Win7 features revealed: customizable UAC and integrated Accelerators


Recommended Posts

They are continually optimizing NTFS, that's why it has version numbers

The guy is trying to parrot the usual criticisms of Windows Vista and Win 7 by saying things like there's no WinFS and you guys keep ruining it for him by pointing out facts! Stop it, just let him make up stuff to put down Windows for the love of god!

They are continually optimizing NTFS, that's why it has version numbers

also realize that :p

i guess they havnt hit a point were they look at it and something clicks were something clicks and they realize they could get a large performance boost that can get by recoding the majority of the File system . :)

i bet my 2 cents that those dialogs will still look like that in the final stages of win7
any reasons why they should'nt ?

Here's a few reasons: inconsistency, poor aesthetics and badly worded messages.

You guys do know these UAC "customization" options have been in Windows Vista from the very start huh?

Nearly every IT-pro / admin that uses Vista knew that.

However this is more of a consumer friendly UI. I think this is kinda a bad move as this will not turn off UAC but simply not show it anymore. This could lead to some very akward situations where older software won't raise UAC on it's own but there is no way of telling.

(* In case you didn't know: These options are found in the Group Policy and ultimately in the registry. You can set UAC raise requests for admins / non-admin. This way normal users get UAC (or not and they have to fill in an admin user/pass on the fly, BEST. OPTION. EVER.) but your enterprise admins won't have to worry about something nagging you when doing administrative work. This however does require your admins to have the dicipline to only use admin accounts when really really needed. Most don't.)

i guess they havnt hit a point were they look at it and something clicks were something clicks and they realize they could get a large performance boost that can get by recoding the majority of the File system . :)

I don't understand your reasoning here - you claim that recoding the file system => faster. I'm not exactly sure how that follows.

I think UAC's design choices are very lame, both in Vista and the supposed enhanced version. I actually have three suggestions to make UAC better. The first one is 'Remember my choice' option - Just like how using firewalls and similar security tools, you just need to authorize the program the FIRST time you run it, NOT every time!!

The second suggestion is that there should be some pre-defined allowed programs, also similar to those firewalls that automatically authorize well-known programs.

The third suggestion, which is a bit more tech savvy, is that the dialog should provide more information about what the program is trying to do. I mean, the message "a program needs your permission to continue" is really uninformative... Permission to do what exactly?! It needs not to be annoying as Host-based Intrusion Prevention Systems (HIPS - like COMODO Defense+, for example), but it should be more informative.

I understand that my third suggestion is a bit overboard for Microsoft, but I don't see any reason why my first two suggestions are not implemented. That way, UAC would be a lot less annoying (since less prompts), and a lot more useful (since less prompts mean that people are more likely to read the messages), and without compromising security the way the new UAC does!

The first one is 'Remember my choice' option - Just like how using firewalls and similar security tools, you just need to authorize the program the FIRST time you run it, NOT every time!!
So all virus makers had to do was fake a name? A hash? An icon?
The second suggestion is that there should be some pre-defined allowed programs, also similar to those firewalls that automatically authorize well-known programs.
See above.
The third suggestion, which is a bit more tech savvy, is that the dialog should provide more information about what the program is trying to do. I mean, the message "a program needs your permission to continue" is really uninformative... Permission to do what exactly?! It needs not to be annoying as Host-based Intrusion Prevention Systems (HIPS - like COMODO Defense+, for example), but it should be more informative.
Fixed in Win7. It now says what exactly it is that's happening (wants to install a program, etc).
So all virus makers had to do was fake a name? A hash? An icon?

No offense, but it seems that you have no knowledge about secure hashes. It is almost IMPOSSIBLE to duplicate a secure hash using a fake file, a virus or whatever!! Respectable security softwares use hashes and digital signatures, and that is indeed a secure setup. You make it sound simple!

And I am glad they made more informative prompts in Win7, thats good news.

Edited by zaidgs
also realize that :p

i guess they havnt hit a point were they look at it and something clicks were something clicks and they realize they could get a large performance boost that can get by recoding the majority of the File system . :)

If you want a performance boost, you should not be looking for them to reimplement WinFS. There's are reasons they abandoned it, and the massive overhead of the whole system was one of them.

I think UAC's design choices are very lame, both in Vista and the supposed enhanced version. I actually have three suggestions to make UAC better. The first one is 'Remember my choice' option - Just like how using firewalls and similar security tools, you just need to authorize the program the FIRST time you run it, NOT every time!!

The second suggestion is that there should be some pre-defined allowed programs, also similar to those firewalls that automatically authorize well-known programs.

The third suggestion, which is a bit more tech savvy, is that the dialog should provide more information about what the program is trying to do. I mean, the message "a program needs your permission to continue" is really uninformative... Permission to do what exactly?! It needs not to be annoying as Host-based Intrusion Prevention Systems (HIPS - like COMODO Defense+, for example), but it should be more informative.

I understand that my third suggestion is a bit overboard for Microsoft, but I don't see any reason why my first two suggestions are not implemented. That way, UAC would be a lot less annoying (since less prompts), and a lot more useful (since less prompts mean that people are more likely to read the messages), and without compromising security the way the new UAC does!

IFn the program was done right then it would only have the uac prompt come up once.

You are just like everybody else. BAshing microsoft for something that isnt their fault. Blame all the lazy coders who don't want to program their stuff the right way.

The new UAC should be made as an update for Vista...
yes, the new UAC will be part of Vista SP2, for sure!

Anyway I will keep the UAC to the max security level, so I don't really need this update.

Not going to happen, SPs are not meant to add features to an OS. If you want the new features, get Win7 when it comes out that is how it works. If MS just ported all the good stuff from Win7 to Vista, what is the incentive to buy Win7? MS are a business out to make money after all ;)

EDIT: UAC is actually perfectly fine how it is, I hardly see a UAC dialog box (primarily only comes up installing a new app or changing a system setting), all it really needed was a "don't show this dialog again for this app" check box.

Edited by Xerxes
"a program needs your permission to continue" is really uninformative... Permission to do what exactly?!

it's almost impossible to know what a program WILL do in the future. For example, a program starts to write in c:\program files so the UAC prompt appears, then this program will also change the firewall settings (the program is able to do that because it's already elevated). What message would be displayed to the user?

A message like "do you want authorize a write in c:\program files?" is wrong, because the programm also changes the firewall settings.

A message like "do you want authorize a write in c:\program files and a change in firewall settings?" is not possible because it's impossible to predict a future activity (i.e. changing the firewall settings)

Edited by franzon
Not going to happen, SPs are not meant to add features to an OS. If you want the new features, get Win7 when it comes out that is how it works. If MS just ported all the good stuff from Win7 to Vista, what is the incentive to buy Win7? MS are a business out to make money after all ;)

Microsoft is trying to make money? Nowai :o So yeah, thanks for pointing out the obvious. I know it's not going to happen, which is why I made it quite clear that I thought it's what should happen. If, as someone said above, this customisable UAC feature has always existed in Vista and only needed a GUI, then it should definitely just be released as a free update. While UAC is a good feature in concept, how it works is one of the biggest problems Vista, so changing it now would be far better for PR than making people pay for the upgrade to Seven for what boils down to a little slider.

it's almost impossible to know what a program WILL do in the future. For example, a program starts to write in c:\program files so the UAC prompt appears, once this program gets elevation it will also change the firewall settings. So, what message would be shown to the user?

A message like "do you want authorize a write in c:\program files?" is wrong, because the programm also changes the firewall settings.

A message like "do you want authorize a write in c:\program files and a change in firewall settings?" is not possible because it's impossible to predict a future activity (i.e. changing the firewall settings)

That is not how UAC works. UAC does not prompt you when a process goes to write in %programfiles%. If a process was launched with insufficient privileges to do so, when it tries to write there, it will simply get an access denied error.

Instead, UAC controls the privileges that the process gets at process launch. You are correct that after this point, it's impossible to know what the process is going to do, because it has simply been given Admin privileges, not permission to perform any one 'action'.

I love the idea of UAC customization.

...but I hate accelerators. I see no point to them, personally. I hope there's an option to disable them.

well based on the screenshot in the OP it would seem as though it has to be actively started and so is off by default

and MioTheGreat can you explain the whole notify thing in those UAC screenshots is about. what use could notifing users have when the process as already been elevated. i don't understand why those options exist surely just the top one and the bottom one are needed.

so....NTFS for another 10 years?

or is there a chance they've been working on a new File system that hasnt been announced yet?

WinFS wasn't a file system... look it up.

bloat... :no:

Try a laxative or anti-gas remedy...

IFn the program was done right then it would only have the uac prompt come up once.

You are just like everybody else. BAshing microsoft for something that isnt their fault. Blame all the lazy coders who don't want to program their stuff the right way.

City of Heroes is an excellent example of this. There is NO reason it needs admin privileges to download game patches.

Accelerators sound like a waste of time to me. The UAC changes look logical, particularly when many just disable the feature altogether currently. It's hardly surprising, as Microsoft admitted that UAC was designed in Vista to change the way developers worked instead of just taking the lazy option - unfortunately it was consumers that had to bear the brunt of it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      74
  • Tell a friend

    Love Neowin? Tell a friend!