[Official] Banjo-Kazooie: Nuts & Bolts


Recommended Posts

I was a bit dubious about this game, turning Banjo-Kazooie into a game about vehicles? Well, I've actually been playing a few hours now and it's pretty good. Can't say I wouldn't prefer classic platforming style of old, but it's not a bad game because of it. It's different, but I suppose that's good. I love all the references to the old games.

I have to say though, the graphics and art style are amazing! Seriously impressed by the quality. The one thing I always love about Rare is you can see and feel just how much effort was put into making it. This game is gonna take many hours of my time now :p

I was a bit dubious about this game, turning Banjo-Kazooie into a game about vehicles? Well, I've actually been playing a few hours now and it's pretty good. Can't say I wouldn't prefer classic platforming style of old, but it's not a bad game because of it. It's different, but I suppose that's good. I love all the references to the old games.

I have to say though, the graphics and art style are amazing! Seriously impressed by the quality. The one thing I always love about Rare is you can see and feel just how much effort was put into making it. This game is gonna take many hours of my time now :p

QFT :yes:

I'll reserve my full opinion until I've finished it though :p I still hope the next Banjo (is there one planned? hope so!) will go back to it's roots.

Will get Banjo-Kazooie for XBLA in the meantime. I'm surprised it was even allowed to be released on XBLA, don't Nintendo hold some of the rights to it?

There hasn't been any rumours of Banjo 3 to my knowledge, but they have talked about making another Killer Instrinct just the past few days! Another beloved franchise of Rare's.

I'm not sure how Rare got around the IP with Nintendo for XBLA, but I'm happy they did. Banjo 2 is coming to XBLA as well. I hope they can do something in the future with Goldeneye as well, but that's a whole different situation compared to BK.

I'm liking this more as I play it, it's pretty solid, but it's still a spin off in my eyes!

Would kill for a Banjo 3 on this engine, with development time improvements.

Need more HD 3D platformers this generation, not had many to go on :(

I think that is what is holding me back from getting the game. I really love playing it but with all the AAA titles out this fall, I'm so backed up its not funny.

I know what you mean. I actually probably won't get to play it again until the weekend or later, not even because of other games. I have a research paper to write, and then course reading material to catch up on as exams start late next week. I just happened to wake up about an hour earlier than I usually do today so I figured I might as well give it a go.

-Spenser

Need more HD 3D platformers this generation, not had many to go on :(

Yeah I never got the fact they said if they did a straight platformer they would end up just remaking the older games. Theres so much that can be done in the genre and it's one thats had far too few titles, especially quality ones.

  • 3 weeks later...
Banjo patched with SDTV text option

by Tom Bramwell

Rare has reportedly patched Banjo-Kazooie: Nuts & Bolts so that dialogue boxes and prompts are easier to read on standard-definition TVs.

The latest auto-downloading title update turns on large text by default, according to forumites, and introduces a toggle to the brightness and contrast options menu.

When it launched in late October, Banjo was criticised for its tiny on-screen text, which was difficult to make out on smaller SDTVs, impossible to adjust, and important to making progress.

It's the same problem that affected Capcom's Dead Rising in 2006, although to Rare's credit the developer responded to concerns with an update, whereas Capcom didn't.

Sadly we don't have a copy of Banjo in the office, but images on numerous blogs and widespread reports from users confirm its existence.

For more on the game, which transplants Rare's lovable bear and bird character combo into a build-your-own-racer, check out our Banjo-Kazooie: Nuts & Bolts review.

Source: Eurogamer

Got this for Xmas and so far I'm so disappointed in this game. Shouldn't have expected anything different I guess after reviews but this game simply is not fun in any way shape or form from what I've played so far. And it could have been but Rare seem to have ignored all the hands on previews that were given that said the game controlled like a dog and have released it anyway. The vehicles bounce around like no tomorrow and generally don't do what you want them to. Add to that some other stupid things like having to constantly get out of the vehicle to pull a switch or something and you have a game thats just more tedious than it is enjoyable.

It's a shame IMHO. Not only to see Rare continue releasing games that come close but miss the mark constantly but also that they have continued to release average titles for a number of years now while a company like Ensemble gets disbanded by MS. To think they used to be my favorite game company back in the 90's.

The other issue besides the controls is that the game doesn't even address one of the issues Rare seems to have with platformers in that the games are collectathons. Not that I even agree that that was a problem, but this game is far worse than the older Banjo's or Mario series have ever been since your not only still collecting jiggies and notes but your also collecting engine parts to help your vehicles performance. Hell theres even collectables to unlock by playing the original on XBLA.

I'm a bit lost as to how this game became such a mess to be honest.

As others have mentioned, hopefully they use the engine to make a traditional game because the engine seems very capable to me and all this one really needed was another month or two of testing and tweaking the physics.

Yeah well theres an ok game there, it just doesn't feel right at all IMHO. I'm going to try sticking with it and seeing if after getting more parts the vehicles begin to handle a bit better.

But the disappointing thing is IMHO this has been the trend with Rare in recent years, where they get close to a really good game and then release something that has a few game play elements that let the rest of it down. If the vehicles handled better IMHO it'd be a high 80's maybe even low 90's game. Well I personally think it would be anyway.

Edited by Smigit
I got the game for Xmas too, and I eagerly await New Year's when I'll finally be with the other half of my Xbox's power cable and can actually play it...

man that must suck. haha

Rare didn't want to make another platformer like you & others described though. They wanted to do something new with the BK universe.
Ohh I have no problem with it being different. As above my complaint is that so far, maybe verging 20 jigsaw pieces in, all the vehicles for me feel pretty awful to drive and given thats the core gameplay mechanic then it hampers the entire game for me. I really don't mind the idea, just the implementation.

I'll stick with it for another 20 or 30 missions and maybe I'll start getting some parts to allow me to make something that handles more to my liking.

On the plus but, I shot through the original that came free with it in 2 days. Was so good to replay that even if I remembered where 99% of things were after 10 years.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!