Recommended Posts

I am looking at this one

http://www.usa.canon.com/consumer/controll...p;modelid=11924

I have always wanted an IS lens. Also I want a lens that produces razor sharp pictures. I do not like soft pictures at all.

Image stabilization si a expensive way to get sharp images

try using a lower ISO

a smaller F/stop so a 11

this will make sharper images also you might want to look at a 50mm lens.

Image stabilization si a expensive way to get sharp images

try using a lower ISO

a smaller F/stop so a 11

this will make sharper images also you might want to look at a 50mm lens.

I have a 50mm which is good, but autofocus could be faster. Also I get tired of having to step 50ft back in order to capture a building or landscape. Plus, I am getting blurry shots with it that I would like to eliminate.

Why don't you post some example images of your blurry shots that you're getting? Be sure to include the exif data.

The 24-105L is pretty sharp, but not very "wide" on crop camera like yours. If I wanted to capture landscape or buildings, I'd want 17mm at least. (The 50mm is a portrait lens.) Look into:

Tamron 17-50

Sigma 10-20

Canon 10-22

get the 17-55 f2.8 Is for ur xsi. as fine of a lens and useful at the same time on a xsi. to ironsight, shooting at f11 yes does give u a nice sharp image cuz most len's best performance is around f8-f11 but u are sacrificing dof as well as shutter speed by doing so. shooting low iso at f11 on a cloudy day will give u motion blur as supposed to gettin soft pics at shooting max aperture on a sunny day.

go to a camera store and get the sensor cleand also try doing a firmwar update

you should not get blur shots from any lens

u'll get blur from lens that are too slow in 2 ways.. 1 slow af, u'll fail to track the object u wanna track, 2 small aperture, u'll have low shutter speeds in less than ideal lighting.

get the 17-55 f2.8 Is for ur xsi. as fine of a lens and useful at the same time on a xsi. to ironsight, shooting at f11 yes does give u a nice sharp image cuz most len's best performance is around f8-f11 but u are sacrificing dof as well as shutter speed by doing so. shooting low iso at f11 on a cloudy day will give u motion blur as supposed to gettin soft pics at shooting max aperture on a sunny day.

u'll get blur from lens that are too slow in 2 ways.. 1 slow af, u'll fail to track the object u wanna track, 2 small aperture, u'll have low shutter speeds in less than ideal lighting.

Thanks mate :D I think I will get this one (17-55 f2.8 IS)

Good choice guys?

Think its image quality will be better than my 55 f1.8?

Thanks mate :D I think I will get this one (17-55 f2.8 IS)

Good choice guys?

Think its image quality will be better than my 55 f1.8?

Your 50mm stopped down to 2.8 will be sharper than the 17-55 at 2.8. The 50 is a prime--sharpness (and speed) is the reason you buy primes.

yup, the 50 1.8 @ 2.8 will be marginally sharper than 17-55 f2.8 IS but u don't have the mobility of a 17-55 f2.8 IS. on a crop body, 50mm is still too long for indoor low light. i would pick a 35 f2 or a sigma 30 1.4 instead. if u don't have a top standard zoom, i would recommand u get one.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!