R8900) or the Netgear Nighthawk X10 AD7200 model (R9000) model, is that correct?  Both of these only have one gigabit WAN (internet) ports for connection to the modem, all of the remaining ports for the LAN side of things are gigabit Ethernet ports.  The 10GbE port on the devices is meant for connection to local NAS storage.  I suppose you could connect the desktop computer directly to it, although it would still be limited by the gigabit connection between the cable modem and the Netgear residential gateway broadband router. I would suggest looking for a residential gateway broadband router from a company like Asus, Netgear, TP-Link or maybe even Ubiquiti, depending upon budget, that has 2.5Gbps (or faster) WAN and LAN ports.  That would allow you to make full use of the 1.2Gbps connection from your ISP as well as have some room for future growth, speed-wise. Regards, Aryeh Goretsky      
    • Firefox 140.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox 140.0.1 fixes: Fixed text contrast issues in the sidebar with some dark themes. (Bug 1971487) Fixed a startup crash experienced by some users caused by DLL injection. (Bug 1973947) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~60.0 MB (Freeware) Download: Firefox 140.0.1 for Linux | 64-bit | ~90.0 MB Download: Firefox for MacOS | 127.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, RAID-1 is also known as disk mirroring.  That means that all writes are going to be performed identically to all of the drives in the array.  It may also apply to reads as well, but those tend to show less of a performance improvement. If a file gets accidentally overwritten, deleted, or otherwise accidentally modified in a RAID-1 array, that change gets written to all of the drives in the array.   If your goal is to have some level or redundancy or protection fir  your information, having two separate drives that are not RAIDed together in a mirror configuration may be the better solution, as an accidental disk or file operation on one drive does not automatically occur on the second drive.   Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Marites earned a badge
      Week One Done
    • One Year In
      runge100 earned a badge
      One Year In
    • One Month Later
      runge100 earned a badge
      One Month Later
    • One Month Later
      jfam earned a badge
      One Month Later
    • First Post
      TheRingmaster earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      575
    2. 2
      ATLien_0
      185
    3. 3
      +FloatingFatMan
      178
    4. 4
      Michael Scrip
      136
    5. 5
      Xenon
      120
  • Tell a friend

    Love Neowin? Tell a friend!