Recommended Posts

Hi

At home my wireless network doesn't quite seem up to scratch - both my main box and my laptop work well independently of one another, but file transfer between the two and streaming is painfully slow: I would expect at least 1mb/s, but it's no more than 100kb/s. My internet connection is ten times that for ****'s sake!

Any ideas?

Thanks in advance

Link to comment
https://www.neowin.net/forum/topic/699080-incredibly-slow-file-transfer/
Share on other sites

You might need to do some RWIN tweaking.

can you extrapolate?

you checked stuff like pings and firewalls? Try turning off the firewall completely and see if that changes anything.

That sounds possible actually -

I'm having some problems with Comodo on my main computer - for example: If I connect to my wireless network with it fully enabled, it will connect to the Local Network, but not get as far as Local & Internet (I don't like the way the Vista UI approaches networking at the best of times, but that's irrelevant).

I have to disable the firewall, allow it to connect to the Internet, and then re-enable. This would indicate that there is something wrong with its settings anyway.

I am considering using Kaspersky. So, in the interim I can check whether the firewall is preventing things I suppose.

Any thoughts on the above?

Thanks so far. :)

You might want to consider why you even think you need a software firewall.. Your behind a NAT router -- is the other macchine your trying copy files to hostile?

Are there other machines on the wireless network that you should treat as hostile? If not --- what exactly do you feel your firewall is providing you? Do you control software outbound access? Your nat router will not let any inbound traffic talk to your machine unless it has been requested by your machine -- so what exactly is the software firewall doing other than causing you grief?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Of course the problem was Secure Boot's new certificates. Install media created by the official Media Creation Tool is already signed with a valid certificate from Microsoft, so maybe that certificate isn't "up-to-date" enough for machines with the new ones installed in the UEFI. There's really no other logical explanation.
    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!