Recommended Posts

I've been having this issue ever since I've owned this notebook. After a few hours of use when I go to download

anything my mouse would get really jittery and usually the computer will lock up seconds after. I would have to wait

for the freezing to subside for just a sec and cancel the download and then my computer would work perfectly fine.

afterwords, I could continue to game,multi-task and would run perfectly unless I tried to download something with the browser.

My computer would even freeze before downloading.. o_o as soon as I click on a link and the " save now" dialog box appears it will freeze.

currently using firefox 3.0, It still did the exact same freezing with firefox 2. I tested on ie in order to troubleshoot and it freezes with that browser as well.

12392038ye1.jpg

Computer Specs:

-GATEWAY P-6831 FX notebook.

-Windows Vista? Home Premium sp1 (32-bit)

-Intel? Core? 2 Duo Processor T5450 (1.66GHz, 667MHz FSB, 2MB L2 Cache)1

-3072MB 667MHz DDR2 SDRAM (1-1024MB & 1-2048 MB module)

-250GB 5400rpm Serial ATA hard drive w/ 8MB cache2

-17.0" WXGA+ Ultrabright TFT Active Matrix (1440 x 900 max. resolution)

-Intel? PM965 Chipset and NVIDIA? GeForce? 8800GTS with 512MB of GDDR3 discrete video memory

Isp: verizon fios

288178087.png

I upgraded to vista sp1 in hopes it would fix this issue but unfortunately it hasn't.

notes: rebooting clears the problem for a couple of hours usually.

any help is greatly appreciated as I'm very close to destroying this laptop with a bat. >_> lol

Link to comment
https://www.neowin.net/forum/topic/645900-vista-freezing-during-downloading/
Share on other sites

Does this happen when you are plugged in? I know that a few laptops have power saver modes when running off battery. Just a thought, an issue that I came across on a Windows 2000 where indexing services was the slow down to save a file when downloading , Not sure if Vista would have that issue or not. Another possible suggestion, goto your download folder and turn the view to Details and not thumbnails, sometimes this slows down the save process on some machines. As well as having a lot of files in that folder.

In Win2k the solution for the indexing issue was as follows.

Goto the run

type

services.msc

then find indexing services and stop the service.

Download file.

then follow the steps and restart the service.

This really had an effect when downloading large files though.

Edited by redvamp128

yup, I rarely travel with this laptop so It's always plugged in.

-I have windows search (indexing service) disabled on this laptop.

-I always download files straight to my desktop for easy access.

any other questions please feel free to ask, I need to figure out this problem before I

lose my mind. lol

Try this for downloading- set FF3 to download not to your desktop- Sometimes that slows things down- Especially if you have lots of Icons. -Make a folder in your My Documents- Save them to there.

I know that in the past if you Had active desktop set for a Favorite Website- It would slow it down. Do you have dreamscapes installed?

I know you may like to save them there- but I know the desktop on a lot of computers is actually a web page- yes strange but true.... Especially if you have a picture as your desktop.

Let us try to take the desktop out of the equation... Make a folder on your C:\ (or whatever drive your Vista is on) then Make that one your default FF3 download location.

I know the desktop behaves differently than a standard folder.

And sometimes computers with lots of Icons/files on the desktop can have an impact on Boot Time - and also accessing things on the desktop.

I know Vista is supposed to handle files better. When was the last time you defragmented your hard drive?

Edited by redvamp128
Let us try to take the desktop out of the equation... Make a folder on your C:\ (or whatever drive your Vista is on) then Make that one your default FF3 download location.

I know the desktop behaves differently than a standard folder.

And sometimes computers with lots of Icons/files on the desktop can have an impact on Boot Time - and also accessing things on the desktop.

I know Vista is supposed to handle files better. When was the last time you defragmented your hard drive?

I don't think it has anything to do with the download file location.

I forgot to mention that even when taking an internet speed test my computer will freeze up and mouse will be

real jittery until the test is over.

><

I think I might know--This may sound crazy--- Your Antivirus software might be the slow down.

Try Disabling it- I know NAV will ask you for a time. Just temporarily disable it- Download your file then restart the antivirus software.. Then after it is done downloading- Have it scan the file you download- I have heard that sometimes it scans them as it comes in (the .part file in FF3) and the (temp) file in IE.

It is the best thing I can come up with.

Maybe it is scanning it while the file is trying to save it.

haha I was just going to edit my last reply and tell you about that.

I've already disabled my firewall( zone alarm free ) and a/v( avg free ) in order to troubleshoot

and I still get the freezing.

eh, hopefully we'll find the problem since we're eliminating things one by one. =b

thanks for all the help so far man.

You using the touch pad for your mouse? If you have a different mouse- like from a pc- or a marble mouse. Try attaching it. I know sometimes the touchpads can be sensitive. Like the Double tip open.

That maybe the jittery. Or goto the control panel and check out the mouse options. Maybe there is something there.

I am going to ask this- but I think I already know the answer- Have you went to the Gateway Site and checked for updated drivers?

Not to mention updates on Windows update?

I use a microsoft usb mouse instead of the touchpad.

I just disconnected the usb mouse and it still makes the cursor jittery for the touchpad too. ><

*restarted firefox each time btw

Here's a link to all of the update drivers currently listed for my notebook.

http://support.gateway.com/support/drivers...;param=1015088R

^I installed the new video driver yesterday. Is there anything you think I should

update on that list?

Does it also freeze when downloading from P2P or BitTorrent apps? Also, by any chance when you copy a file does it freeze? Sounds like a hard drive problem, but if it only freezes while downloading and writing to the hard drive by internet it might be your wireless/ethernet drivers causing this. Did you update them by any chance?

Check the date on your SATA drivers that you have installed. That may cause an issue- though SP1 may have upded ones not sure...

here's a ss of it.

devicepropxg9.png

btw I had this freezing issue before the sp1 update. I was hoping sp1 might of fixed it. =/ lol

Does it also freeze when downloading from P2P or BitTorrent apps? Also, by any chance when you copy a file does it freeze? Sounds like a hard drive problem, but if it only freezes while downloading and writing to the hard drive by internet it might be your wireless/ethernet drivers causing this. Did you update them by any chance?

nup, I can download from torrents without any trouble at all. I'm downloading a video with utorrent right now actually. lol

-just copied a huge file from my video folder to my desktop without and freezing/jittering

I haven't updated any wireless/ethernet drivers afaik. Should I update this driver that is listed for my model number?

http://support.gateway.com/support/drivers...mp;uid=20056002

note: I'm currently using a wireless internet connection.

netro5.png

should I hook up an ethernet cable and see if this problem persists?

Try with the ethernet cable.

I hooked up the cable and It was still jittering on download so I rebooted. After restart my computer will download files

perfectly fine without freezing for an hour or so.

I will have to wait and see if the ethernet cable fixes the issue. =x

If you guys have any other ideas or questions please feel free to chime in. :)

So it didn't freeze at all with the ethernet cable?

I guess we can bring it down to the wireless being the problem.

After I reboot the problem will go away for awhile.. so I had to wait in order to test properly with the Ethernet cable.

edit: I just tested it and it still freezes with the Ethernet cable as well. =[

any other ideas?

Edited by Jigoku

No clue. I'd try formatting, or try an Ubuntu live CD to see if it's a hardware problem or a software problem. If the problem doesn't persist when using Ubuntu or any other O/S, then we can say it's a driver, software problem. If the problem doesn't go away, even after a format/trying it out on another O/S then it's more likely to be a hardware problem.

Can you post a picture of your desktop?... I also want to know do have any RSS loaded in your side bar.

It is possible like for example I have heard of a run away tile . That wreaks havoc on the memory... Which will cause the jittering... as well as the slow downloads. I have also heard of a widget that Shows Stock and weather that can cause similar issues.

No clue. I'd try formatting, or try an Ubuntu live CD to see if it's a hardware problem or a software problem. If the problem doesn't persist when using Ubuntu or any other O/S, then we can say it's a driver, software problem. If the problem doesn't go away, even after a format/trying it out on another O/S then it's more likely to be a hardware problem.

nuuuuu! >< haha

I'm gonna keep trying different solutions before going the 'reformat' route. :cry:

Can you post a picture of your desktop?... I also want to know do have any RSS loaded in your side bar.

It is possible like for example I have heard of a run away tile . That wreaks havoc on the memory... Which will cause the jittering... as well as the slow downloads. I have also heard of a widget that Shows Stock and weather that can cause similar issues.

sure, that's not a problem. x)

I don't have anything loaded on my side bar. I've had the side bar disabled ever since I got this laptop. xD I also have all of the visual

settings turned off except for 4 of them. ss below*

visual settings screenshot:

settingsts8.png

desktop screenshot:

ssna4.jpg

note: I just ran a check disk and It didn't report any errors/bad sectors. ( It took like an hour+ to complete though )

I know there is a setting in the bios on a Dell Laptop.

But Use the F2 key during boot up.

On a Dell their is a setting for Hard Drive Performance... Usually it is set for Quiet or Acoustic. There may be a setting to change that to Normal or Performance.

This does make the Hard Drive a little more noisy.

But I have noticed some faster file access times.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!