My RROD fix


Recommended Posts

Through metal casing and mobo: 8 X 5x12mm Machine Screw

Under the mobo: 4 x metal washers (B&Q M5 -3/16") + 1 cardboard washer (cigarette box) per corner

Top of mobo: 3 x metal washers (B&Q M5 -3/16") + 1 cardboard washer (cigarette box) per corner

Top of CPU/GPU: 6 X Credit Card pieces

Few blobs of Arctic Silver 5

Perform balancing act while tightening slowly and systematically, just a few turns per corner, down to 1/4 of a turn per corner. But very tight.

Pray

Cost: ?00.00:shifty::

post-18738-1233687986.jpg post-18738-1233688010.jpg

post-18738-1233688026.jpg post-18738-1233688038.jpg

post-18738-1233688061.jpg post-18738-1233688189.jpg

Yeah I know, It's kinda stiff to get it going, then... splurge. :blush:

Should be OK though, I tightened it pretty damn tight, so it will have all squeezed out the sides. Makes for a messy clean up job if I ever have to get back in there again though. Hope that doesn't act as an insulator now!

This is my last attempt at a fix, before I start the "DARKFiB3R Xbox360 Fund". (I can see that going well :p )

I've taken the DVD drive out of the 360 and put it in my un-used HD-DVD drive enclosure. This was not as straight forward as I thought it would be, and involved a hack saw lol. And I had to extend the DVD drive power cable, that was a right pain in the arse, but came out quite well I think.

The point of that was to reduce heat in the 360 and to allow me to fit an 18cm (I think) fan to the console. I've also cut out the rear grill to try and maximise the exhaust airflow. Added another little fan in there too, for what it's worth.

The eject button for the DVD drive is actually on the console, and not on the drive like standard PC drives. Thankfully, a cable tie was all that was needed to hold the button to the case. Looks dodgy, but there is no real force against it, so it's not going anywhere :)

It is kinda strange though, pressing the button on the 360, and having the (ex) HD-DVD drive open, but I think I can live with it.

Also, the 360 and the HD-DVD drive are now inseparable, without resorting to screwdrivers.

post-18738-1234308849.jpg post-18738-1234308864.jpg

post-18738-1234308873.jpg post-18738-1234308881.jpg

post-18738-1234308895.jpg post-18738-1234308910.jpg

post-18738-1234308930.jpg post-18738-1234308946.jpg

post-18738-1234308957.jpg post-18738-1234308965.jpg

post-18738-1234308974.jpg post-18738-1234308983.jpg

post-18738-1234308997.jpg post-18738-1234309007.jpg

post-18738-1234309017.jpg post-18738-1234309027.jpg

post-18738-1234309035.jpg post-18738-1234309052.jpg

post-18738-1234309059.jpg post-18738-1234309069.jpg

Sorry dude, but that white faceplate on a black 360 looks like absolute ass!

(nothing to do with it being England :p)

And man, you've put far too much effort into this - Nice work, but seriously the console is going to keep dieing dude, just buy a cheap Jasper arcade :p (at least then your faceplate will match!)

LOL I know, I know, the faceplate looks pants. It was a gift (honest) and didn't look too bad when my 360 was still white. My mate sprayed the 360 for me, but he made a right mess of the face plate. You can barely see the ring of light through it, I doubt the IR receiver works and the flaps are kinda sticky :p

I'm kinda confident that I've cracked it this time, but we'll see. The next step would be to water cool it, but at that point I'd just get a jasper.

Money is tight right now though, I've got a holiday coming up, I want KZ2 and I want to buy the parts to build my Joystick for SFIV.

I had those fans laying around so it hasn't cost much doing all this, and I kinda enjoy it (though I'd rather it just bloody worked lol ).

So... the battle continues.

I appreciate the going off of your hate to me lol. Thank you :)

The next pics I post will (hopefully) be of the HD-DVD enclosures paint job and some lighting.

I might try and do some sort of paint effect on the face plate, then match that on the dark grey part of the HD-DVD enclosure. Not sure, any ideas?

Just bought a Arcade (Jasper) + Banjo banjo kazooie N&B for ?129.99 from Game Satation:((:))

I can just plug my HDD straight into it right?>

Yes you can.

Plus that better not have ate into your KZ2 budget:pp

Yes you can.

Plus that better not have ate into your KZ2 budget :p

I'm afraid it has, and my Joystick budget :'(

Should have gotten a Playstation 3... :p

Should have checked my sig ;)

I plugged mine straight in, proceeded to manually upgrade to 120gb too the other day :p

Definitely want to do that, just don't know when.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Umm, read my answer again! If you have something to add or contribute, feel free. Otherwise my point was that you apparently dont want faster updates... so you want slower updates by process of elimination. If you have something to contribute, meaningful answers are better.
    • These features described above are good, but far from what developers will like the most. The main feature that developers will care and love the most it's called "Bring Your Own Models". It gives us the ability to connect to LOCAL AI models running on Ollama. The feature it's located on GitHub Copilot tab -> On the model picker where you can select "manage models" instead of paid models and then it will show you the "Bring your own models" window where you can now select Ollama and the endpoint of your local server. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      81
  • Tell a friend

    Love Neowin? Tell a friend!