Recommended Posts

I really liked emmzaa's theme posted here on Neowin a few months ago.

Things have been hectic around the house (with me in the middle of a career change at the moment), but I have finally gotten around to getting a functional theme going.

Here is a screenie (remember fluxbox is just a basic Window Manager, and has nothing to do with gtk or anything going on inside the windows, such as scrollbars, menus or the standard gray coloring).

omniosbluezt6.th.png

post-36818-1228313585_thumb.png

A lot of the finer detailed pixmaps for the menus in the original could not be included due to the simplicity of flux styles, but this still has appeal to me.

The attached files are the style file (remove the .txt extension required for Neowin upload) that you place in your ~/.fluxbox/styles/ directory. It points to the content in the tarball (again, remove the .zip extension required for Neowin upload) that must be untarred into your ~/.fluxbox/pixmaps/ directory.

OmniOS.tar.gz.zip

OmniOS_LiteBlue.txt

Link to comment
https://www.neowin.net/forum/topic/705638-omnios-blue-for-fluxbox/
Share on other sites

On a side note: is there a reason for you to use the default grayish GTK theme? Firefox looks so... gray. :p

The truth?

Because I have never cared to look into changing it. :p

And my selection of preferred apps were made without regard to libraries, so I have lesstif (nedit), GTK, and QT apps all in-use, and would have to change them all. Not sure how much lesstif work can be done. Nor am I sure what OO.o uses :unsure:

For all my years of using Linux, I have never been much into the theming thing. :blush:

The credit for the good-looking buttons goes to emmzaa. The blame for all that is unholy and wrong goes to me (and the limitations of flux)

The truth?

Because I have never cared to look into changing it. :p

And my selection of preferred apps were made without regard to libraries, so I have lesstif (nedit), GTK, and QT apps all in-use, and would have to change them all. Not sure how much lesstif work can be done. Nor am I sure what OO.o uses :unsure:

For the gtk's (version 1 and 2) I use (outside KDE) the tool "gtk-theme-switch" and "gtk-theme-switch2".

To change the QT ones I use kcontrol (from KDE).

Motif/Lesstif well... Those aren't even worth theming...

The widgets in Openoffice.org look to be GTK, but not sure about that. If it is GTK it's a tweaked version of it.

It's all a big mess it's what it is... There will be great joy on the day that someone remembers to make a tool which will handle the theme switching of all the different applications, no matter what basis those have. And it's not even that complicated to make such an application. Only takes an application that can parse a few configuration files...

The ideal would be to make all the different toolkits fully compatible with each other. Not just in the looks but in the actual API. There seems to be interest in doing that, between GNOME and KDE. D-Bus for instance is a great step forward in that direction, just hope that a lot more will be done in this area.

Very nice :)

Which icon theme do you using?

Thanks, but the credit goes to emmzaa for the window decorations. Mostly, I just made her bitmaps work with fluxbox's requirements, and used her colors to match in the grip and menu areas.

As for icons, just Xubuntu default.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The entire world moved to the vastly superior and now universally supported Dolby Atmos technology a very long time ago, mate.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      543
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!