Slow To Connect To Neowin

By +Gary7
in Site & Forum Issues

 Share

Recommended Posts

Grand Master

Dane

Posted
Posted

I don't know if this is related but when I am on the main page, I get the error page that comes up when the site goes down telling you to goto the IRC, I refresh and it goes away. I click on a link to go else where on Neowin, and I get the same error, refresh and back to normal.

Grand Master

Ricardo Gil

Posted
Posted
I don't know if this is related but when I am on the main page, I get the error page that comes up when the site goes down telling you to goto the IRC, I refresh and it goes away. I click on a link to go else where on Neowin, and I get the same error, refresh and back to normal.

Been having that behavior intermittently since yesterday, both front page and forums.

It tells me there's been a database error, and after a few refreshes the page eventually loads.

Grand Master

dreamz Veteran

Posted
  • Veteran
Posted

i use k-meleon 1.5.2 and i've been having problems as well. usually i can't load pages (or it takes an extremely long time for them to load), network timeout errors, ips driver errors. this makes it almost impossible to browse neowin.

when i try to browse with internet explorer, pages freeze for 5-10 seconds or so. i can see from the task manager that the cpu usage jumps up to 50%.

  • 3 weeks later...
Veteran

xpgeek

Posted
Posted

Apologize in advance for bumping an old thread if I shouldn't have, its not that old.

Last few days, about a week or more even maybe, browsing Neowin forums has been a struggle. It seems fine and super fast bout 70% of the time, but then I just get pages that take foreverrrr to load, load all messed up with no formatting if they do, or just get this timeout error, constantlyyyyyyyyyyy.

Connection Interrupted

The connection to the server was reset while the page was loading.

The network link was interrupted while negotiating a connection. Please try again.

I've tried adjusting different stuff in Firefox, no pipelining, ipv6 on and off, no adjusting of connection limits, and just using another browser entirely, Google Chrome (official version not the dev version) and IE8 (that ships in Win7 beta). Having exact same problem in every browser no matter what I do.

Before say check firewall/network settings, I have, and, Neowin is the ONLY site I have this problem with.

Its becoming reallyyyy irritating.

Enthusiast

Appzalien

Posted
Posted

I've had problems with the site for some time now but I blamed it on my browser (Maxthon) what happens is it takes several seconds for a page to load but after it does it freezes there and my browser is completely usless until it lets go (usually 20 to 30 seconds if I don't click on things longer if I do). The only other places I see this type of thing are sites with very aggressive ads that try and force their way thru the popup stopper or something. If when the page is frozen, if I click too much the browser becomes completely unresponsive and will not come out of it. I suspect that either the site is trying to show ads that my browser fights with or the site might be infected with malware. There are some really sneaky and troublesome site infections floating around. Within the same page, like editing this post, theres no problem it just happens when changing from page to page or opening the site to log in.

Mentor

jelli

Posted
Posted

I am still suffering from excruciatingly long load times about 70% of the time, sometimes the recent forum activity box doesn't load at all and other pages will load with what seems like no formatting from the CSS.

Starting to wonder if something is up with Windows 7 or Firefox :/

Grand Master

+Gary7 Subscriber²

Posted
  • Author
  • Subscriber²
Posted
I am still suffering from excruciatingly long load times about 70% of the time, sometimes the recent forum activity box doesn't load at all and other pages will load with what seems like no formatting from the CSS.

Starting to wonder if something is up with Windows 7 or Firefox :/

No, I am having the same problems at times. It is probably due to heavy traffic on the servers, but that is just a guess.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft outs Windows 11 KB5095093 with long list of new features

      By leonsk29 · Posted

      "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Microsoft outs Windows 11 KB5095093 with long list of new features

      By leonsk29 · Posted

      Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things

      By TarasBuria · Posted

      Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Subtitle Edit 5.0.0

      By Jaybonaut · Posted

      Pretty nice tool, thanks
    • Politically funny images of the World

      By +primortal · Posted

  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!