New Quad-Core build, decisions about GPU/Case/Mobo


Recommended Posts

Those temps look alot better. Gotta love those push pins. :angry:

Lol, seriously, I know when I did my last build the heatsink did not require that much work.

I had to take the motherboard out to hold the back/bottom of the board while I pushed the pins in. It took a lot of effort to make sure I didn't break it.

Lol, seriously, I know when I did my last build the heatsink did not require that much work.

I had to take the motherboard out to hold the back/bottom of the board while I pushed the pins in. It took a lot of effort to make sure I didn't break it.

I refuse to use the intel stock cooler because those push pins are such a pain to deal with.

I refuse to use the intel stock cooler because those push pins are such a pain to deal with.

What cooler do you use? I think I may end up getting a different one eventually, but probably not for a while.

Lol, seriously, I know when I did my last build the heatsink did not require that much work.

I had to take the motherboard out to hold the back/bottom of the board while I pushed the pins in. It took a lot of effort to make sure I didn't break it.

I attached the fan for my E6550 with the mobo out of the case (it was a brand new build), but I just swapped it out for a E8200 and didn't have to remove the mobo. I had the pins in the "locked" position and pushed them in until I heard the click.

The E6550 is going into the wife's new build in a week or two.

I did like the older retention method with "tabs" on the side of the socket, clip one side and hold it with a finger while using a small flathead screwdriver to push the other side of the clip on.

I had another question, I have all four DIMMs filled with 2GB sticks of ram. I've read at a number of places that a lot of NB's have issues when all four DIMMs are filled and the recommendation, including gwai lo's (I think) was to up the voltage for the NB.

I was hoping someone could help me identify the setting in the BIOS as I'm not sure what it's called. Is anyone familar with the Gigabyte bios setting for the NB voltage? I think it uses an Award bios but I can't remember for sure.

I found the voltage settings, but there are a bunch of acronyms and the explanations aren't very clear.

Well you are supposed to do two at at time (two opposite corners at a time) to have even pressure. :p

I actually had to remove the motherboard to hold the bottom firmly around the holes so that I could push the pegs though.

I found the voltage settings, but there are a bunch of acronyms and the explanations aren't very clear.

What are those acronyms and explanations that aren't very clear? We can't help if you don't tell us what it is :p

Haha... yeah, sorry Shift, I'll post again when I have those acronyms... I'm away from home again so I won't be back there until Thursday. I'll have this weekend to work on it but I'll try to look at the BIOS on Thursday night and I'll post what I see in the BIOS relating to voltages then.

Actually, I kind of want to install Windows XP on the system to check if sleeping/resuming works fine in XP and to see if some of these hangs on shutdown/startup go away while using XP SP3... then I wanted to install Vista x86 to see if I have any of the same problems as well, and then finally re-install Vista x64.

I'm just not sure if I have any bad components, but I also want to run Memtest86 as well, that checks more than just the RAM though right?

I think I've decided to just try another motherboard since I am having so many problems with the machine... and I don't want to wait too long because then I won't be able to get a refund for the one I have.

Any other recommendations?... I don't mind paying more for a better board. I was thinking maybe a good ASUS or EVGA board.

I found these two ASUS boards that seem alright and aren't too expensive:

http://www.newegg.com/Product/Product.aspx...N82E16813131296

http://www.newegg.com/Product/Product.aspx...N82E16813131299

Edited by Chsoriano

I ordered the P5Q Pro, I'm going to install it and try it out Friday and if it works better than I'm gonna keep it. I'm hoping it does. Depending on how that goes I will ship one of the motherboards back to Newegg on Saturday.

Anyone know if the P5Q Pro is regarded as better than the Gigabyte GA-EP45-DS3R?

P5Q Pro is high end I believe, which would more likely compare with Gigabyte's EP45-DQ6. Not that there's necessarily a direct comparison.

The P5Q-E would compare to your current DS3R.

P5Q Pro is high end I believe, which would more likely compare with Gigabyte's EP45-DQ6. Not that there's necessarily a direct comparison.

The P5Q-E would compare to your current DS3R.

Okay, well I just wanted to make sure it was as good or better than the board I have now... So I'm hoping that I don't have the problems that I'm currently having. I just needed to get one soon so that I can still return the Gigabyte board should I choose to do so.

I put the new P5Q Pro in my system... and I love it, even the Express Gate works which a lot of people were complaining didn't work... I'm really glad I bought this board now. At this point I really wouldn't care if Newegg didn't give me a refund for my Gigabyte, but I really hope they do... it's within the return period so I don't see why they won't.

Glad that you got your system working. I'm starting to think you would have been fine if you just RMA the Gigabyte board. But that ASUS board is excellent from what I've read.

Yeah so far it's been a smooth ride setting it up (except for that damn heatsink again :angry: ) lol, but oh well.

The only problem I had was an error on boot every time about the Marvell SATA device. I realized that simply disabling it however would work just fine.

I did want to thank you Shift, and gwai lo, and everyone else who offered advice and opinions... thanks a lot.

Here's to hoping everything keeps going well.

Thank yourself as well for actually being smart enough to read up on stuff as you should :) So many people don't put the time into researching and complain later on lol

Yeah... I run into a lot of people who don't do research on their own... but I know I missed some things when I was getting ready to build this machine... I didn't know about the voltage settings for ram/cpus before shift recommended that article to me. To be honest, the most frustrating part was the damn heatsink, lol.

The hard thing for me was that I only have the weekends to work on the machine, I've spent only about 4-5 days total with the machine since I built it two weeks ago... so that made it kind of hard. I tried to find out everything I could during the week so that I kind of knew what I was going to do on the weekend :) Oh well, I am glad that this new motherboard fixed absolutely all of my problems... machine sleeps fine, resumes, starts and shuts down fine. It's perfect now.

Hopefully I'll start OC'ing once I get back from my internship :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • As I've been usually saying lately - we all can thank "AI" for this.
    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!