Recommended Posts

Is that the Ikea Mikael desk? Do you have any more pics?

How is the TN panel in that 2409? I have a 22" Hannspree right now and I'm tired of always having to look dead on to avoid the color/contrast shift.

Sorry for the thread hijack.

Yes it is a Mikael desk, the corner version. Its pretty good with lots of room to store things. My only criticism would be the surface is very prone to easy scratching. Havent got any more pictures sorry, but there are some about on google http://images.google.co.uk/images?sourceid...q=mikael+corner

As for the TN panel thing my old dell 22" ultrasharp was a bit like that at times, but the 2409 is a major improvement with a fantastic image that looks great from all angles. Shame they put the price back up to ?250 now, it was a real bargain at ?199. Very very impressed with it.

I see that most people in this thread have their external hard drives standing up. So I've got a question here: Is it better to have it standing up or can I just lay it down flat on top of my PC case?

I see that most people in this thread have their external hard drives standing up. So I've got a question here: Is it better to have it standing up or can I just lay it down flat on top of my PC case?

Dosent really make any difference, they are designed to be used either way. The current fashion seems to be to have them stood up verticaly on your desk.

Just a small update, did the Step Up on my 9800GTX+ to a GTX260 Core 216, wanted to hold off but 1920x1200 is kind of pushing it with anything less and newer games....

post-127578-1225751770_thumb.jpg

And I still need to take some better shots of the whole set up, this picture doesn't do it justice. Plus the iPod Touch is gone and replaced with a Zune 16GB...

post-127578-1225751846_thumb.jpg

I think i saw that in the case picture of yours before, nice and clean. :)

How's the 590?

I have a 534 on my other system, and its great.

Thanks, it took a little effort, but it has decent space to hide cables. The 590 is great, very roomy awesome air flow. It's a little big but with the size of current video cards what can you do.

Just a small update, did the Step Up on my 9800GTX+ to a GTX260 Core 216, wanted to hold off but 1920x1200 is kind of pushing it with anything less and newer games....

post-127578-1225751770_thumb.jpg

And I still need to take some better shots of the whole set up, this picture doesn't do it justice. Plus the iPod Touch is gone and replaced with a Zune 16GB...

post-127578-1225751846_thumb.jpg

i keep looking at that pc and i keep getting the feeling something is missing lol... maybe just because mine is so cluttered with fans and lights :s lol

i keep looking at that pc and i keep getting the feeling something is missing lol... maybe just because mine is so cluttered with fans and lights :s lol

Nah, plenty of fans, 120mm Nexus in in the front, 120mm CoolerMaster in the rear and massive air flow. The q9300 idles at 38 and loads at 47 even when the room is warmish. So far the GTX260 seems to idle at 51 and load around 68. I'm not a PC silencing nut, but I do like it as quiet as possible, you might be surprised how little value some of your fans add.

Xigmatek S1283 is king! My Q6600 is 47C @ load, too!

edit: I have to admit, though, i was a bit iffy with Xigmatek, as I never used them before. But they are nice for a middle-priced heatsink.

Xigmatek S1283 is king! My Q6600 is 47C @ load, too!

edit: I have to admit, though, i was a bit iffy with Xigmatek, as I never used them before. But they are nice for a middle-priced heatsink.

Yea, same here, wanted more than an AC7 Pro but less than a TRU120, this fits the bill so well.

wish i could get my setup to hide cables like that. good work. i need to get a new case...

I had a Cent 5 a couple years ago. Got some snips and cut a small rectangular hole up near the PSU, you can fit quite a few cables behing the mobo tray. I'll see if I can find my pics, but I've always been bad about keeping shots of my old builds.

I have to agree that that case isn't great for hiding cables. The 8-pin power cord on my brothers wouldn't reach going behind the board and barely reaches going over the front (and it looks terrible). It wasn't a cheap PSU either, a 750W Zalman. Unfortunately, an 8-pin extension is absurdly priced.

Off-topic, I feel like the ATX form factor has many components in bad positions (nobody would have thought it would still be around at this time I bet), but its nearly impossible to change it now, so we make the best of it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Formatting would be awesome if fully customised and then roll out the settings as a company wide standard.
    • I just want to know why the volume control feature in the browser version keeps appearing then disappearing, here today - gone tomorrow. Now it's gone again. Annoying as hell.
    • When you have only lies and blood libels to present, you've lost. And how hard is it for you to look up BBC and AP? You hate Jews, just admit it.
    • This article does not make sense and it’s very evident, the bug wasn’t confirmed to exist, because the application itself runs on editions of Windows which make it impossible to run Hyper-V VMs on, “Basically, Claude Desktop on Windows spins up a 1.8GB Hyper-V virtual machine if you use Claude Cowork or agent mode even once.”, suggests the bug is caused by something else otherwise it would only happen to users with the capability of running Hyper-V VMs and that’s only if Hyper-V was enabled which is by default not enabled. The true issue is that the author who reported the bug used the incorrect terminology, it’s actually a container, not a VM that is being started by the way. There were users on macOS reporting the same issue, Hyper-V, doesn’t exist on that platform obviously. Every single user who confirmed the problem in the last week was either using macOS making this issue impossible to be relevant to them, or was a comment talking about WSL, which the author indicated 3 months ago was disabled.
    • “To prevent hallucination issues and keep the database clean, the platform uses a multi-agent verification loop to check code quality.” - This absolutely isn’t happening. ”Before the massive rise of LLMs, which tanked its traffic by about 50% over the last couple of years, Stack Overflow was the go-to website for millions of programmers seeking coding solutions.” - It still is trusted, because the community of users, blocked other users from submitting false and misleading answers generated by AI agents that can be convinced something it generated is actually incorrect even if it’s actually correct. The company itself doesn’t know what it wants to be so it keeps trying and failing to introduce AI features to the platform. This effort will also fail, already submitted one successful poison pill, look forward to generating more.
  • Recent Achievements

    • One Month Later
      Sopa flores earned a badge
      One Month Later
    • First Post
      StaticMatrix earned a badge
      First Post
    • Week One Done
      StaticMatrix earned a badge
      Week One Done
    • Rookie
      lamborghiniv10 went up a rank
      Rookie
    • One Month Later
      pinnclepd earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      524
    2. 2
      PsYcHoKiLLa
      211
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      98
    5. 5
      ATLien_0
      83
  • Tell a friend

    Love Neowin? Tell a friend!