Recommended Posts

download.php?file=post-19034-1217347797.jpg&name=31GhLHhdDpL._SL500_AA280_.jpgdownload.php?file=post-19034-1217349364.jpg&name=PN50A450_dimension_20080417.jpg

Samsung PN42A450P

Manufacturer: Samsung

Part number: PN42A450P1DXZA

Short Specs:

Product type: Plasma TV

Diagonal size: 42 in

Dynamic Contrast Ratio: 1000000:1

Image contrast ratio: 2000:1

Resolution: 1024 x 768

Image aspect ratio: 16:9

I had been looking to purchase a newer HDTV for a little while, but have not decided for sure when I wanted to buy one. Recently I was in Best Buy and started looking and decided to make a purchase. Although this TV is only 720p the image quality is unbelievable :whistle: . I currently have my TV connection (HD Comcast) connected via HDMI, as well as my DVD player. The picture can be easily seen from nearly anywhere with a 175 degree viewing angle. I really was leaning towards an LCD however comparing the two TVs (Sammy LCD vs. Sammy Plasma), I thought the plasma had a better picture.

I know there are debates on what size you will notice the difference between 720 and 1080, however both my wife and I could not tell comparing TVs in this size range.

I really have not tested the internal speakers, due to having a surround sound system. I had it on for maybe 30 seconds before turning them off from the internal menus. If anyone is curious about it let me know and I'll re-enable them to test.

This TV also is 3D Ready, it requires an optional piece but from what I read it gives you the benefits of both a flat-panel set and 3D movie viewing and gaming. I don't know if I'll purchase the add-on but I'm curious about how this works.

I give it a :star: :star: :star: :star: :star: rating . It is a great plasma HDTV for the money and I am very happy with it. I bought the service plan for a low price and I recommend it.

I'm leaning towards mounting it soon to my wall but I have to figure out where in the living room I'm going to move everything prior to fixing it for good to the wall.

If anyone would like any additional details let me know, or to see a image let me know and I'll snap some.

Full Specs:

VIDEO

Screen Size 42"

Resolution 1024 x 768

Contrast Ratio 1000000:1

Viewing Angle Over 175˚ (H/V)

DNIe? Yes

Digital Noise Reduction Yes

Brightness 1500 cd/m?

FilterBright Yes

Screen Aspect Ratio 16:9

Number of colors(expressed) Natural True Colour (18bit)

Grey Level(Gradation) 262144

Cinema Progressive (Film mode) Yes

Silhouette Editor (False Contour Reduction) Yes

Digital Comb Filter Yes

Edited by J0HN
Link to comment
https://www.neowin.net/forum/topic/652176-purchased-a-samsung-plasma/
Share on other sites

Ouch, 1024x768, that's even lower than most 720p LCD... Mostly they are 1368x768.

Yeah :/ ; although so where many other plasmas from different brands when i was shopping around. It seemed either TV Brands that were cheaper brands; or the price was more costly had the 1368x768 resolution. Its still a great looking picture and price wise was a good deal

Yeah like i said some other ones had it; actually more than i thought at circuit city and best buy.

Most 42-inch plasma HDTVs have a resolution of 1024x768; 50-inch sets have typically had 1366x768 resolutions, but some new plasma TVs have a still-higher resolution of 1920x1080.

Best Buy tried selling this package for $300 that they said it calibrates the TV. From what the sales guy said it adjusts colors to get a better picture and to save power.

Does anyone here know anything about this; or has had it done. I declined it because I thought it was a waste to have someone adjust colors.

Any Samsung people (LCD/Plasms) or Plasma owners did you just leave the normal settings or change some. I've messed around for a while last night seeing if I could get a better picture but I dunno if im just better off leaving it alone.

Does anyone here know anything about this; or has had it done. I declined it because I thought it was a waste to have someone adjust colors.

Any Samsung people (LCD/Plasms) or Plasma owners did you just leave the normal settings or change some. I've messed around for a while last night seeing if I could get a better picture but I dunno if im just better off leaving it alone.

check over at the AVSforums... there are dedicated threads on how to calibrate certain model tvs... if not check around the web for the settings... I know CNET had the exact calibrations for my tv that i just got... if all else fails... there is a dvd you can buy to calibrate your tv... will cost ya.. but not the $300 ...

ouch man... 1024x768 on a 40" can't really be that good :\

our 32" LCD is 1366x768 and it's great. my dad's 40" LCD is also 1366x768 and the pixels start to get quite big.

i'm sorry but you can't really call what you have a HDTV. it's something between EDTV and HDTV. and you're missing about 150,000 pixels to get close to 720p :\

ouch man... 1024x768 on a 40" can't really be that good :\

our 32" LCD is 1366x768 and it's great. my dad's 40" LCD is also 1366x768 and the pixels start to get quite big.

i'm sorry but you can't really call what you have a HDTV. it's something between EDTV and HDTV. and you're missing about 150,000 pixels to get close to 720p :\

So Samsung labeled it wrong then?

Link to Samsung

As far as every article I've read High Definition usually refers to 720 vertical lines of video format resolution or more.

Also comparing LCDs to Plasmas is not "apples to apples"

Most 42-inch plasma HDTVs have a resolution of 1024x768; 50-inch sets have typically had 1366x768 resolutions, but some new plasma TVs have a still-higher resolution of 1920x1080

Edited by J0HN

unfortunately for their labeling theory, videos are composed of two dimensions. the whole 720p/1080p only refer to the lines because it's assumed that anyone going for the standard will implement a 16:9 aspect ratio on their resolution.

so, HDTV is 1280x720 and 1920x1080 AT LEAST.

if you were to have a screen that's 900x800, you couldn't call it HDTV because even though it's 800p, it lacks significant horizontal resolution. a result of this is that any hi-def video played on this screen would have a significant portion of its vertical lines simply cut off. same happens to your TV. HDTV is at least 1280 in vertical lines and you only have 1024. your TV will display the horizontal lines perfectly (even better than the 720p standard) but the vertical lines will be lacking.

ouch man... 1024x768 on a 40" can't really be that good :\

our 32" LCD is 1366x768 and it's great. my dad's 40" LCD is also 1366x768 and the pixels start to get quite big.

i'm sorry but you can't really call what you have a HDTV. it's something between EDTV and HDTV. and you're missing about 150,000 pixels to get close to 720p :\

nah. 720 (proper anyway, lot of plasma chat with the horizontal rez at 50 and below) is enough for 42 inch an below, unless you sit right in front of the TV ich you aren't supposed to, it's not a cinema screen. at normal viewin distances for a 42 inch and living room you won't notice a real differnce between 720 and 1080. once you hit 50 I probably would want 1080 but I could live with 720 if I had to since size is more impressive anyway :p

Alright well I'm just posting this for posting sake, and then hoping someone will answer my question about the calibration.

Your evidence of this supposed gaff was that the my TV question featured a resolution of only 1024x768 pixels, when "everyone knows" that the minimum resolution of HDTV is 1280x720 pixels (a.k.a. "720p"). But your argument was flawed based on a couple of bad assumptions: a.)that all pixels are the same shape and b.)that the ATSC standards of digital television broadcasts have anything to do with whether a set can be called an HDTV.

In the year 2000, in an attempt to standardize the terminology and usage of the term "HDTV," the Consumer Electronics Association (CEA) defined four criteria that must be met in order for a display device to be called an "HDTV."

These criteria are:

  • The ability to receive ATSC terrestrial digital transmissions and decode all ATSC Table 3 video formats
  • The ability to display vertical scan lines of 720 lines progressive (720p), 1080 lines interlaced (1080i), or higher
  • The ability to display an image in a widescreen 16:9 (width:height) aspect ratio
  • The ability to receive, reproduce, and/or output Dolby Digital audio

If a set meets these criteria (which the Samsung does), then it's an HDTV. Period.

Just taking into consideration the set's resolution (1024x768) you would think that it has a 4:3 aspect ratio (non-widescreen), but this would only be the case if the plasma pixels were square in shape. They're actually not - they're rectangular as are the pixels of 95% of all the 42-inch HDTV plasma panels on the market today. 42-inch Plasma HDTV models made by Pioneer, Panasonic, Vizio, Philips, Samsung, Magnavox, etc. all feature the same 1024x768 resolution.

Larger size plasmas (50 inch and up) use square plasma pixels and offer resolutions of 1366x768 pixels or 1920x1080 pixels (1080p). But in the 42-inch size, 1024x768 is the most common HDTV resolution. To date, only Panasonic has come to market with a 42-inch plasma panel with more pixels, and they pushed it all the way out to 1080p (1920x1080 pixels) with the TH-42PZ700U.

The overall image quality has less to do with the exact number of pixels then it does with other factors such as color accuracy, contrast, moving image reproduction, color depth, and the quality of the set's on-board video processor which converts the incoming HD and SD resolution sources to the native resolution of the panel.

Anyway, back to my question from before....

Has anyone else here done this with their Samsung? Any concerns I should be addressed with doing this?

So, if you have a 42" LCD HDTV that can do FullHD 1080p 1920x1080 and a 42" Plasma HDTV at 1024x768, from the same sitting distance, we are to understand that both picture will look the same? No missing details?

Even if you forget about black levels and color saturation, you still miss something...

1920 * 1080 = 2073600 pixels

1024 * 768 = 786432 pixels

Missing pixels on the Plasma display = 1287168...

You only get 38% of the total pixels offered by FullHD.

So, if you have a 42" LCD HDTV that can do FullHD 1080p 1920x1080 and a 42" Plasma HDTV at 1024x768, from the same sitting distance, we are to understand that both picture will look the same? No missing details?

Even if you forget about black levels and color saturation, you still miss something...

1920 * 1080 = 2073600 pixels

1024 * 768 = 786432 pixels

Missing pixels on the Plasma display = 1287168...

You only get 38% of the total pixels offered by FullHD.

First what you are comparing are completely two different things. A 1080i LCD vs a 720p plasma. Most 42" plasmas are not going to have higher res. than what I have. I knew that going into it. Secondly; I would have loved to go 1080, however to find that in a plasma, let alone a Samsung plasma would have increased the price a lot more than what i was willing to spend.

Yes i didnt have to go plasma or prefer to go with Samsung, but I believe Samsung makes one of the best TVs out there; so dont look down on someone because they bought a better brand tv rather than going with a completly crappy brand to get a 1080 res.

one reason i preferred to get the plasma over an lcd was one; we watch a lot of movies and with football season coming of course that. Second, again personal preference I prefer the colors better on the plasma (i.e. black levels, high contrast, bright colors)

Okay; tell me my TV vs 720p LCD at 10 feet away (which is my couch distance) your going to notice the difference. I dont think so.

Secondly i know people love lcds; but between that and plasmas are two diff. technologies.

Lastly, I thought we covered this two / three posts ago. How about someone answer my question about calibrating plasmas or lcds for that matter. Its amazing how many threads get like this. Someone asks a question, and the topic gets flipped to something and it keeps going forever. I had stopped posting here a while ago for that reason, but missed Neowin so i came back and made some attempts to re-post.

I am glad w/ the purchase I got, the price was right, the tv is amazing and i feel i made a good choice. If you don't then that is yours.

Now once again, how bout someone keep this back on topic...

Is it worth spending the money to have a plasma / lcd isf calibrated? has anyone here done so. if so any feedback would be great.

Edited by J0HN
aww man that sucks that you got a plasma. I always suggest our customers that it'd be wise to go with LCD. Plasma's might have a better color image to start out with, but it costs alot to recharge them after 5 years of use.

The resolution really does't sound that good. That's what i have on my 19in monitor :p

Still sounds like a nice tv, at least for now. Good buy.

You clearly know **** all about plasma's.

Don't listen to what this guy says.

wait what ....thats so weird havent seen a plasma or lcd in that size range with that resolution for ages.... it mite b a hdtv but with 4:3 aspect ratio rather then normal 1.7something:1...so u might be watching everything in letterbox or ull have huge black bars.... as for the break- in even if they say no need to try not to use any dynamic setting for first 150-200 hrs and limit gaming to >1hr for the first 200 just to be on the safe side :)

and for what you spent on your tv(lookin on the specs)...IMO not worth calibrating, professionally, search up cnet or w/e or buy a thx dvd or something

I feel bad for anyone who believes that a DVD calibration even approaches the quality of a professional calibration, especially in the hands of an amateur. This isn't to say you can't get a better than stock quality out of a disc, it nowhere near compares to having it done right. Keep in mind professional services do quite a bit more than adjusting the basics in your picture menu.

everything i watch in HD automatically is shown in 16:9 not 4:3. As i said earlier rectangular as are the pixels of 95% of all the 42-inch HDTV plasma panels on the market today. 42-inch Plasma HDTV model, i think alot of people still are thinking LCDs here.

Anyway, i've changed a bunch of settings testing them out. Dynamic seems really bright so i have that off now; plus just to "break it in" anyways.

deuz, thats what i was debatng on was for spending 300 to have this set calibrated. I wouldnt have a problem doing it myself with a dvd, i saw monster had one for around 30 dollars, however im sure if i pay someone to do it i'd get better results.

Anyone else here calibrate their tvs? If so any feedback, worth the hassle?

I work with Plasma tv's all day and everyday.

The damn dvd menu's get burned into the screen if you leave them on for even 10+ minutes. and it takes at least an hour for it to fade away.

Apparently i know more than you, thats why you're being an ass head.

haha... ok then... tell me how to recharge a plasma exactly... and how often should you do it. :rolleyes:

Oh and why do they need to be recharged???

I cant wait for the response...

yeah the response should be good. I believe a key point here is i'm not a gamer. nor do i have a desire to hook my pc up to my tv. I have a 17" screen on my laptop which is more than enough.

i worked at circuit city about 3 or 4 years ago, and even then i dont think any of our TV guys told people they'll need to "recharge'

By few years what do you mean? Do you honestly think the ave. person watches 12 hrs of TV a day. I guess perhaps a family throughout the day combined; but we have the TV on maybe 4 hrs a day during the week. A little in the am before work, and little at night.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
    • In the way that you framed it incorrectly. You wrote: "The constant need to close all browser sessions and wait for a new version to install" There's no "constant need to close all browser sessions". That's factually incorrect. The browser downloads its updates in the background and installs them when you open it again. Silently. And there's no "wait for a new version to install", updates are small and take 2-3 extra seconds AT MOST, if any. If you have an SSD, there's zero extra time. Also, every mainstream browser operates this way. Firefox, the FOSS go-to browser, the default on almost every Linux distro, does exactly the same. Also, you don't need to constantly restart Edge for updates to install, you can completely ignore them and it doesn't even ask you to handle them, it's all silent and automatic. So I don't understand what else do you want.
    • DuRoBo Krono Review: Portable E-Ink reader with great ideas that need a bit of improvement by Taras Buria Phone-sized e-readers are gaining traction these days, with more people treating them as a getaway device to cure phone addiction (or at least they are trying to) or having a more pocket-friendly reader that is easier to carry and hold. The market now has plenty of such readers to choose from, and DuRoBo is the latest addition, a new player that offers a more interesting approach to the idea. The Krono is a $279 e-reader with an interesting twist, which tries to make the device more fun and ergonomic. Here is my review. Disclaimer: DuRoBo provided the review sample without any editorial input or pre-approval. The Krono comes in a phone-sized box with pink accents. Inside, you get the device itself, a short user manual, and a USB cable. The cable is a bit old-fashioned, Type-A to Type-C, which is a bit disappointing. Hot take: I would rather have no cable in the box rather than another Type-A cable that gets immediately thrown into my box full of similar cables I never use. The Krono also has no charger in the box, as it relies on accessories you already own, which is fine with me. Here are the specs: Dimensions 154 x 80 x 9.0 mm or 6.06" x 3.15" x 0.35" 173 g or 6.10 oz Materials Black or White plastic Display 6.13-inch E-Ink Carta 1200, 1,648 x 824 pixels, 300 ppi Touch-capacitive. Dual-tone frontlight. Processor 8-core Qualcomm Snapdragon 690 (QTI SM6350) 2 performance cores at 2.07 GHz 4 efficiency cores at 1.71 GHz Memory 6 GB Storage 128GB, non-expandable ~104GB available out-of-the-box Operating system Android 15 with a custom launcher Connectivity Wi-Fi and Bluetooth Battery 3,950 mAh battery Buttons and port USB Type-C port Power button, Volume button, Smart Dial Breathing Lights Audio Mono Speaker and Dual microphones In the box The Krono, a Type-A to Type-C cable, user manual Price $279 on Amazon First impressions Right off the bat, no, this is not a phone replacement. Do not approach this device thinking it can serve you as a dumb phone to cure your TikTok addiction. In addition to the fact that the Krono has no cellular connectivity, I strongly believe that no amount of extra devices can fix your phone addiction until you put some serious effort into it. The Krono is a phone-sized e-reader, a companion for your phone dedicated to reading without distractions. The DuRoBo Krono is made of plastic with a very fine texture. It is hardly premium, but I also cannot say it feels cheap. The device is also a bit thick, quite dense, and well-built without rattling or cracking. You get to choose between two colors: white and black. The front has quite thick bezels, which is hardly surprising for an e-ink device. These things use front light, with LEDs usually placed on the screen perimeter. While I do not mind thicker bezels, the notably larger chin cheapens the look a little. What I mind is a notable seam between the display and the main case, which, after just two days of use, collected plenty of dust and specks. The back of the Krono is what makes the device stand out. There is a cylinder (DuRoBo calls it the Axis) embedded in the back of the reader, housing three elements: a power button on the right edge, a Smart Dial on the left edge, and "Breathing Lights" on the back. An etched DuRoBo logo sits below the cylinder, and it is the only piece of branding you can find on the device. Overall, the design and materials are very unassuming, but the cylinder with additional control elements certainly elevates the look and makes it more interesting. Other physical elements include two microphones (one on the top edge and one on the bottom edge), a USB Type-C port, a volume rocker, and a single mono speaker. There is no fingerprint reader, so if you want to protect your device, a PIN is your only option. The official TPU case is not the most premium-looking Display The Krono has a 6.1-inch E-Ink Carta 1200 touchscreen display with a resolution of 1,648 x 824 pixels (300 ppi). The display is front-lit, and you can adjust the brightness and temperature from cool to warm. Unfortunately, the Krono lacks automatic brightness and temperature adjustments, and you cannot set a custom schedule for the frontlight. However, you can set it to always enable frontlight so that you can see what is happening on the screen when turning it on in a dark environment. On the bright side (get it?), the front light can get extremely dim so that the screen is barely readable in a pitch-dark room. The front light is also uniform across the screen, with no noticeable temperature gradients. I am very susceptible to uneven front light, and it is very easy for me to notice it, but the Krono is doing a very good job in this area. I also like that the edge shadow is not very prominent and barely visible in the black variant. E-Ink Carta 1200 is not the newest generation (there are Carta 1250 and 1300), but it is still a good display. It supports three modes: Clarity, Speed, and Quality. In Clarity mode, text is very sharp and easy to read, but you trade that for more ghosting, a slower refresh rate, and more artifacts when the display changes images. Speed mode, as the name suggests, boosts refresh rate and reduces ghosting, but fine print and text become more jagged. Finally, Quality mode is only available in Android apps. It has the lowest refresh rate, but in return, you get much better visuals, improved gradients, and more. Like brightness and temperature, you can toggle modes from the control center. It is available when swiping from the top-right corner of the screen (the top-left is for notifications). I also like that the Krono can work as a desk clock when not in use. It has a bunch of screensavers, including horizontal clocks with time, date, and current battery level. The screen refreshes once per minute, and battery drain is extremely low (not even 1% in 24 hours). It is a great use of the technology, and another thing I wish more e-ink devices featured. Smart Dial The Smart Dial is Krono's main party trick. It sits on the left side of the device and serves multiple purposes. You can twist or press it to perform various actions, depending on the current use case scenario. When reading books, twisting the dial flips through pages, and pressing it refreshes the screen. On the home screen, the dial adjusts the brightness, and holding the dial pressed launches voice note recording. Finally, a quick double press launches the DuRoBo AI chatbot. While the dial scroll is not notched, it is very smooth and has haptic feedback that confirms your actions, which feels very nice. As a long-term Apple Watch user, I love the idea behind the dial. It feels very natural and oddly satisfying to use, especially with that subtle haptic feedback. I never liked flipping pages with touch input, and I strongly believe each e-reader should come with some sort of physical controls for turning pages. The Krono has both volume buttons (which also work as page turners) and the dial, so you are free to use whichever you prefer. With that said, the dial is not perfect. For one, it sticks out of the case way too far for my liking, raising concerns about durability and longevity when carrying the Krono around in a pocket (it is a pocket-sized device after all). Also, it has too much wobble, which cheapens the experience and makes it feel a bit flimsy and unsecured. While there are two plastic guards on the Krono's case, they are way too small for any kind of protection. I also think DuRoBo should let users customize dial actions (the only available customization is scroll direction), particularly for long and double presses. Not everyone needs voice notes, and DuRoBo AI does not work without an active internet connection, leaving the long press essentially useless when offline. I do not mind these features, and I genuinely think they are useful, but I would rather have the ability to toggle between screen modes, turn the frontlight on/off, or launch my favorite app. I also agree with people on Reddit asking developers to let users adjust the dial sensitivity. I hope this is something DuRoBo can implement with a software update to make the experience more personalized (it is a Smart Dial, after all) and incentivize users to fiddle with the Dial more often. The Dial is a fantastic idea, so please, guys, improve it a little. As for ergonomics, they are mostly fine, but the dial's position may feel a little awkward and way too high. When I use a phone or a phone-sized gadget, I tend to rest one of its corners on my palm for a more secure grip. With the Krono, such a grip is impossible because you cannot reach the dial even with big hands. You have to lower the reader a bit and hold it like a bottle without any extra support for the bottom edge. Such a grip is not necessarily uncomfortable (the Krono is also light enough for it), but it requires a bit of muscle retraining. Sometimes, I do not bother with the dial and hold the Krono like my phone, flipping through pages with volume buttons, as they are perfectly positioned for my right-hand thumb. Interestingly, when testing the Krono, I would often find myself thinking that a roller embedded in the long plastic cylinder on the back of the device would have been a much more comfortable solution. There is a free idea for you, guys. Software The Krono runs Android 15 with a very minimal launcher on top. The home screen presents you with a list of apps, a scrollable list of widgets, and your user profile. Widgets can display time, calendar, or recent books for quick access. You can also add or remove apps from the home screen to keep the most useful stuff around without tapping "Apps." I like this minimalistic approach; it looks clean, easy to understand, and light. I understand that some may find the list of all apps way too clean, but fortunately, DuRoBo lets you switch to traditional icons. The reader also has a bunch of preinstalled apps: Read: The default app for reading. Browser: A Chromium-based browser. Files: A simple file manager. Music: A simple music player. Spark: A voice recorder with transcription support and AI summarization DuRoBo AI: A built-in AI chatbot. Transfer: An app for file transfer over Wi-Fi. If that is not enough, there is the Google Play Store, where you can download all the extra apps you need, alternative readers, podcast apps, chatbots, and more. DuRoBo is not trying to give you an all-in-one device. The standard software experience is quite minimal, which makes it easy to approach and learn. The standard reader supports EPUB, EPUB3, AZW3, MOBI, PDF, TXT, DOC, and DOCX, which is more than enough to let you read most books without third-party software. As for customizing the reading experience, you can select one of five built-in fonts, adjust size and thickness, adjust margins and spacing (only three variants for each), change text alignment and direction, toggle the reading status bar, and switch to dark mode. There is also text-to-speech, which utilizes Android's default TTS tech. While I like the simplistic approach, I cannot help but feel DuRoBo could have made the built-in reader a bit more customizable. However, I am not going to bog down on this, as you can always install any other reader you prefer using the Play Store or by sideloading an APK. Getting books to the Krono is very simple. Given that the device is an Android smartphone without cellular connectivity, you can transfer files via a USB Type-C cable, download them using the built-in browser, share them over Bluetooth, or use cloud storage. My favorite was the built-in Transfer app. It is simple, reliable, and very well-designed. I was surprised by how well-designed the web portal is. It is fast, pretty, and properly categorized. Well done! Once you have your books loaded, you can highlight or underline text, add annotations, bookmark pages, check the table of contents, and ask AI about the selected text. Unfortunately, the Krono has no built-in vocabulary, but again, that is something a third-party reader could fix. Overall, the built-in reader is light and snappy, with just the minimum amount of features for a regular user to enjoy reading books. The Krono has no built-in reading tracking, so stat nerds will have to look for third-party reading apps. However, you can set a daily reading goal, and the reader will notify you when you reach it (for example, one hour). You can also set a reminder to read at a certain time, and when the time comes, the Krono will light up its back LEDs and unlock itself to nudge you. Other than that, the rear LEDs do nothing, not even showing charging progress, which is an unfortunate misopportunity if you ask me. Quirks aside, Krono's Android runs quite snappily and bug-free. Early reviews of the Krono criticized its Android 13-based software quite a lot, but now, the reader runs Android 15, and its software has fixed plenty of initial complaints. I never experienced any issues with built-in apps. AI attempts The DuRoBo Krono comes with a built-in AI chatbot. There is no information on what model powers this thing, but the system says it was "trained by Google." You can launch the bot from the app list or by double-pressing the dial. It works just like any other chatbot, and you can ask it anything by typing or using voice input. The AI saves your chats, and you can rename, export, or delete them. DuRoBo AI requires an active internet connection, and it does not work offline. Its reach and capabilities are also limited. You can only chat in the app and use it in the reader app as a makeshift vocabulary. However, the implementation is kinda awkward. You can only send a selected portion of text to AI without giving it any requests or instructions. I highlighted the word "dumb," and it apologized to me for not being useful. You also cannot ask follow-up questions or send the generated response to a separate chat. The chatbot is also slow, even with fast Wi-Fi, making the overall experience quite frustrating, which makes me again wish for the ability to remap the double press to something else. Spark, the standard voice recording app, also uses AI for note summarization and transcribing. Neither feature works offline, unfortunately. Spark records notes up to 30 minutes using Krono's dual microphones, and you can rename or export notes. Transcription quality is decent, and the speed is alright, but you can find much better solutions in the Google Play Store. What I like about Spark is that transcribed notes are not locked, and you can always type more to elaborate on your ideas, which is handy. Overall, I like that the Krono is not shoving AI down my throat, but to be honest, there is really not that much to shove. AI features here feel raw and need improvements to be more useful. Battery Life Like most E-Ink readers, the Krono has fantastic battery life. Even with a clock as a screensaver, its standby power consumption is incredibly low. And when in use, you can get weeks of reading on a single charge. Without the front light, my unit never sipped more than one or two percent of battery during a one-hour reading session. It was nice to see plenty of battery-related settings. You can limit charging at 80% to protect battery health long-term, check the number of charging cycles, manufacturing/first-time use date, battery health, and the maximum capacity. Additionally, the Krono lets you select what hardware remains enabled when sleeping. This lets you keep Wi-Fi and Bluetooth on (say, if you want to receive notifications, for some reason) and keep audio playing when locked. Turning these features off effectively eliminates any standby battery drain. I left my Krono sitting for 24 hours with a clock screensaver on, and it did not drop a single percent. The pretty big 3,950 mAh battery justifies the device's thickness and ensures you do not have to charge it for long periods. Speaking of charging, it is capped at only 10W, which is a bit disappointing, as getting such a big battery to 100% takes a notably long time in the era of super-fast charging smartphones. DuRoBo Moodi The Moodi is a standalone, optional accessory for your Krono. It is a wireless remote with two customizable buttons that you can use to flip pages, control media, or scroll webpages. The accessory connects via Bluetooth. Despite having a built-in rechargeable battery, it is extremely light. While the Moodi's shape and form factor is not what I would call particularly ergonomic, it is not uncomfortable to hold and use. The Moodi comes with six removable magnetic buttons with various smiley faces. Buttons sit securely, and they have nice-feeling, albeit a little loud, clicks. It is a cute touch that adds a little more fun and character to the device. There is also an accented power button and a single status LED. The latter displays charging status and connection mode. The Moodi supports three modes: Reading: Buttons work as volume buttons, allowing you to flip pages in the built-in reader or other apps that support page turning with volume buttons. Media: Buttons work as skip forward/backward, which is useful when listening to audiobooks, podcasts, or music. Scroll: The third mode lets you scroll pages in the web browser or any other application The Krono properly detects the Moodi and presents you with an on-screen guide when you connect it for the first time (it also displays the battery level). However, you can only change modes by holding both buttons for a few seconds. It is also worth noting that the Moodi works with other devices. I connected it to my iPhone and it let me adjust volume or control media playback. Sadly, the scroll did not work, so you cannot use it to waste time scrolling TikToks. Overall, the Moodi is a cute little accessory, which I can recommend for those who read a lot. It is very useful for remote page flipping when you do not want to burden your hands by holding the Krono all the time. I only wish DuRoBo included a lanyard for the built-in loop. As for the battery life, after using the Moodi for a few days, I only managed to drop several percent of its 90 mAh battery. Despite the small size, it is rated for weeks of use, which is pretty impressive. At $35.99, I cannot say the Moodi is a must-have accessory, but I see the appeal. I prefer using the Krono with its Smart Dial, as I rarely read for more than 40-60 minutes in one sitting. However, if you have a stand and like reading for long periods, the Moodi is the right thing to have. It is a bit more expensive than regular page flippers on Amazon, but it is on par with similar products from Kobo or BOOX. Plus, it has a little more fun to it with removable buttons and better integration into the Krono. Conclusion At the end of the day, DuRoBo Krono is a nice pocket-sized e-reader. Its software focuses on the main things without trying to be everything at once. The smart dial idea is unique and great, and I wish more manufacturers had something similar in their devices. The display is also good, with an even frontlight and "always-on" support. I did not notice any deal-breaking issues with the Krono. However, you can feel that the idea needs some improvements, such as a slightly stiffer dial in a more ergonomic location, perhaps a little more premium materials, and better software customization. I hope the company won't give up on the idea and improve the dial and ergonomics in the second generation. Buy DuRoBo Krono Black - $279.99 on Amazon Buy DuRoBo Krono White - $279.99 on Amazon Buy DuRoBo Moodi - $35.99 on Amazon As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      195
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!