Users Report Firmware 2.42 Causing PS3 Failure


Recommended Posts

Users Report Firmware 2.42 Causing PS3 Failure

Reports of hardware failure seem to follow PlayStation 3 firmware updates as regularly as Summer follows Spring, but following the issues with firmware update 2.40 you can't be too careful. Multiple users over at the official PlayStation forums are reporting that their PS3 consoles are no longer reading discs following the 2.42 update last week. Some report that games play for several minutes after the update before the drive stops working, while others say the issue kicks in immediately. At least one forum-goer reported that performing a reset on his system fixed the issue, while others have tried with no luck.

It's pretty hard to get a good idea of just how many people are having the issue, what with the forum topic filled with "me toos" and claims that anyone reporting an issue is simply a troll. For the record, I just updated my system and have had no issues whatsoever. We've contacted Sony for comment on the issue, and will keep you all posted should further developments arise.

Source: Kotaku

2.42 has been out for over a week at this point... (8 days to be exact) and this is the 1st time I've seen anything related to it causing PS3 'malfunctions'

Another reason I won't believe the claims.. is cause with the big issue in 2.40, Sony pulled the update ASAP and 2.42 can still be dl'ed from the main site... also, 2.42 didn't change anything major all it did was "improve performance with PSN games" (what ever that means).

So I'm going to take this with a grain of salt

its gonna be the 1 person who did something wrong or used some dodgy theme, which attracts the other 5 out of the woodwork. People don't post to report that it works fine so you get a thread full of 'mines broke too', making a mountain out of a molehill!

Problem with news like this, much like the the Firmware 2.40 update that apparently killed hundreds upon thousands of PS3s, is that in the end most of the time, there aren't that many people having the problem, then it gets blown out of proportion and posted on many sites.

Not saying that this is the same, but I wouldn't be surprised if it is.

Reading through the US forums there are about 30 people having problems, so at least its not death to hundreds of machines so far.

It can get annoying when the news gets too big for what is actually happening, but at least it makes Sony move their butts to figure out a solution, but then that can rush them and cause more problems, seems to be a vicious circle.

Problem with news like this, much like the the Firmware 2.40 update that apparently killed hundreds upon thousands of PS3s, is that in the end most of the time, there aren't that many people having the problem, then it gets blown out of proportion and posted on many sites.

2.40 was a massive problem, no doubt about it. You can't use Neowin as an example when there is only 200K odd members registered here. And even then, there is only so many regular members who bother to post. If they took it offline the action speaks louder than words.

2.40 was a massive problem, no doubt about it. You can't use Neowin as an example when there is only 200K odd members registered here. And even then, there is only so many regular members who bother to post. If they took it offline the action speaks louder than words.

2.40 was defiantly a problem, big yes, but not huge, and I wasn't using Neowin as an example for anything.

And if they took the reporting to what was happening off-line, well, since these are being pushed through on-line updates, while yes some are doing it via PC, I don't see how the problems would be in a much a bigger scale.

If that is what you meant.

No issues here. Been running the update since it was released.

Hard to take threads like that seriously though when there are posts about lawsuits and about Sony deliberately coding firmware to break specific PS3s. A few people have an issue (which could be Blu-Ray Drive related in some cases) and instantly its blown out of proportion. Its cool to whine at Sony these days though.

2.40 was defiantly a problem, big yes, but not huge, and I wasn't using Neowin as an example for anything.

How do you distinguish between big and huge with this situation lol..

It was obviously a big enough problem to remove the update is what I'm saying, and it must have been pretty widescale also. I brought Neowin up because there was maybe 2 or 3 people who had the problem here. If you were to look at any other websites forum though, like IGN, the official PS3 or Gamespots etc, they were littered with topics/posts from people who did. Nevermind the people who aren't even active on internet forums/websites who just contacted Sony directly.

A lot of people here tried their best to downplay any reports and say how it wasn't such a big deal when obviously it was. Pretty sad really, it's like saying the RROD wasn't a big deal in retrospect.

How do you distinguish between big and huge with this situation lol..

It was obviously a big enough problem to remove the update is what I'm saying, and it must have been pretty widescale also. I brought Neowin up because there was maybe 2 or 3 people who had the problem here. If you were to look at any other websites forum though, like IGN, the official PS3 or Gamespots etc, they were littered with topics/posts from people who did. Nevermind the people who aren't even active on internet forums/websites who just contacted Sony directly.

A lot of people here tried their best to downplay any reports and say how it wasn't such a big deal when obviously it was. Pretty sad really, it's like saying the RROD wasn't a big deal in retrospect.

I distinguish Huge from Big, being that the consoles that are being updated are all on-line, so there are millions out there that might very well never be even close to being affected by the problem at all.

I'm not saying it isn't a serious problem, just that it isn't as much of a dooms day as I'm sure some peopel will amek ti otu to be.

And I've already made my opinion on the past Xbox360 problems in my previous post.

I wasn't trying to stir anything, honest rofl.gif

:rofl:

it wouldn't really explain why the issue is a week after release, and the issues are in extremely small numbers.

There are a million ways a simple Firmware update could mess up a piece of Hardware instantly or in the longer run.

Could be based on what games you play, what you download, which services you use, location - Could be anything after a firmware update.

There are endless possibilities, so there's no need to dismiss the Firmware either.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WinSnap 6.2.3 by Razvan Serea WinSnap is a fast and user-friendly utility for taking and editing screenshots. It easily captures windows with rounded corners and transparent backgrounds from Aero Glass on Windows 7 to Mica Material on Windows 11. Right after capture, WinSnap instantly enhances screenshots with professional-looking shadows, reflections, outlines, highlights, watermarks, arrows, shapes and text annotations. WinSnap runs on Windows 11, 10, 8, 7, Vista and XP (32-bit and 64-bit). It handles Aero Glass and shadows on all supported OS. Native 64-bit version is included in the setup package. WinSnap key features: Flexible screen capture capabilities Smoothing shadow effect in Photoshop style Powerful image processing and basic canvas transformations Support of various image formats and advanced auto-save options Easy Web publishing and E-Mail sending Multilingual user interface (Unicode based) Easy makes screenshots of windows with rounded corners WinSnap saves info about window form and adds real smoothing shadows. Alpha-Channel and PNG/TIFF transparency are supported. Unique "Application" capture mode allows you to capture all visible windows of the foreground application with one click. Unique "Multi-Object" capture mode allows you to select multiple windows on the screen and easy combine them into one screenshot. Basic coloring effects and canvas transformations. Advanced auto-save and auto-copy options. Configurable External Tools menu to open image editors and optimizers. Usual keyboard and mouse control (Print Screen replacement). Advanced resize feature: to width/height and to percentage Outline color and larger shadows for shapes and text Pixelate tool to hide sensitive information on screenshots Larger icons and buttons for high-DPI screens Number keys are used for tool selection now WinSnap 6.2.3 changelog: Added Czech language and polished 12 other translations Live window resize without "Processing..." text Optimized drawing of multiple complex objects on screenshot Improved shadow/blur generation speed on 4k+ resolutions Reduced memory usage in region capture mode Fixed an issue with reflection in 24bpp format Some other minor improvements and bug fixes Download: WinSnap 6.2.3 | 3.6 MB (Shareware) View: WinSnap Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Sandboxie Plus 1.17.7 / Classic 5.72.7 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.7 / Classic 5.72.7 release notes: Added added a Global Settings checkbox for ForceBoxDocs under Program Control > Force Process Options Changed disabled rich text acceptance in 'Edit ini Section' baa6968 extended completion system with context-aware filtering, improved INI key resolution, regex updates, and tooltip placement enhancements 6db2a04 Fixed fixed crash in VMware when running inside sandbox caused by NtQueryDirectoryObject hook returning non-null-terminated strings and uninitialized padding bytes in OBJECT_DIRECTORY_INFORMATION structures, which caused QueryDosDeviceW to crash in wcscmp #5390 Add short-name fallback cache and heuristics #5404 fixed addon setup not working introduced in a recent build fixed Starting from version 1.17.4, using the 'Sandbox with Data Protection' type box causes PowerShell to wait indefinitely, while there is no such bug with other types. #5408 fixed Importing encrypted box no longer creates encrypted image in v1.17.6 #5399 fixed EditorSettings fuzzy matching not applied, showing few/no completion entries, and table cell highlighting not updating fixed Error enumerating and deleting folder. #5406 fixed black box import/export when 'ProtectAdminOnly=y' (default) and SandMan does not run as admin Download: Sandboxie Plus (64-bit) | 23.3 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ocenaudio 3.19.2 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.2 changelog: Fixes a crash when starting the graphical interface without a display on Linux Fixes MP3 metadata encoding and ID3 tag writing issues on Windows Fixes a crash when loading audio with autosave enabled on Windows user paths containing non-ASCII characters Fixes a freeze when batch-processing more than 5 files with a 64-bit VST plugin Fixes some conditions in audio mixer Fixes loudness statistics for surround files and Short-Term Maximum Loudness accuracy Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.5 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.5 changelog: Fixed an issue where AnyDesk One windows would open in inconsistent positions Optimized dB bar rendering by synchronizing updates with the render timer Fixed a crash related to high volumes of incoming messages Fixed a crash that could occur when closing AnyDesk One from the tray icon Fixed an issue where certain special characters could disappear when formatting text in Chat Moved the "Jump to Newest Message" button to improve usability in Chat Improved notification delivery speed after sending a message in Chat Improved overall application stability Download: AnyDesk 9.7.5 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      238
    3. 3
      ATLien_0
      80
    4. 4
      Steven P.
      77
    5. 5
      +Edouard
      71
  • Tell a friend

    Love Neowin? Tell a friend!