OpenGL 3 & DirectX 11: The War Is Over


Recommended Posts

(For images, please see the web site....)

Introduction

Given the prevalence of DirectX nowadays, we tend to forget that 10 years ago an all-out war was being waged between Microsoft and Silicon Graphics in the field of 3D APIs. The two companies were both trying to win over developers, with Microsoft using its financial muscle and SGI relying on its experience and its reputation in the field of real-time 3D. In this modern David-versus-Goliath battle, the “little guy” won a precious ally in one of the most famous game developers–-Mr. John Carmack. In part due to the success of the Quake engine, solid support for OpenGL opengl became important enough to motivate makers of 3D cards to provide complete drivers. In fact, it gave 3dfx one of its early advantages and knocked ATI to the back of the pack as it struggled with its OpenGL support.

Meanwhile, Microsoft was starting from scratch, and the learning curve was steep. So, for several years, Direct3D direct3d ’s capabilities were beyond the curve, with an interface that many programmers found a lot more confusing than OpenGL’s. But nobody can accuse Microsoft of being easily discouraged. With each new version of Direct3D, it gradually began to catch up with OpenGL. The engineers in Redmond worked very hard to bring performance up to its rival API’s level.

A turning point was reached with DirectX 8, released in 2001. For the first time, Microsoft’s API did more than just copy from SGI. It actually introduced innovations of its own like support for vertex and pixel shaders. SGI, whose main source of revenue was the sale of expensive 3D workstations, was in a bad position, having failed to foresee that the explosion of 3D cards for gamers would prompt ATI and Nvidia nvidia to move into the professional market with prices so low (due to economies of scale) that SGI couldn’t keep up. OpenGL’s development was also handicapped by bitter disputes among its proponents. Since the ARB—the group in charge of ratifying the API’s development—included many different, competing companies, it was hard to reach agreement on the features to be added to the API. Instead, each company promoted its own agenda. Conversely, Microsoft was working solely with ATI and Nvidia, using its weight to cast a deciding vote if there was disagreement.

With DirectX 9, Microsoft managed to strike a decisive victory, imposing its API on developers. Only John Carmack and those who insisted on portability remained faithful to OpenGL. But their ranks dwindled. And yet a reversal of fortunes was still possible. It had happened with Web browsers, after all. Even when a company has maneuvered itself into a near monopoly, if it rests on its laurels, it’s not all that rare for a competitor to rise from his ashes. So when the Khronos group took over OpenGL two years ago, many hopes were rekindled with all eyes on the upcoming SIGGRAPH conference that year.

Last month, Khronos was to have announced OpenGL 3, a major revision of the API that’s supposed to catch up with Microsoft, which was also scheduled to launch its next-gen DirectX 11 API. But things didn’t really go as planned.

<snipped - see source for rest of article>

Source: tom's hardware

Edited by PureLegend
Link to comment
https://www.neowin.net/forum/topic/670942-opengl-3-directx-11-the-war-is-over/
Share on other sites

Until Microsoft releases their method on other platforms (or at least opens it up so it can be freely implemented by others who want to port it), it is OpenGL for me.

which they wont ..... they rather customer keep buying windows for DirectX upgrades/update ... for short windows exclusive and will stay that way .

what we call it ? oh yes locking in customers

which they wont ..... they rather customer keep buying windows for DirectX upgrades/update ... for short windows exclusive and will stay that way .

what we call it ? oh yes locking in customers

I call it business.

It's a better read on Tom's Hardware. It's not just a wall of text, and there are pretty pictures to help visualise wtf they're talking about.

That is why I posted the following at the top of the story:

(For images, please see the web site....)

Of course, you completely failed to see that; typical!

It's not about how pretty it is or how convenient it is for you, it's about the ad-revenue you're taking away from the original source.

Funny, but it is standard practice in the Breaking News section to post the content with a link.

Most of the time, it is complete text content, so no need singling out this specific post, or the thread starter. A discussion of this sort would need to be with Neowin Staff who set the rules and accepted practices.

That is why I posted the following at the top of the story:

(For images, please see the web site....)

Of course, you completely failed to see that; typical!

I didn't fail to see it at all. Just making a statement.

I my opinion, you'd have been better off just posting the title, a small portion of the text, and a link.

Copy and pasting from 10 pages seems like a bit of a waist of time.

But honestly, thanks for sharing, it was an interesting read.

Funny, but it is standard practice in the Breaking News section to post the content with a link.

Most of the time, it is complete text content, so no need singling out this specific post, or the thread starter. A discussion of this sort would need to be with Neowin Staff who set the rules and accepted practices.

Actually, the standard practice is to post a snippet along with a link to the full article.

That's because most of the time the complete text is only a paragraph or two. An article of this length should not be copied. Actually there is no singling out here. It doesn't matter who posts it but an article of this length should not be copied in it's entirety. If you don't see the problem with doing that, then I'm sorry I can't help you.

As for Neowin Staff, it's up to them to do their jobs. All I can do is click the happy little 'report' button. Or maybe bring this to the attention of those who care... ;)

Actually, the standard practice is to post a snippet along with a link to the full article.
A check of the 10 next "Breaking News" threads, not counting this full cut/paste has the results of:

Full Text: 4

Partial Snip: 3

Spam for software: 1

Site Blocked for me at work: 1 (gee, a full text would be helpful in that case)

Youtube link (why is that news?) but also blocked: 1 (And that, apparently is in French, anyhow, judging by the comments posted)

Seems that there is no real "standard", except to allow both full and snippet type of Breaking News. ;)

That's because most of the time the complete text is only a paragraph or two. An article of this length should not be copied. Actually there is no singling out here. It doesn't matter who posts it but an article of this length should not be copied in it's entirety. If you don't see the problem with doing that, then I'm sorry I can't help you.
Agreed that the article was overly lengthy. However, some people read Neowin News at work during lunch and breaks. In cases where the destination site is blocked, a full-text is an advantage.
As for Neowin Staff, it's up to them to do their jobs. All I can do is click the happy little 'report' button. Or maybe bring this to the attention of those who care... ;)
Report away. You want the staff do to their jobs? Then stop whining about it in the threads and use the report and let them decide. :whistle:
A check of the 10 next "Breaking News" threads, not counting this full cut/paste has the results of:

Full Text: 4

Partial Snip: 3

Spam for software: 1

Site Blocked for me at work: 1 (gee, a full text would be helpful in that case)

Youtube link (why is that news?) but also blocked: 1 (And that, apparently is in French, anyhow, judging by the comments posted)

Seems that there is no real "standard", except to allow both full and snippet type of Breaking News. ;)

And does that make it okay? Certainly not. Just because you see it happening a lot does not make it acceptable, no, it's actually just indicative of careless staff. ;)

Agreed that the article was overly lengthy. However, some people read Neowin News at work during lunch and breaks. In cases where the destination site is blocked, a full-text is an advantage.

In that case, they can either: 1) Choose to abide by their employer's decisions and actually do what they're paid to do and wait till they get home to read the article or 2) Read the snippet and still participate in the discussion just fine

The bottom line is, full-text is a disadvantage to the people who work hard on putting these articles together to generate ad revenue for their site. Are you an advocate of piracy? This really isn't that far off it.

Report away. You want the staff do to their jobs? Then stop whining about it in the threads and use the report and let them decide. :whistle:

Haha, I'm sorry, but who's the one whining? :rolleyes:

---

Anyway, that's the last I'll discuss on this in this topic as it is offtopic. I'm sure you probably have a hard time realizing why this is an issue because either you don't really understand the implications or just don't care.

And does that make it okay? Certainly not. Just because you see it happening a lot does not make it acceptable, no, it's actually just indicative of careless staff. ;)
I said "standard practice", meaning it is common and accepted. You are now discussing if it is piracy and right. Nice bait-and-switch in a discussion. :p
Haha, I'm sorry, but who's the one whining? :rolleyes:
Who? You.
Umm... can we not copy and paste the full article here? :rolleyes:
It's not about how pretty it is or how convenient it is for you, it's about the ad-revenue you're taking away from the original source.
...

That's because most of the time the complete text is only a paragraph or two. An article of this length should not be copied. Actually there is no singling out here. It doesn't matter who posts it but an article of this length should not be copied in it's entirety. If you don't see the problem with doing that, then I'm sorry I can't help you.

...

hmm well the PC has little to do with gaming now anyway. developers are just going to use whatever API is used on consoles and then port to PC. so i would imagine developers will move to DX11 or 12 or whatever when the xbox 720 comes out. and thus if people want to play those newest games on PC they will have to have windows vista or later. by which time most people will.

hmm well the PC has little to do with gaming now anyway. developers are just going to use whatever API is used on consoles and then port to PC. so i would imagine developers will move to DX11 or 12 or whatever when the xbox 720 comes out. and thus if people want to play those newest games on PC they will have to have windows vista or later. by which time most people will.

The PC is still the largest gaming platform....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!