Contemplating the future of the Macbook line, as a Macbook owner


Recommended Posts

Over the past little while I have been wondering what the future holds for the Macbook line of laptops. Are they going to get rid of the plastic casing and convert it to Pro style aluminium like some rumours say? Are they going to make further changes for better or for worse?

Anyways, I'm a current owner of a black Macbook Core Duo 2.0ghz with 1GB RAM. Here is my current dilemma:

I want to either replace this Macbook with a new one when my 3 year warranty expires (September 2009), in which case I would not spend any money on upgrading my current one to perform any better.

OR

I want to upgrade my RAM to 2GB (buy two new 1GB sticks to replace my current 2x512mb), and replace my hard drive to a larger capacity (currently it's 100gb, which is nowhere near enough if I want to run Boot Camp).

My only limiting factor is that it is indeed a 32bit machine. If I had a Core 2 Duo the decision would be a lot easier.

Anyways, what do you guys think? I know I still have a year before I'd have to replace it but if I'm keeping it I may as well upgrade now.

I'm a fairly new MB owner a white 2.4GHZ, and while the news of a chassis re-design makes me a little ticked, I also know mine won't be immediately the old model, Apples tend to not age like that, also it likely will end up being replaced by a MBP in 2009 anyways.

Well see that's the thing. I'd be ticked about a chassis redesign as well, but probably for different reasons. I personally love the casing of the current Macbook (the black one at least). It's beautiful and it feels strong and durable. If they make it look like a Macbook Pro, I would lose a lot of interest in it just like that. Not a fan of that brushed metal look.

Well see that's the thing. I'd be ticked about a chassis redesign as well, but probably for different reasons. I personally love the casing of the current Macbook (the black one at least). It's beautiful and it feels strong and durable. If they make it look like a Macbook Pro, I would lose a lot of interest in it just like that. Not a fan of that brushed metal look.

I have to agree, I own a Macbook Pro and love it and think that yes it should be brush metal or whatever because they look awesome like that, but I'm about to buy another Macbook Black because when studying and on the move more they are small but also they don't seem so easy to scratch, I dunno you just get the feeling that they are good for on the move, and that you need to be careful with the bushed metal so you dont scratch it.

Edited by offroadaaron

Apple products hold their value extremely well (granted they are still in good condition), so your current MacBook should sell quite well whenever you decide to upgrade.

I'll be upgrading once my AppleCare expires, which is early 2011. I imagine the MacBook portfolio will have evolved substantially by then :laugh:

I want to either replace this Macbook with a new one when my 3 year warranty expires (September 2009), in which case I would not spend any money on upgrading my current one to perform any better.

Sell your machine sometime around, I don't know, September 2008 when you have one year of AppleCare left...this gives you a bit more marketability as the machine still is under warranty and can command a higher price. This will soften the price even further on a brand new MacBook / MacBook Pro / MacBook Air / MacBook Touch / MacBook Lick. ;)

Hmm, interesting tips... But the thing is I'm not disappointed with the performance of my current Macbook. I just know that it's not too future proof (lack of 64bit)... If I got rid of this one in a few months, I'd just basically be getting something very similar (Core 2 Duo instead of Core Duo, more RAM, bigger HDD) two of which I was going to do to my current one anyways.

Bah, I think I just complicated my situation even more right there.... Ironically enough, as I speak my Macbook is at an Apple Store for repairs (finally doing something about the electrical buzzing sound.. logic board replacement).

I think I've decided to keep it around because I don't actually have any way of justifying buying a whole new laptop for the sake of 64bit...

I was thinking I would just try my best to do a clean up of my hard drive to get rid of all the junk I don't need (that won't really do much but I'll try) and buy a 2gb RAM kit.

Any suggestions for what brand is a good brand for Macbook RAM? I have a Core Duo Macbook.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
    • It's funny when thieves accuse other thieves of stealing. Ai companies just blatantly siphoned all the knowledge of the internet without consent and are now selling it with their service... so excuse me if I find this a bit ironic.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!