OpenGL 3 & DirectX 11: The War Is Over


Recommended Posts

(For images, please see the web site....)

Introduction

Given the prevalence of DirectX nowadays, we tend to forget that 10 years ago an all-out war was being waged between Microsoft and Silicon Graphics in the field of 3D APIs. The two companies were both trying to win over developers, with Microsoft using its financial muscle and SGI relying on its experience and its reputation in the field of real-time 3D. In this modern David-versus-Goliath battle, the “little guy” won a precious ally in one of the most famous game developers–-Mr. John Carmack. In part due to the success of the Quake engine, solid support for OpenGL opengl became important enough to motivate makers of 3D cards to provide complete drivers. In fact, it gave 3dfx one of its early advantages and knocked ATI to the back of the pack as it struggled with its OpenGL support.

Meanwhile, Microsoft was starting from scratch, and the learning curve was steep. So, for several years, Direct3D direct3d ’s capabilities were beyond the curve, with an interface that many programmers found a lot more confusing than OpenGL’s. But nobody can accuse Microsoft of being easily discouraged. With each new version of Direct3D, it gradually began to catch up with OpenGL. The engineers in Redmond worked very hard to bring performance up to its rival API’s level.

A turning point was reached with DirectX 8, released in 2001. For the first time, Microsoft’s API did more than just copy from SGI. It actually introduced innovations of its own like support for vertex and pixel shaders. SGI, whose main source of revenue was the sale of expensive 3D workstations, was in a bad position, having failed to foresee that the explosion of 3D cards for gamers would prompt ATI and Nvidia nvidia to move into the professional market with prices so low (due to economies of scale) that SGI couldn’t keep up. OpenGL’s development was also handicapped by bitter disputes among its proponents. Since the ARB—the group in charge of ratifying the API’s development—included many different, competing companies, it was hard to reach agreement on the features to be added to the API. Instead, each company promoted its own agenda. Conversely, Microsoft was working solely with ATI and Nvidia, using its weight to cast a deciding vote if there was disagreement.

With DirectX 9, Microsoft managed to strike a decisive victory, imposing its API on developers. Only John Carmack and those who insisted on portability remained faithful to OpenGL. But their ranks dwindled. And yet a reversal of fortunes was still possible. It had happened with Web browsers, after all. Even when a company has maneuvered itself into a near monopoly, if it rests on its laurels, it’s not all that rare for a competitor to rise from his ashes. So when the Khronos group took over OpenGL two years ago, many hopes were rekindled with all eyes on the upcoming SIGGRAPH conference that year.

Last month, Khronos was to have announced OpenGL 3, a major revision of the API that’s supposed to catch up with Microsoft, which was also scheduled to launch its next-gen DirectX 11 API. But things didn’t really go as planned.

<snipped - see source for rest of article>

Source: tom's hardware

Edited by PureLegend
Link to comment
https://www.neowin.net/forum/topic/670942-opengl-3-directx-11-the-war-is-over/
Share on other sites

Until Microsoft releases their method on other platforms (or at least opens it up so it can be freely implemented by others who want to port it), it is OpenGL for me.

which they wont ..... they rather customer keep buying windows for DirectX upgrades/update ... for short windows exclusive and will stay that way .

what we call it ? oh yes locking in customers

which they wont ..... they rather customer keep buying windows for DirectX upgrades/update ... for short windows exclusive and will stay that way .

what we call it ? oh yes locking in customers

I call it business.

It's a better read on Tom's Hardware. It's not just a wall of text, and there are pretty pictures to help visualise wtf they're talking about.

That is why I posted the following at the top of the story:

(For images, please see the web site....)

Of course, you completely failed to see that; typical!

It's not about how pretty it is or how convenient it is for you, it's about the ad-revenue you're taking away from the original source.

Funny, but it is standard practice in the Breaking News section to post the content with a link.

Most of the time, it is complete text content, so no need singling out this specific post, or the thread starter. A discussion of this sort would need to be with Neowin Staff who set the rules and accepted practices.

That is why I posted the following at the top of the story:

(For images, please see the web site....)

Of course, you completely failed to see that; typical!

I didn't fail to see it at all. Just making a statement.

I my opinion, you'd have been better off just posting the title, a small portion of the text, and a link.

Copy and pasting from 10 pages seems like a bit of a waist of time.

But honestly, thanks for sharing, it was an interesting read.

Funny, but it is standard practice in the Breaking News section to post the content with a link.

Most of the time, it is complete text content, so no need singling out this specific post, or the thread starter. A discussion of this sort would need to be with Neowin Staff who set the rules and accepted practices.

Actually, the standard practice is to post a snippet along with a link to the full article.

That's because most of the time the complete text is only a paragraph or two. An article of this length should not be copied. Actually there is no singling out here. It doesn't matter who posts it but an article of this length should not be copied in it's entirety. If you don't see the problem with doing that, then I'm sorry I can't help you.

As for Neowin Staff, it's up to them to do their jobs. All I can do is click the happy little 'report' button. Or maybe bring this to the attention of those who care... ;)

Actually, the standard practice is to post a snippet along with a link to the full article.
A check of the 10 next "Breaking News" threads, not counting this full cut/paste has the results of:

Full Text: 4

Partial Snip: 3

Spam for software: 1

Site Blocked for me at work: 1 (gee, a full text would be helpful in that case)

Youtube link (why is that news?) but also blocked: 1 (And that, apparently is in French, anyhow, judging by the comments posted)

Seems that there is no real "standard", except to allow both full and snippet type of Breaking News. ;)

That's because most of the time the complete text is only a paragraph or two. An article of this length should not be copied. Actually there is no singling out here. It doesn't matter who posts it but an article of this length should not be copied in it's entirety. If you don't see the problem with doing that, then I'm sorry I can't help you.
Agreed that the article was overly lengthy. However, some people read Neowin News at work during lunch and breaks. In cases where the destination site is blocked, a full-text is an advantage.
As for Neowin Staff, it's up to them to do their jobs. All I can do is click the happy little 'report' button. Or maybe bring this to the attention of those who care... ;)
Report away. You want the staff do to their jobs? Then stop whining about it in the threads and use the report and let them decide. :whistle:
A check of the 10 next "Breaking News" threads, not counting this full cut/paste has the results of:

Full Text: 4

Partial Snip: 3

Spam for software: 1

Site Blocked for me at work: 1 (gee, a full text would be helpful in that case)

Youtube link (why is that news?) but also blocked: 1 (And that, apparently is in French, anyhow, judging by the comments posted)

Seems that there is no real "standard", except to allow both full and snippet type of Breaking News. ;)

And does that make it okay? Certainly not. Just because you see it happening a lot does not make it acceptable, no, it's actually just indicative of careless staff. ;)

Agreed that the article was overly lengthy. However, some people read Neowin News at work during lunch and breaks. In cases where the destination site is blocked, a full-text is an advantage.

In that case, they can either: 1) Choose to abide by their employer's decisions and actually do what they're paid to do and wait till they get home to read the article or 2) Read the snippet and still participate in the discussion just fine

The bottom line is, full-text is a disadvantage to the people who work hard on putting these articles together to generate ad revenue for their site. Are you an advocate of piracy? This really isn't that far off it.

Report away. You want the staff do to their jobs? Then stop whining about it in the threads and use the report and let them decide. :whistle:

Haha, I'm sorry, but who's the one whining? :rolleyes:

---

Anyway, that's the last I'll discuss on this in this topic as it is offtopic. I'm sure you probably have a hard time realizing why this is an issue because either you don't really understand the implications or just don't care.

And does that make it okay? Certainly not. Just because you see it happening a lot does not make it acceptable, no, it's actually just indicative of careless staff. ;)
I said "standard practice", meaning it is common and accepted. You are now discussing if it is piracy and right. Nice bait-and-switch in a discussion. :p
Haha, I'm sorry, but who's the one whining? :rolleyes:
Who? You.
Umm... can we not copy and paste the full article here? :rolleyes:
It's not about how pretty it is or how convenient it is for you, it's about the ad-revenue you're taking away from the original source.
...

That's because most of the time the complete text is only a paragraph or two. An article of this length should not be copied. Actually there is no singling out here. It doesn't matter who posts it but an article of this length should not be copied in it's entirety. If you don't see the problem with doing that, then I'm sorry I can't help you.

...

hmm well the PC has little to do with gaming now anyway. developers are just going to use whatever API is used on consoles and then port to PC. so i would imagine developers will move to DX11 or 12 or whatever when the xbox 720 comes out. and thus if people want to play those newest games on PC they will have to have windows vista or later. by which time most people will.

hmm well the PC has little to do with gaming now anyway. developers are just going to use whatever API is used on consoles and then port to PC. so i would imagine developers will move to DX11 or 12 or whatever when the xbox 720 comes out. and thus if people want to play those newest games on PC they will have to have windows vista or later. by which time most people will.

The PC is still the largest gaming platform....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!