Mighty Mouse - not so mighty after all?


Recommended Posts

The Mighty Mouse is the worst mouse I've ever seen (And I think everyone else would agree with me).

Change it while you still can!

+1

The ball gets dirty very easily. You could try cleaning it, but it sounds like a pain... return it or replace it, if you can.

My Mighty Mouse's wheel wouldn't roll up. is that common? It's very annoying, and I have it for maybe 3 weeks. :p

What should I do?

This is a (sadly) common problem with the Mighty Mouse.

Below you can find Apple's instructions on how to clean your Mighty Mouse.

http://docs.info.apple.com/article.html?artnum=302417

How to clean your Mighty Mouse

Last Modified on: May 30, 2007

Article: 302417

Although your Mighty Mouse never needs to be fed or watered, you may occasionally find that you need to clean it.

If your Mighty Mouse is covered in fingerprints or its surface has become soiled, it can be gently wiped with a clean lint-free cloth. If necessary, moisten the cloth using only water, making sure not to oversaturate it. Be aware that the mouse contains electronic components that may be damaged if water drips from the cloth into the mouse via the seam around the scroll ball or around its underside.

The same procedure can be used to clean the scroll ball on your Mighty Mouse if it has become discolored or dirty. Use a clean lint-free cloth lightly moistened with water. Wipe the ball and the surrounding area, making sure to rotate the ball itself to ensure complete coverage. If the scrolling feels rough or if the scroll ball isn't scrolling up, down, or side-to-side, hold the mouse upside-down and roll the ball vigorously while cleaning it to help dislodge any particles that may have collected on the internal hardware.

For a QuickTime movie demonstration, click here (the movie is approximately 600 KB).

The Mighty (not!) Mouse is an abomination - the 360 scroll ball is a nice idea, but crummy implementation, and the mouse is unconformable to boot. Apple should just leave mice design to Microsoft and Logitech, as they have no idea how to build a comfortable, reliable mouse.

The problem is they're trying to apply their ever-popular minimalist design to something which isn't meant to be designed that way.

Mice need grooves and grips. Having a small smooth pebble-shaped object with a miniscule ball-thing on the front isn't what I'd call user-friendly.

I really liked my Mighty Mouse for the first few months, but what turned me off was the spotty right-click detection. I found myself having to lift all my other fingers off the mouse completely when using the right-click "zone" on the MM or it would register as a regular left-click.

Not a terrible mouse but I like my Kensington trackball ("Expert Mouse" by name, but it's a trackball) much better. Bonus: it looks like it belongs in an episode of Stargate.

I guess I'm gonna have to buy a new mouse. mannnn! It's so beautiful. :(

Any compact bluetooth logitech mouses out there?

edit: u Apple fanboys turn your coat real quickly, eh? :) lol

Well, rubbish is rubbish :)

I'm using a Logitech v470 right now. It works nicely, but it's definitely more basic - just two buttons and a clickable mouse wheel.

I'm still loyal to my Mighty Mouse simply because it looks awesome. Yes, yes, I know, but I don't find it all too bad. I use the trackpad for scrolling anyway.

So everytime you want to scroll a webpage you take your and off the mouse, and use the trackpad? man.... that's a real burden.

  • 3 weeks later...

I know this isn't recommended, but what I did when the scroll ball wasn't scrolling was to wipe the ball, turning it fiercely so it got wiped all the way round, with a cologne-impregnated tissue, the sort that come in foil sachets to keep them moist. It's worked a treat, at least so far (for a few weeks). I found the MM took a bit of getting used to after a Logitech one, but it looked so cool that I persevered. And now I really like that cute little scroll ball and find the mouse as a whole comfortable and easy to operate.

since i wash my handy like every 10 minutes and my room is almost sterile, i love my mighty mouse. ;)

it looks great and for me it works great. i clean my computer parts every 4 or 5 weeks anyway, so my macbook, my speakers and of course the mouse aswell, so its not that a big deal for me that it gets dirty very fast.

plus, i could not live without the squeeze-buttons (expos? for me). i know, logitec mouses have additional buttons aswell but... i love squeezing my MM.

the mighty mouse might be one of the worst thing i bought....glad I don't have it anymore

Agreed...very awkward and inconsistent to use. I put mine back in the box after 2 weeks. The Razer Pro has yet to dissapoint.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!