Recommended Posts

This may sound weird but try the following.

Create a new user in Vista--

Sign into that user ... switch all eye candy off- Classic Look for Menu and OS- To where it looks like XP.

See if that helps... Just a thought. Worse case is that if it does not work... Just Remove the user and delete the files that it creates.

The new user was to possibly fix the download issue. I will have to do some more research for the download lockup issue... only other thing for the jittering issue is one of two things.. Check the monitor refresh rate-and hook it up to a regular PC monitor to see if the jittering is a bad LCD. I have heard of that. There should be a function to switch it from Laptop display to monitor.

The new user was to possibly fix the download issue. I will have to do some more research for the download lockup issue... only other thing for the jittering issue is one of two things.. Check the monitor refresh rate-and hook it up to a regular PC monitor to see if the jittering is a bad LCD. I have heard of that. There should be a function to switch it from Laptop display to monitor.

I've tried to change the refresh rate before because

when I see an bg/image with grey lines close together it flashes..

greylinesyi1.png

^blinks on my lcd.

It only has 60htz. o.o

refreshqv4.png

note: my computer also freezes/jitters when loading sites with a lot of images. =/

ty for all the help so far. :)

Can you download/run the Benchmarks in HDTune (http://www.hdtune.com/) and post up your results? I had similar problems that you're describing (locking up on downloads) on my sisters laptop and after running that benchmark noticed the HDD was only writing at 2MB/s, swapped the drive out and now it's fine.

Did you try connecting the laptop to a regular PC monitor?... I am thinking bad LCD for the jittering.

I will test that out later today for you.

Can you download/run the Benchmarks in HDTune (http://www.hdtune.com/) and post up your results? I had similar problems that you're describing (locking up on downloads) on my sisters laptop and after running that benchmark noticed the HDD was only writing at 2MB/s, swapped the drive out and now it's fine.

when I try to run the benchmark I get this alert.

hdscannn6.png

my hd was setup like this from the factory.

hdkp9.png

-have you tried your internet connection on a different computer?

-could you try the download with a download manager (like orbit,internet download manager etc.) and see if the problem persists?

-instead of saving have you tried to open the file directly ? does that also cause a stutter?

Ah, didn't know it wouldn't work on multiple partitions - does the read benchmark work?

yeh It will do the read benchmark. I will have to re-test it later when my computer starts messing up again. I recently

rebooted. >_> lol

readgh7.png

-have you tried your internet connection on a different computer?

-could you try the download with a download manager (like orbit,internet download manager etc.) and see if the problem persists?

-instead of saving have you tried to open the file directly ? does that also cause a stutter?

-yup, I currently have 3 other computers and xbox live running fine. =x lol

-I will have to test out the 2 other suggestions sometime today. Can you recommend a good download manager? x)

I will test that out later today for you.

when I try to run the benchmark I get this alert.

hdscannn6.png

my hd was setup like this from the factory.

hdkp9.png

I would try to rerun the test but sign in as the main administrator... It could be that you are using the limited user account. Or either that or create a shortcut to the program and right click choose run with different credentials... It is possible that you may need to be the main admin to run the test. Just a thought.

There should be something in the setup of the program to choose which drive. It is possible that it cannot write to the backup partition.(recovery).

just to add to the confusion of things just for my sake just how much actual DATA is sitting on your desktop only i ask this because a friend of mine had this same problem except on a desktop system it turned out he had some 16.67GB of data sitting on his desktop which was totaly filling up his video cards buffer and most of his system ram and pagefile he moved almost all of it but a bar a few shortcuts and that fixed his problem as everything on the desktop wether running or not uses up a portion of ram ergo the more you have the more ram you use till it spills into the pagefile

just to add to the confusion of things just for my sake just how much actual DATA is sitting on your desktop only i ask this because a friend of mine had this same problem except on a desktop system it turned out he had some 16.67GB of data sitting on his desktop which was totaly filling up his video cards buffer and most of his system ram and pagefile he moved almost all of it but a bar a few shortcuts and that fixed his problem as everything on the desktop wether running or not uses up a portion of ram ergo the more you have the more ram you use till it spills into the pagefile

I have roughly 15gb of music/videos sitting in folders located on my desktop. o.o I will move everything into the C:/ drive area and see

if it clears the problem. thanks Atlonite. ;)

btw, I've always downloaded everything to my desktops and never had any issues like this before. =/

I moved everything over to the C:/ drive and my computer is still freezing/jittering when downloading. ><

any other Ideas? :\

edit: I was able to run the file benchmark on hd tune.. I'm not sure if this will be of any assistance though.

image1ca2.jpg

Edited by Jigoku
Don't think this is the problem but have a look this is from another post.

https://www.neowin.net/forum/index.php?show...amp;p=589534294

Possibly DMA mode is not enabled on the drive- Just another shot in the dark.

ok, I'm looking at the device controller properties now. How do I tell whether it's in DMA or PIO mode? thanks redvamp.

In Xp it is under the device manager- then look under the IDE ATA/ATAPI controllers under the Primary Controller- Right Click choose properties then the advanced tab- See if it says DMA there (on your it may Say SATA instead of ATA) But check there for the DMA mode.

In Xp it is under the device manager- then look under the IDE ATA/ATAPI controllers under the Primary Controller- Right Click choose properties then the advanced tab- See if it says DMA there (on your it may Say SATA instead of ATA) But check there for the DMA mode.

I checked all through the properties and couldn't find anything saying dma or pio.

image1rt4.png

It could be under the two that say IDE Channel- There should be an Advanced tab on one of them- Also look at the one that says Hard Drive- Vista may put it there.

Also on there check to see under Policies- Optimize for performance and write cache is enabled- That is the way my Xp is set but worth a try on your system.

If you read it - It says This setting improves disk performance , but a power outage or equipment failure might result in data loss or corruption.

You said-

My computer would even freeze before downloading.. o_o as soon as I click on a link and the " save now" dialog box appears it will freeze.

That may speed it up or worse case it will still do what it is doing.

Edited by redvamp128

You probably could go with the first check mark-- see if it improves-- sorry I may be in and out tonight it is supposed to storm here-... But I probably would not do the one that says Advanced performance...Unless the first check mark does well- You should not have to worry about the power outage since it is a laptop. Just make sure that you stay plugged in.

Try the first check mark see if it improves...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This might work, but the boot menu F12 only shows hdd and dvd+/- and Niks In the bios all usb are enabled. the usb stick is in place and in the boot menu it does not show up in the bios boot order.
    • Because we were never offered a UFC game to review it in the past. Sometimes it's not a conspiracy, the reviewer does not even live in the U.S. and didn't ask for it.
    • Apple releases iOS 27 Beta 2 for developers and power users by Aditya Tiwari It's been a couple of weeks since Apple previewed the iOS 27 update during the WWDC official keynote. The upcoming iOS version will bring even more refinements to the Liquid Glass design language, an upgraded Siri AI assistant, and several new Apple Intelligence features. Interestingly, the latest WWDC keynote was different than previous years. Apple has released the iOS 27 beta 2 (build 24A5370h) for developers who want to test the new features being baked for the iPhone and optimize their apps. If you're interested in downloading the latest beta, go to Settings > General > Software Update > beta Updates, then choose iOS 27 Developer Beta. You can download the latest iOS 27 beta on more than 30 supported iPhones. Make sure you know what you are doing since developer betas can be unstable and unexpected at times. If you want to be on the safer side, you can wait for the public beta, which will arrive next month. It's been a while since Apple discontinued its AirPort router lineup. Now, the company said in the iOS 27 beta 2 release notes that the AirPort Utility is deprecated and won't be available for new downloads from the App Store. Apple added that if you previously downloaded the app, you can re-download it. However, the functionality isn't guaranteed when using the AirPort Utility on iOS 27 or later. Speaking of known issues, Apple said that the Portrait mode blur effect might render incorrectly for photos; you may be unable to stop an alarm from the lock screen without unlocking your iPhone; the "Add a Control" button in Control Center edit mode might appear small or clipped. There are several new features in iOS 27 beta 2 as well. It comes with Neural Engine improvements for Apple Intelligence, including better performance when loading large models over 1GB. HomeKit Secure Video recordings are processed on-device and through Private Cloud Compute for video descriptions and search, when Apple Intelligence is enabled in the Home app. That said, you can also download the second betas of macOS 27 Golden Gate, iPadOS 27, watchOS 27, and other Apple operating systems.
    • FSR 4.1 is insanely superior to FSR 3. Like, FSR 4.1 Performance looks better than FSR 3.1 Quality. It's great they are finally enabling it for RX 7000 users. A bit late, but I guess better late than never.
  • Recent Achievements

    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      80
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!