Recommended Posts

Alright right now through our phone company, I am to get 10Mb down, and 512kb up. I don't get close to that. We're switching from Dish to cable (much cheaper where we are). They have 5Mb/512kb up. Compared to dsl, will cable be better?

One thing I will NOT miss is going to facebook and looking at pictures and having to reset my router because it doesnt like websites with lots of pictures for some reason, or it random stops working and needs reset.

This is what I get now

385712648.png

Now any other day, i get only 100-110kb upload.

Once I get cable (tomorrow sometime) is there anything that I can do to max out the connection, so I get what I pay for? Someone told me to check out opendns

Link to comment
https://www.neowin.net/forum/topic/718722-dsl-to-cable-internet/
Share on other sites

Resetting your router due to sites with pictures has nothing to do with your ISP.. If your router is crap then put in a better one.. Its possible the reason you were not seeing your full down is your router. Since you were dsl, I assume you had a gateway device, ie a modem/router combo.

What are you going to be using for cable as your router.

Opendns has nothing to do with your bandwidth. its a replacement nameserver vs using the one your ISP hands you.. Provides filtering, etc. Its quite possible it might be better than your ISP dns, but has nothing to do with if you will see 5MB down from speedtest.net.

I show comcast as blowing away that 5mb your saying.. And they sure are faster than the ISP your currently using. Are you going getting some different ISP?

post-14624-1231343357_thumb.jpg

I always get close to the stated speeds.

post-14624-1231343565.jpg

When I first this DSL, the phone company came out because the internet would go out three to five times a day, they replaced the router they gave me the first time...Still did it, just not as bad. They came out again, replaced it again, still did it. They came out the third and last time, replaced the phone lines, and the router again. Two techs that came out could find no reason why I was getting such slow speeds, it took four-five mins for them to load yahoo, they blamed it on some in their office but didnt know why. So I am finally giving up on them. For some reason though if I goto like facebook is something with alot of pictures it will either A load very slowly, or B just sit there and do nothing, and just freezes my internet. Two different computers as well, both of which are fully updated.

Well nothing against you going to cable.. But your router locking up should have nothing to do with your ISP.

What router were you using.. And what router will you be using with cable.

Cable is normally 2 devices, a modem and then a router. With DSL its normally a combo device (gateway) that has both the modem and router in one device.. IMPO these devices SUCK ;) I would always suggest just a modem and then a router.. But in DSL land this can be difficult to find, most of the devices out there for DSL/ADSL are combo.. You can quite often put your gateway into just bridge mode where now just acts as a modem, ie it does not do NAT.. Just provides the connection.

With DSL you normally have to use a lower MTU as well, since quite often its a PPPoE connection.

If you were having crap service with your DSL provider, its quite possible you will see much better performance with cable.. But again the router in use can make a big difference. Especially when you have a higher speed connection. Some routers have issues with being able to keep up with the higher bandwidth.

So do you know what device(s) your cable provider will be putting in as the modem and router? Quite often they just provide the modem, and its up to you to provide the router.

i am paying for a 5mbit down and 512 k upload with COX and i got this
Yeah I get always get faster than I am paying for as well ;) Im suppose to be on the 6mbit plan.. Im grandfathered in I assume, I have called them a few times about it.. But to make changes would cost me like $20 more a month.

I have been with them for years.. But don't have the TV portion of it, since I have DirecTV for the Sunday Ticket option ;) There pretty much don't offer just internet now without paying a premium.. I could get faster speeds, but will live with what I have for the savings.. ehehhehe

As to just using the modem and not a nat router -- I would highly suggest against that.. For security alone I would suggest you put even just your 1 computer behind a nat.. There is little reason to have your machine directly connected to the public net.

As to just using the modem and not a nat router -- I would highly suggest against that.. For security alone I would suggest you put even just your 1 computer behind a nat.. There is little reason to have your machine directly connected to the public net.

I do have a Linksys Cable Router, not sure on what to do with it, could I use that?

Sure you could -- whats the model number of the router?

In a nutshell you connect it to the modem, then your computer to it.

Uhh not sure

wait,

Model No, Linksys Etherfast Cable/dsl router with 4 port swith BEFSR41 ver. 3

That help?

http://www.linksys.com/servlet/Satellite?c...FVisitorWrapper

I dont have the manual, so I got a link to it on their site, i'll have to try setting it up tomorrow after the guy leaves

Edited by Dane

Yeah that will work, its a bit old.. But I use to have one of those -- ran for years before it gave out ;)

You can grab the manual from the linksys site.

edit: just keep in mind when you change out the device connected to the modem, more than likely you will have to reboot the modem before connecting the new device to clear is association with the previous mac.

Just disconnect your device, then unplug the modem for a bit.. Then plug it back in, once you have all the lights that the modem is reconnected then connect your router -- let it boot up, and then connect your device to the router.. You should then get a private IP 192.168.1.?

You can then access the routers web interface on what is normally 192.168.1.1, default username is normally admin and blank or password.. You can get the details from the manual.

Yeah that will work, its a bit old.. But I use to have one of those -- ran for years before it gave out ;)

You can grab the manual from the linksys site.

edit: just keep in mind when you change out the device connected to the modem, more than likely you will have to reboot the modem before connecting the new device to clear is association with the previous mac.

Just disconnect your device, then unplug the modem for a bit.. Then plug it back in, once you have all the lights that the modem is reconnected then connect your router -- let it boot up, and then connect your device to the router.. You should then get a private IP 192.168.1.?

You can then access the routers web interface on what is normally 192.168.1.1, default username is normally admin and blank or password.. You can get the details from the manual.

Let me swing this by you so I know if I will be doing it right.

So hook up the cable modem, let all the lights come on, connect the router, let it boot, then connect my pc? Since my MAC ID with the modem and the router will be different, does that hurt anything?

I just have to make sure i have the options set as "automaticall detect IP address" for the router, right?

Now the different mac is why you need to reboot the modem before connecting the router.

Yes your internet connection on the router should be set to dhcp, and if comcast the other thing you may need to do on the internet connection of the router is disable STP.

Now the different mac is why you need to reboot the modem before connecting the router.

Yes your internet connection on the router should be set to dhcp, and if comcast the other thing you may need to do on the internet connection of the router is disable STP.

Ahh ok.

Sorry I thought I posted before about the Provider but I didn't. Here in my part of Lancaster County, our Borough has blocked Comcast from providing any service. We get Blue Ridge Cable, and they get their cable internet from Penn Tele Data.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
    • The first improvement they need to make to audio in W11 is to add an equalizer that actually works.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!