Opera 10.0 Alpha 1


Recommended Posts

i think its quite cool compared to Safari and FF.... now FF will gonna have tough competition... Lets hope the final release will rock the internet world :D

points to note:

- This release includes FF like trim_on_minimize functionality..which lowers the memory usage on minimizing.

- Compared to FF,it takes less memory if you have more tabs.And if its high then it reclaims it when u minimize/maximize it...so its better i think :)

regards.

I have used it on two computers, both Windows XP SP3, for a few hours and I haven't experienced any crashes, bugs, or rendering errors (yet).

As a side-note: the Tango CL skin does not look right. The tabs are roughly 3 pixels too tall, causing a silver bar to run along the bottom of the set of tabs. This is the only visual glitch I've noticed. It's not that bad.

(Update) I restarted my computer, and the Tango CL problem went away. I thought it was a skin-switching bug, but I just switched between many different skins and couldn't reproduce it. Odd. I'm happy that the skin looks normal now, though :)

I wish they would make it easier to move the tab bar to below the address bar.

Go to Tools > Appearance, switch to Toolbars tab, check the box next to "Main Bar", drag the address field and wanted buttons to the newly revealed toolbar, then uncheck the box next to "Address Bar". Voil?!

(A screenshot I took of my customized install of Opera 9.5, I think it was, that shows the tabs below the address bar.)

download.php?file=post-51860-1204841552.gif&name=Untitled_1.gif

I just found a bug. Flipback does not work when mouse gestures are turned off. A bug report has already been filed for it. If you use this feature, you'll need to turn on mouse gestures until this bug is fixed.

(Flipback is a quick way to go backward or forward in history. If you hold the right mouse button and click the left, you go backward. If you hold the left and click the right, you go forward.)

I just found a bug. Flipback does not work when mouse gestures are turned off. A bug report has already been filed for it. If you use this feature, you'll need to turn on mouse gestures until this bug is fixed.

(Flipback is a quick way to go backward or forward in history. If you hold the right mouse button and click the left, you go backward. If you hold the left and click the right, you go forward.)

I'm not sure if it's a bug or a fix. I'm always annoyed that Opera 9.5 does some of the mouse gestures (Flipback) even when I chose to turn off mouse gestures. I think they should be part of mouse gestures anyway, not separated into Flipback and mouse gestures.

Nice and solid here. In fact my only complaint is that the smooth scrolling is a little bit jerky...well, not jerky, just not quite as smooth. But it's an alpha after all, and bloody nice!

It's the scroll marker that does it. For scrolling to be smooth. Disable "Enable Scroll Marker" (set it to 0) in opera:config.

Wow, the Mac version is awesome!. ?Opera has been my favorite Windows browser for more than 5 years and I was using Safari on my Mac because 9.* was bad on a Mac imo. ?Even the alpha is very stable.

However, I'd like to see the little button located upper right to hide all toolbar (Like Firefox and many Apple apps have)

Speed-wise I'm satisfied with Opera in its current state, what we need is a GUI not too cheesy. In its present state, Opera is even uglier than Firefox. Sure, it's easy to get new skins, but they all suck more or less. When I saw Chrome for the first time, I thought "now these guys can design a GUI". I hope Opera Software can do something similar.

And of course there's no way I'm using version 10 until it's done.

Speed-wise I'm satisfied with Opera in its current state, what we need is a GUI not too cheesy. In its present state, Opera is even uglier than Firefox. Sure, it's easy to get new skins, but they all suck more or less. When I saw Chrome for the first time, I thought "now these guys can design a GUI". I hope Opera Software can do something similar.

And of course there's no way I'm using version 10 until it's done.

Well, Opera 10 is suppose to be the version where they promised to do a major overhaul of the user interface, so hopefully they don't decide to delay that. They have John Hicks on board, so that will certainly help.

I hope they're still planning on implementing a better GUI in later builds. I remember an article about how Opera 10 was supposed to have a GUI update, I think...

well, remember 9.5 didn't have its GUI changed until a couple weeks better its release. I'm sure Opera 10 will get its new GUI, just not sure whether it will be for better or worse :p

I guess most users here at neowin don't know jack **** about the software development life cycle. The UI is usually developed during the last few stages.

+1

timeline.png

Thats Opera 10's timeline, new features should be around (starting) early next year......that would include a new UI (after the features are done that is).

The thing about the UI, is it can only be redesigned once your positive on what you need to show the users. This means if you add a new feature, if you just redesigned the UI, your going to have to redesign it again to accomodate the new feature.

Sadly, this redesign likely means current skins will not work, so we will all be stuck with the default (new) skin until some more are made. Lets hope they do good with the new UI when it comes out so we can all handle it for awhile. :p

Well I'll be damned, that worked. Thanks.

What exactly IS "Scroll Marker"?

If you read something on a page and then scroll up or down by less than the height of the viewport (the small area between the toolbars at the top and the status bar at the bottom), then a portion of the text you have already read still appears on the screen but you also see a new portion of text that you probably haven't read. When you scroll, though, you can easily lose track of which text you had read and which text you had not read. The new scroll marker will show you where the top or bottom of the viewport was before you started scrolling, which gives you an easier way of figuring out where you left off.

The feature has its uses, but I don't think they should enable it by default. I considered it a bug at first, and when I learned what it did, I still found it annoying. I think they might have enabled it for the alpha release to encourage people to offer feedback about it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      520
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      69
  • Tell a friend

    Love Neowin? Tell a friend!