Hot Topics and Pinned Topics


Recommended Posts

Whilst I agree that having the pinned topics stand out does make the forum more organised and much clearer to tell the pinned topics from the normal threads, it didn't work efficiently on Neowin. Obviously. I mean, take Grand Maester for example, most (if not all) of the questions in his many topics in this forum can be found in the FAQs and other pinned threads in Neowin forums, however, this user obviously didn't read these pinned threads before he asked some of his first questions.

It is because of issues like this why Neowin have decided to take out one of the indicators which was there, but still leave in the needed and obvious indicators - an icon of a pin and paper and the text "Pinned:".

To me, it's very obvious which topics are pinned, straight away and whilst it doesn't look as neat as it does with the separators, you can't really blame Neowin for this move can you?

Joel is just doing his job and trying to inform you all of this. You can still easily tell which threads are pinned and which are not, but this move means it will save everyone on Neowin (especially the staff) a lot of time as it will decrease some of the unneeded threads which tend to appear.

This is because even with the indicators its still not easy to determine which is which. The way it was before was much better.
Maybe instead of adding headers then is it possible to make the "Pinned" text bolded? Or maybe in a bigger size or even all in capitalized letters; anything to make it stand out just a bit more.

Funny thing is, when I look at that vBulletin example, it's perfectly fine; but when I come back to Neowin, the transition doesn't seem to be as clear.

I'm in agreement here. The new way is much harder to see and, although not unusable, is somewhat counter-intuitive. Not sure why a simple thing like this can't be addressed? ;)

The whole point of pinned topics is to get people to read them. If they aren't important then they shouldn't be pinned.

This was a conscious change because far too many people were skipping over the pinned topics and beginning to read the list of non-pinned topics. If you prefer the old way then you can still use an old skin but this will be the change going forward.

The whole point of pinned topics is to get people to read them. If they aren't important then they shouldn't be pinned.

This was a conscious change because far too many people were skipping over the pinned topics and beginning to read the list of non-pinned topics. If you prefer the old way then you can still use an old skin but this will be the change going forward.

Really all I wanted was an explanation as to why it was removed, rather than a straight up "No it's not coming back, why do you need more anyway?"

Really all I wanted was an explanation as to why it was removed, rather than a straight up "No it's not coming back, why do you need more anyway?"

Well, that's the reason then. When they were off on their own little island then people were ignoring them.

It WAS addressed, because it was obviously done on purpose. ;)

You know, this is the board that cries over every lost pixel; you'd think people would be thrilled that we removed 2 headers.

Then our definition of "addressed" seem to be varying here. :p

The header removal is fine, but something like a more prominent and/or more obvious "Sticky" indication is really all that's needed to create a visual distinction.

Then our definition of "addressed" seem to be varying here. :p

The header removal is fine, but something like a more prominent and/or more obvious "Sticky" indication is really all that's needed to create a visual distinction.

You see though, the problem here is that you want more visual distinction so that you can skip over them. We don't want people to skip over them because we consider them to be important.

You see though, the problem here is that you want more visual distinction so that you can skip over them. We don't want people to skip over them because we consider them to be important.

They are important, but frequent visitors know what's in them and know when to go to them. Although I see your argument for new members the fact of the matter is this site strives on those who frequent.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!