Recommended Posts

i just ordered it, 39 bucks total with tax canadian, how could i not? Reading all over the web peoples experience with it so far and it seems pretty positive.

A lot of people seem to be having issues booting with the 64 bit kernel, mainly because their EFI doesn't support it.

To see if you mac will go into terminal and type in

ioreg -l -p IODeviceTree | grep firmware-abi

If it says EFI64 bit you are good to go, if it says EFI32 then it's not going to work for you.

"firmware-abi" = <"EFI64">.

Sweet :p

Did they ever say Windows 7 was supported?

i understand that technically Vista drivers work 90% of the time for 7 wich is what we have all been using for 7 but originally only XP was supported under bootcamp,

vista came later, and most machines except for MBP's,Mac Pro's and Xserves didn't have official 64bit bootcamp driver support wether they are 64bit processors not,

so i can't immagine that apple would support 7 before its official release

Everything worked perfectly on the BootCamp included with 10.5. Although I don't remember if I was running 32 or 64 bit at that point, so that is most likely the problem. There are 64 bit drivers included on the BootCamp 3.0 disc though. I just had to manually run them since the autorun would shoot an error.

Does anyone know if the retail disc that Apple will sell of SL require Leopard Install disc? Because it is suppose to be an upgrade retail disc.

To do an upgrade you will need to have Leopard installed (i.e. you are in Leopard and you insert the disk and it does it thing) And honestly - do an upgrade is always asking for trouble with the OS anyways

You can however have tiger installed (or leopard installed) insert the disk and reboot and hold down C to boot from the CD. Once there just go into Disk Utility and erase the disk, and install that way.

Its annoying reading the 1000s of post over at MacRumors with people saying you have to have Leopard install for the disk to boot. Such rumors.

Everything worked perfectly on the BootCamp included with 10.5. Although I don't remember if I was running 32 or 64 bit at that point, so that is most likely the problem. There are 64 bit drivers included on the BootCamp 3.0 disc though. I just had to manually run them since the autorun would shoot an error.

I have ran Windows 7 64 bit under BootCamp from the first build made available to developers after WWDC and never had a problem with it. The 3.0 drivers work very well.

your lucky, my macbook 2,1 doesn't support it

Shouldn't all Intel-based Apple computers support a 64-bit kernel? I believe the earliest Intel models ran at least an Intel Core Duo, which I think was 64-bit capable.

Shouldn't all Intel-based Apple computers support a 64-bit kernel? I believe the earliest Intel models ran at least an Intel Core Duo, which I think was 64-bit capable.

The original Intel computers that Apple shipped were 32-bit only. The Core Duo series were all 32-bit however the Core 2 Duo was 64-bit

Which means there are MacBook Pros and iMacs floating around with only 32-bit Intel hardware.

Ordered the family pack, but slightly disappointed it isn't booting 64bit by default. I understand the issue with KEXT, but still, it seems Windows 7 64 is doing a better job of it.
for all intents and purposes it doesn't seem as if there's much speed gain to be had by booting x64. the 32-bit kernel can still run 64-bit applications, and there isn't the hard limit with 2-3GB of RAM that windows x86/32 has.

that said, the x64 version of Safari is a beast - ran through the sunspider JS benchy in ~350ms

Yes, but the plugins are running in a 32bit sandbox (unless there's a 64bit version of Silverlight available)

That's pretty advanced, they was able to make Safari 64-bit but keeping 32-bit compatibility for plugins. Not even Internet Explorer 8 64-bit have compatibility with 32-bit version of Flash.

Yea, Safari 64-bit is pretty advanced. The only 32-bit things it can't handle are InputManagers, but most of them will probably release 64-bit versions (I know 1Password already has with its beta of 3.0).

Yea, Safari 64-bit is pretty advanced. The only 32-bit things it can't handle are InputManagers, but most of them will probably release 64-bit versions (I know 1Password already has with its beta of 3.0).

From what I noticed hardly any plugins / input managers / contextual menus work in Snow Leopard. No matter what I do I can't get the Toast It plugin of Toast Titanium v10 to work. :/

You can't mix and match 32-bit plugins with 64-bit software. Run things in 32-bit mode with the Get Info panel if needed.

I think you'd have to make Finder run in 32-bit for contextual menus to work. Which, I assume, is possible. Finder is located in /System/Library/CoreServices/ if you want to try, .Neo.

I think you'd have to make Finder run in 32-bit for contextual menus to work. Which, I assume, is possible. Finder is located in /System/Library/CoreServices/ if you want to try, .Neo.

all new 64bit system apps in SL including finder can be run in 32bit mode by checking this tickbox in the "get Info" dialog box

post-24918-1251212839_thumb.png

all new 64bit system apps in SL including finder can be run in 32bit mode by checking this tickbox in the "get Info" dialog box

Yea, that's what I was thinking. And I did check: Finder does have the option just like all the other 64-bit apps in Snow Leopard. We'll just have to see if it helps .Neo any.

You can't mix and match 32-bit plugins with 64-bit applications. Run things in 32-bit mode with the Get Info panel if needed.

While I don't know how it is in SL, there's no real technical reason why you can't. All it takes is a proxy that sits between the 32-bit plugin and 64-bit program. You can do this with Firefox on Linux, for instance.

While I don't know how it is in SL, there's no real technical reason why you can't. All it takes is a proxy that sits between the 32-bit plugin and 64-bit program. You can do this with Firefox on Linux, for instance.

That's how it works in Safari in 10.6. 32-bit plug-ins, like Flash Player, are run as a separate process from 64-bit Safari. Finder doesn't run its contextual menus item in a separate process though. (would be nice) Same for input managers like SIMBL.

Yea, Safari 64-bit is pretty advanced. The only 32-bit things it can't handle are InputManagers, but most of them will probably release 64-bit versions (I know 1Password already has with its beta of 3.0).

Ah, this must explain why even the latest version of Saft isn't working. I guess Saft has no 64-bit version yet.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You can't remove Safari though. Or almost any other bundled app for that matter, and pretty much all of them are useless to me (and there are is a heap of them compared to Windows). I'll much rather take Edge than Safari, at least it can be highly customized vs. Safari. I'll take a PC with ten Edges over a Mac any day though as I can't stand all the limitation and painfully frustrationg restriction that make me dislike their stuff with a burning passion, iOS included (especially iOS).
    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!