Anyone upgrade to Ubuntu 8.10 yet?


Recommended Posts

Honestly, I didn't even know 8.10 was out lol. I had 8.04 installed in a multi-boot setup on my laptop, but just recently deleted that partition because I never used it. I may check it out though just to see what it's about.

I might have a look in a couple of months. Historically, Ubuntu usually has one or two problems still in need of resolving at its release. The only thing I've read about that really caught my eye was tabs in Nautilus, and a new theme that nobody can seem to agree on one way or the other.

To be honest, I'm more than happy with 8.04, and I don't feel the urge to upgrade. There's always backports anyway...

using a laptop, scared to right now, heard its destroying (physically) LAN, on some intel chipset, which i don't wanna risk, so...
The driver that caused these problems has been disabled in the Beta and will be fixed before the release.

Thanks, iv been so busy i totally forgot it was coming out! :)

Will probably install it tomorrow, just need to decide which to do, an upgrade or fresh install!

Edit:

Wait are you sure its out, just checked the Ubuntu site and it says coming soon! :unsure:

Yeah the site says release is 30th of Oct, so im guessing the OP is talking about the beta!

Ill be waiting a few weeks for the final release then :(

Edited by xirtamdbml
what do you mean destroying LAN ? i have an amd based laptop but i won't upgrade if this is the case.
There is a hardware problems with some Intel LAN chipsets that allowed the software to break them but the offending drivers have been disabled. The problem has actually not been worked around and will be included in the next Linux Kernel released on October 5th and subsequently, in the final version of Ubuntu 8.10.
Ubuntu is at 8.10 now?
The final hasn't been released yet, but yes.
what do you mean destroying LAN ? i have an amd based laptop but i won't upgrade if this is the case.

Some info here: http://blogs.computerworld.com/when_linux_...ernet_bug_fixed

Basically, the hardware allows its firmware to be overwritten. The problem has been worked around in code, and will make the next kernel release. Linus Torvalds chastised Intel on the LKML, so hopefully Intel will fix the problem in the future. In the mean time, the patch will look for this specific chipset and take care to jump around it. And Intel has committed to helping any user that bricks their LAN this way and supply them a replacement firmware loader.

well i have a nvidia based lan chipset in my laptop so i guess im safe. 8.10 looks to be interesting and seems to support more wireless from what i hear. i wish they could get syncing to work correctly though. i will install 8.10 in december, that way they have time to work the bugs and such out.

what other new features will 8.10 have in store for us ?

Ubuntu is at 8.10 now?

Its actually at 9.04 :p

Some info here: http://blogs.computerworld.com/when_linux_...ernet_bug_fixed

Basically, the hardware allows its firmware to be overwritten. The problem has been worked around in code, and will make the next kernel release. Linus Torvalds chastised Intel on the LKML, so hopefully Intel will fix the problem in the future. In the mean time, the patch will look for this specific chipset and take care to jump around it. And Intel has committed to helping any user that bricks their LAN this way and supply them a replacement firmware loader.

WOW....Thats scary. AFAIK, Windows has never had something like that happen; Or maybe it has and you will bring it up to my knowledge.

WOW....Thats scary. AFAIK, Windows has never had something like that happen; Or maybe it has and you will bring it up to my knowledge.

I don't know of any cases like this in Windows... But Windows has much of their testing and hardware certification in private. When a vendor has hardware that they want certified for Windows, they work with Microsoft on this, and any issues are dealt with.

This public Linux development is less structured in that there is no "Linux Hardware Certification" process. It is testing and some reverse-engineering and some cooperation with vendors (Intel is good at cooperating).

Honestly, I didn't even know 8.10 was out lol. I had 8.04 installed in a multi-boot setup on my laptop, but just recently deleted that partition because I never used it. I may check it out though just to see what it's about.

I knew it was out but honestly I am in the same boat. I have 8.04 installed on my dual boot laptop, and never used it. It was cool for all of 3 days, then I got bored with it so boot to Windows all the time.

The only time I use my laptop is for work stuff, and then my work stuff either REQUIRES me to use IE or Office, and I just don't find myself wanting to use a program like openoffice or anything.

My home pc I definately wouldn't use linux considering 99% of my time on it is used for Gaming.

To early to use in a production machine. Just run the LiveCD...

The only time I use my laptop is for work stuff, and then my work stuff either REQUIRES me to use IE or Office, and I just don't find myself wanting to use a program like openoffice or anything.

What exactly stops you from using IE or Office under Linux? (Why do you need IE, in the first place?)

Some info here: http://blogs.computerworld.com/when_linux_...ernet_bug_fixed

Basically, the hardware allows its firmware to be overwritten. The problem has been worked around in code, and will make the next kernel release. Linus Torvalds chastised Intel on the LKML, so hopefully Intel will fix the problem in the future. In the mean time, the patch will look for this specific chipset and take care to jump around it. And Intel has committed to helping any user that bricks their LAN this way and supply them a replacement firmware loader.

Kudos to Intel on that one (Y), I'm not sure many other companies would even bother doing that (it's still bad that it happens but at least Intel are been good sports about it).

So what is new with 8.10? I used 8.04 for a while and was quite pleased with it, but deleted it cause I didn't use it. I might try it out using Wubi once it hits final but I'd like to find out what has changed/removed/added?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!