Welcome to Neowin 5


Recommended Posts

Well, I don't see the big deal ... like mentioned, how much time do people REALLY HONESTLY spend on the front page?

I used to do 80% of the article reading from the page, only opening the article if I wanted to read more AND it didn't fit on the front page. I'd say that was several minutes reading per a day assuming they had fresh content.

Besides, the point was to get people interested in that content so talking about how ppl would skip to the forums anyway isn't the point. They're supposed to be enticing us to use the front page.

Well, I don't see the big deal ... like mentioned, how much time do people REALLY HONESTLY spend on the front page?

I would spend most of my NeoWin time on the front page. I checked it every day. I took a look at it this morning and it just turned me off completely that the news stories are truncated.

PLEASE CHANGE THINGS before I decide to go elsewhere! :no:

Guys how the hell are we ever supposed to maintain Neowin without ads for crying out loud.

This site isn't free to run you know, gawd.. think about everything else we give back for the "intrusion" of 3 ads per page!

Neobond totally has a point. Unless everyone is sending in a portion of their paychecks each month to Neowin then we will need ads.

How in the world do you think a site like this stays up? We don't charge every member for membership, so we need them and it's pointless and works against us to block them.

Just on a personal note I do appreciate all the feedback that's given but I appreciate it more when it's not suffixed with 'do this or I'll leave the site'. Demands are hugely unhelpful when compared to the majority who are being constructive in their opinions.

Neobond totally has a point. Unless everyone is sending in a portion of their paychecks each month to Neowin then we will need ads.

How in the world do you think a site like this stays up? We don't charge every member for membership, so we need them and it's pointless and works against us to block them.

Yes indeed. I cannot imagine the cost of maintaining a site this large. Subscriptions help but not enough.

By all means have the ads!

Neowin should be able to at least break even. What everyone here disagrees here is with having the ad in the middle of the page!!!

I wouldn't be against 5 ads instead of the three we have now, so long as they are all unobtrusive.

If you look at the AdBlockers thread you'll find that the ads we had on Shift were also unacceptable to the majority, ok.. some, while Neowin has the fewest ads of any of our competitors and size.

Coupled with the credit crunch, I can tell you that we get at least 25% less than we did a year ago and that means we're borrowing, not even breaking even.

Remember that we just bought a new server FOR YOU GUYS and we actually have to pay for this Finity update (which isn't free)

Guys how the hell are we ever supposed to maintain Neowin without ads for crying out loud.

This site isn't free to run you know, gawd.. think about everything else we give back for the "intrusion" of 3 ads per page!

If you look at the AdBlockers thread you'll find that the ads we had on Shift were also unacceptable to the majority, ok.. some, while Neowin has the fewest ads of any of our competitors and size.

Coupled with the credit crunch, I can tell you that we get at least 25% less than we did a year ago and that means we're borrowing, not even breaking even.

Remember that we just bought a new server FOR YOU GUYS and we actually have to pay for this Finity update (which isn't free)

I agree that the ads in shift where not a problem and even stood up for Neowin on that case, becuase i never found them intusive. However, this latest move has caused the front page to look tacky and also makes me want to turn away from using the front page, because that ad is slap bang in the middle of my reading area.

I also understand that you need ad revenue to keep the site running etc, however, you have survived this long with the ads where they where... so i question, are you just looking to try and boost your revenue, by providing more ads in the line of site for people reading, especially as they might accidently click on them, when they didnt want to!

Guys how the hell are we ever supposed to maintain Neowin without ads for crying out loud.

This site isn't free to run you know, gawd.. think about everything else we give back for the "intrusion" of 3 ads per page!

I think they are ok, I don't really see them as much of a problem to be honest.

Guys, guys, why all the fuss?

I just found out I can get a Wii and great savings on my car insurance. See, ads aren't that bad.

In all seriousness though, we may not like the ads, but without them this site will surely die. It's a small price to pay for all that we get here, think about it.

Just on a personal note I do appreciate all the feedback that's given but I appreciate it more when it's not suffixed with 'do this or I'll leave the site'. Demands are hugely unhelpful when compared to the majority who are being constructive in their opinions.

Nobody seems to answer one little gripe I have.

Whay is Apple listed above Microsoft and Linux in the news menu? Its not alphabetical...so there must be a reason?

Just niggling at me is all...

Nobody seems to answer one little gripe I have.

Whay is Apple listed above Microsoft and Linux in the news menu? Its not alphabetical...so there must be a reason?

Just niggling at me is all...

There probably is no reason other than they were typed out in no particular order and then no one sought to re-order them. It's a low-priority fix I'm sure we'll get to.

Lame. :cry:

Heh, honestly, it seems like this would be the main reason to subscribe lol.

No. The main reason to subscribe would be to help support Neowin & help keep the website going.

I despise ads as much as the next person, but no way will having ads stop me from being a subscriber or stop me from using Neowin.

The amount of news & computer help we get here is worth far more than the little amount of ads on the site; no matter where they are placed.

I hate the square ad in the middle, but it is there for a reason.

Also, some are forgetting, Neobond has proposed the idea of maybe having an ad-free option for subscribers, costing a bit more money. That idea is not finalised yet & may not happen, but it's nice to know there is thought of it.

Normally I don't care about the ads on Neowin because they were subtle, and I always had them white listed. This new ad in the middle though, I can't take it. It's way too huge, and in the middle of everything. It's distracting and irritating. I want Neowin to do well, that's why I gave them my money (I don't even use any of the subscription features). But that one ad is just so bad that I have no choice but to turn the blocker on.

I despise ads as much as the next person, but no way will having ads stop me from being a subscriber or stop me from using Neowin.

+1, and even WITH that relatively large had smack-dab right in the middle of my screen; it's still not as intrusive as some of the ads I've seen on other websites.

I like the improved width

A quick question about intellitxt... Apparently that's no longer used, but why is noscript showing that as something it's blocking on the mainpage? I've temporarily enabled it to see where it is and found nothing :s

Also, what's up the "Get Impulse Today" and "Macs? On Neowin?" banners splitting the first and seconds news articles... Looks like a mistake as opposed to a design choice... Also, just clicked on that impulse banner, nice advert on the impulse page... Wouldn't that be borderline NSFW ad?

I like the improved width

A quick question about intellitxt... Apparently that's no longer used, but why is noscript showing that as something it's blocking on the mainpage? I've temporarily enabled it to see where it is and found nothing :s

Also, what's up the "Get Impulse Today" and "Macs? On Neowin?" banners splitting the first and seconds news articles... Looks like a mistake as opposed to a design choice... Also, just clicked on that impulse banner, nice advert on the impulse page... Wouldn't that be borderline NSFW ad?

Not sure if you've noticed, but I've listed Apple first in the main drop down menu... That'll show em ;)

If you look at the AdBlockers thread you'll find that the ads we had on Shift were also unacceptable to the majority, ok.. some, while Neowin has the fewest ads of any of our competitors and size.

Coupled with the credit crunch, I can tell you that we get at least 25% less than we did a year ago and that means we're borrowing, not even breaking even.

Remember that we just bought a new server FOR YOU GUYS and we actually have to pay for this Finity update (which isn't free)

I'm not complaining about the number of ads, but more so the placement. If they were a little less in the way, I would gladly turn off my adblockers and scripts to support neowin. You see my only problem is, if I do, then I get 50% of my page taken away for some "BUY THIS" ad. Very distracting.

Ambiance's picture 3 or so pages ago is exactly what I, and many others are talking about, and how to fix it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!