Recommended Posts

Shadrack is right man. I have a 42" Panasonic Plasma, same exact specifications as yours and I couldn't be happier with it. the HD channels look just awesome, even the SD channels look better than an SDTV.

I couldn't be happier with my purchase.

likewise...now im debating if i want to mount it or not.

you plan on watching it from different angles? does it have a swivel base? if so, couldn't the swivel base movement be enough?

(disclaimer: i didn't mount my TVs cause i don't watch them from multiple places :p)

I feel bad for anyone who believes that a DVD calibration even approaches the quality of a professional calibration, especially in the hands of an amateur. This isn't to say you can't get a better than stock quality out of a disc, it nowhere near compares to having it done right. Keep in mind professional services do quite a bit more than adjusting the basics in your picture menu.

so what your saying is.... you buy a low-mid range tv (eg: 1000- i dont know what the pricing is like where u come from so im just making an assumption here) and then spend 250-300 on a professional calibration...:s .. i dont see the logic for people on budget.... calibration dvds or jus playing around with the settings...where you pay next to nothing would be better for the OP in this situation

say if your were buying a higher end tv, i would understand getting the tv professionally calibrated.

I work with Plasma tv's all day and everyday.

The damn dvd menu's get burned into the screen if you leave them on for even 10+ minutes. and it takes at least an hour for it to fade away.

Apparently i know more than you, thats why you're being an ass head.

you must of old stock........oooooooold stock :D.... rarely see IR on the screens we have though we dont leave the menu running for more then 10 mins ;)..... like anything look after it and itll work forever...so to speak :p

as for your other posts knockin on plasma's you must be living back in 2000 or something wher plasmas were IR crazy... your posts are quite laughable about IR... we had a 50'' plasma hooked up to a PC for around a week and dont think we ever had a problem of IR though we didnt keep it stuck on desktop for a whole day :p

also now days if there is IR on ur plasma running normal programing for while gets it to fade away samsung, pana, hitachi, pio all seem to do alrite most of the above also have pixel shifting or logo screen savers/oribiters screen or w/e when a dvd is paused so chance of ir is reduced.... as i said for the start keep brightness a bit lower then usual, keep the screen full, try not to game for a bit and i doubt youll get IR and mate i know for a fact TVs in-store are nearly always on default which is normally dynamic.... i just dont like it when people get on there high horse and think they are know all-end all :) samsung are pretty reliable tbh :)

if i said anything wrong please correct me, THOUGH i dont want to take this thread away from OP :)

as for mounting thats totally ur decision depends on your room, how your going to use your tv .etc. i like wall mounts but if you have a swivel base.....well use it! :D

i just wnoder when bangbang will raid this thread :D

I want to mount it because I like the way TVs look mounted. I think it gives the room a much nicer feel if you know what I mean.

For now Im going to leave it on a glass stand that I have. I'm going to research more on calibrating though. My debate was is it worth doing it to my TV. Sure its not the most expensive TV but from what I read it can save power and prolong TVs (LCDs and Plasmas) even longer. I dunno...what i'll end up doing though.

Maybe we should ask BangBang what he thinks...ha

Edited by J0HN

yea wall mounting does open the room up and makes it kinda like a feature wall ....like in the magazines :p

your choice on calibration....ive never tried calibration dvds most of what i said has been second hand form other people..... just thought u should have a good think if the outlay is work the return :)

Nice TV. I wouldn't worry to much about the specs. I gave up on doing that a long time ago, I have seen 1080 panels which look like crap and 720 panels which look epic. Higher numbers don't mean better quality. Judge with your eyes it works best for me. As long as you are happy with the quality it doesn't matter :)

Wow the idiots sometimes.

That is a fantastic tv. I researched for weeks when I decided to buy a HDTV I read review after review narrowed down to 3 models and then searched for the best price. Then I actually went into a store to see them in person. The Samsung plasma had by far the best picture of any in the store even models costing 2.5x or 3x the price. The color and black levels cant be touched by a lcd. I also have a ps3 hooked up to it for blurays and gaming again its beautiful. Dont listen to the uninformed spouting about problems plasmas had 10 years ago. Todays breed has done away with almost everything negative about the old models. The only single thing i dont love about my set is that it gets pretty warm and im sure its sucking down quite a bit of electricity. Also I looked it up on avs forums and did all the suggested settings and then compared to default with my own tweaking and was more happy with what I did vs what was on the board. But its worth a shot you might be happier with "pro" suggestions. Always ENJOY your new purchase knowing the ones spouting crap are just jealous they got stuck with a lcd with an inferior picture.

Congrats on the purchase, enjoy! We have a 42" Samsung plasma in the living room @ 1024x768 - Sky HD looked nice on it when I plugged it in one night.

Personally, I'm an LCD fan for the 1080p (got a 40" Samsung LCD in here) but if you're happy with a plasma good for you! :) some of these people should STFU.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • All it does is use the CPU more efficiently during boot to speed up boot times. That's it. Yawn....
    • It's not a one or the other kind of thing. Software should run efficiently, and the operating system should appropriately manage the CPU clocks. You could have the best most optimized software on earth, and it will still run faster if the CPU does a better job of boosting as needed. All this is doing is pre-boosting the CPU based on user actions, instead of waiting for the normal detection mechanism to kick in. If the OS knows it is about to need more CPU, why shouldn't it use that knowledge? It's the same idea of downshifting before passing someone, instead of just burying your foot into the peddle and waiting for the transmission to figure out what you want to do.
    • Audacity 3.7.8 by Razvan Serea Audacity is a free, open source digital audio editor and recording application. Edit your sounds using cut, copy, and paste features (with unlimited undo functionality), mix tracks, or apply effects to your recordings. The program also has a built-in amplitude-envelope editor, a customizable spectrogram mode, and a frequency-analysis window for audio-analysis applications. Built-in effects include bass boost, wah wah, and noise removal, and the program also supports VST plug-in effects. You can use Audacity to: Record live audio. Record computer playback on any Windows Vista or later machine. Convert tapes and records into digital recordings or CDs. Edit WAV, AIFF, FLAC, MP2, MP3 or Ogg Vorbis sound files. AC3, M4A/M4R (AAC), WMA and other formats supported using optional libraries. Cut, copy, splice or mix sounds together. Numerous effects including change the speed or pitch of a recording. Write your own plug-in effects with Nyquist. And more! See the complete list of features. Audacity 3.7.8 changelog: #10688 Fixed an exception thrown when pasting into a newly-created track (Thanks, David Bailes (@DavidBailes)!) #10870, #10884, #10775, #10629 Fixed tone generation, waveform-scale setting, SetClip Name parameter, and clip-boundary command names for scripting and macros (Thank you, David Bailes (@DavidBailes)!) #11106 Fixed the loading of presets for the Distortion effect (A million thanks, David Bailes (@DavidBailes)!) #10947 Fixed paste into an empty audio track not preserving the source sample rate (Thanks, Juan Gabriel Colonna (@juancolonna)!) #10776 Allowed AltGr modifier in label and clip name editing (Thanks, Davide Peressoni (@DPDmancul)!) #9938 Added options to choose where silence is truncated (start/middle/end) (Thanks, Noah Rosenfield (@nosenfield)!) #9935 Added Podcast 2.0 chapters JSON export for label tracks (Thanks, Noah Rosenfield (@nosenfield)!) #10103 Improve UI on HiDPI displays on Linux/wxGTK (Thanks, Ivan A. Melnikov (@iv-m)!) #10099 Fixed MixerBoard Mute and Solo button display (Thanks, Ivan A. Melnikov (@iv-m)!) #10681 Fixed multichannel FLAC import #10999 Fixed envelope being broken after joining clips Download: Audacity 64-bit | Standalone ~20.0 MB (Open Source) Download: Audacity 32-bit | Standalone Download: Audacity ARM64 | Standalone View: Audacity Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • There really isn't anything magical about the low latency profile, other OS's do this as well. All they're doing is using your CPUs boost clock options in a more smarter way.
    • So we shouldn't have the option because of people using their laptops on battery? OK? LOL
  • Recent Achievements

    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done
    • One Year In
      highriskpaym earned a badge
      One Year In
    • Week One Done
      FBSPL earned a badge
      Week One Done
    • One Year In
      Jim Dugan earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      PsYcHoKiLLa
      198
    3. 3
      +Edouard
      155
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      71
  • Tell a friend

    Love Neowin? Tell a friend!