Recommended Posts

click start, run, type: gpedit.msc, select Computer Configuration, Administrative Templates, Network, and double click QoS Packet Scheduler. In the right hand window you will see "Limit reservable bandwidth, double click on it, check "Enabled", then set bandwidth limit to zero - Done!!

it doesn't turn out too well tho

click start, run, type: gpedit.msc, select Computer Configuration, Administrative Templates, Network, and double click QoS Packet Scheduler. In the right hand window you will see "Limit reservable bandwidth, double click on it, check "Enabled", then set bandwidth limit to zero - Done!!

That's is a myth for noobs... :p

That reserved bandwidth is ONLY used if you (or your service provider) are using some device or software QoS aware (QoS = Quality of Service)... :cool:

It's not an issue with QoS, since it cannot limit that much bandwidth.

Seeing as the connection wasn't effected by XP Pro and only Server 2k3, it sounds like a services problem.

Did you set your server to have a 'role' yet? If you did, try removing that and see if there is still a problem.

In your NIC cards settings, make sure that your TCP/IP isn't filtering any ports... this could also have a dramatic effect on speed.

Hope that helps. :D

Alright, I have already done all the Qos stuff yesterday, removed it plus set it to 0, even if it was enabled, it wouldnt make too much of a difference since it sets aside 20%, and I have a 3.5meg max, and still only getting 250k, there is a lot missing out of that.

Hadnt given it a role yet either, also last night made sure that there wasnt one set. And there are no tcp filterings set up either.

hmm I'm having the same problem with my 2k3 server I run, I only get around 1.9 megabits per second (190kB/sec), while on my other pc (the one I'm posting from now) I get my full speed of 3.5 megabits per second (350kB/sec)

:blink:

Well I have a 2k3 Server and it seems to be fine. Its my firewall/gateway and fileserver. On my lan from others pc's I am getting 10MB a second, which is a bit less than a 100mbps lan allows (i made all the cables myself so that could be a factor there). I also have gigabit and from that I get about 25MB a second (limited by my the raid array's hard drives). My internet connection seems to fine also, I have Att Broadband and I get about 180k a second from their servers. So it seems as if 2k3 is working fine for me, and its not the os.

Well for hardware comparison to others out there, I am running an amd 2100+, soyo kt333 dragon ultra mb, 512ddr ram, radeon 9k card, 2 40gig hd's one wd and one maxtor. I have tried the ethernet using the onboard generic realtek, as well as my dlink pci card.

Oh well, it has been too long, so Ive decided to go back to xp for now anyway, cant stand losing that much bandwidth for no reason, really need it. Maybe ill go back to 2k3 once i can buy it.

Why not do a dual boot for awhile? Partition the hard drive give each OS a piece. Then go to xyz.com and see how fast a file downloads in xp, then you can boot up into 2k3 and do the same thing. This would rule out the o.s. You allready ruled out the ethernet card. Maybe check the cable but I doubt thats it. It also could be that your ISP is under alot of stress and they are going really slow.

Alright, just finished going back to xp, and now the connection seems to be even faster than it was before, most likely cause i switched to the pci nic instead of the onboard. But it is quite apparent now that it was 2k3 that was causing the missing bandwidth, while downloading drivers in 2k3, most sites i would get a max of 330k/sec, when back in xp 2.5megs/sec

Alright, just finished going back to xp, and now the connection seems to be even faster than it was before, most likely cause i switched to the pci nic instead of the onboard.  But it is quite apparent now that it was 2k3 that was causing the missing bandwidth, while downloading drivers in 2k3, most sites i would get a max of 330k/sec, when back in xp 2.5megs/sec

I don't believe it :-)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Apple raises MacBook and iPad prices as memory costs surge by Karthik Mudaliar Apple has raised the U.S. prices of several MacBook and iPad models, including the MacBook Neo, which it launched for $599 less than four months ago. The company’s cheapest laptop now starts at $699, while some MacBook Pro configurations have increased by $300. The changes affect the MacBook Neo, MacBook Air, MacBook Pro, iPad Air, and iPad Pro. Apple has not changed the hardware or storage included with these models, so customers are simply paying more for the same configurations. Here is how the new US pricing compares with the previous starting prices: Product Previous price New price Increase MacBook Neo $599 $699 $100 13-inch MacBook Air, 512GB $1,099 $1,299 $200 14-inch MacBook Pro, 1TB $1,699 $1,999 $300 16-inch MacBook Pro $2,699 $2,999 $300 11-inch iPad Air, 128GB $599 $749 $150 13-inch iPad Air, 128GB $799 $949 $150 11-inch iPad Pro, 256GB $999 $1,199 $200 13-inch iPad Pro, 256GB $1,299 $1,499 $200 The updated prices are already appearing on Apple’s U.S. online store. The MacBook Neo increase will probably attract the most attention. Apple introduced the laptop in March for $599, pitching it as a more affordable Mac for students and buyers considering Windows laptops or Chromebooks. It uses an A18 Pro processor and originally undercut Dell’s new $699 XPS 13 by $100. Following the increase, the two laptops now have the same starting price. The M5 MacBook Air has also lost the price Apple promoted when it launched in March. The 13-inch model arrived with 512GB of storage for $1,099, while Apple’s store now lists the MacBook Air range as starting at $1,299. The 14-inch MacBook Pro with an M5 chip and 1TB of storage has gone from $1,699 to $1,999. Apple has made similar changes to its iPads. The recently released M4 iPad Air, which launched at the same $599 starting price as its predecessor, now starts at $749 for the 11-inch version. The 13-inch version has risen from $799 to $949. The iPad Pro increases are larger in dollar terms. Apple’s 11-inch M5 iPad Pro now starts at $1,199, up from $999, while the 13-inch version has moved from $1,299 to $1,499. Both base models still include 256GB of storage. Apple blamed the increases on the rapidly rising cost of DRAM and NAND flash, which provide system memory and device storage. The company told Reuters that it had tried to shield customers from the increases but could no longer absorb them. “We have never seen a component price increase this much, this quickly,” Apple said. Tim Cook had already warned that price increases were coming. Cook said Apple’s existing component inventory had softened the immediate impact, but that higher memory costs would increasingly affect the company after the June quarter. Much of the pressure comes from the construction of AI data centers. Memory manufacturers are directing more production toward high-margin server products, leaving PC, tablet, and smartphone makers competing for the remaining supply. Apple has not said whether the new prices are temporary or whether further increases are planned. For now, the changes show that even Apple’s purchasing power has not been enough to keep the AI-driven memory shortage away from consumer devices.
    • Ventoy 1.1.16 is out.
    • This is a none story - these low volume Chinese models will always get new experimental features first because Apple and Samsung can't produce them in huge volume to meet demand.
    • Nvidia GeForce NOW gains support for Dark Scrolls, Empulse, and more by Pulasthi Ariyasinghe The final update of June for Nvidia's cloud gaming service GeForce NOW is now available, and it is touting support for six more games. The company is also drawing subscriber attention towards the summer sales kicking off across stores, so they can stock up on more cloud-supported titles. Of course, the Steam Summer Sale is the biggest promotion, which is kicking off later today. "Supported Steam games can be streamed across devices with GeForce NOW, making it easy to buy a game once, keep progress synced and pick up where the gameplay left off on PCs, Macs, handheld devices, phones, TVs and more," says the company. "In other words, the Steam Summer Sale brings the deals; GeForce NOW adds the flexibility." Don't forget that the GeForce NOW summer sale is still active as well. This limited-time offer drops the 12-month Performance membership from $99.99 to $64.99, saving members $35. At the same time, the 12-month Ultimate membership is currently going for $129.99, dropping the price by $70 from the original $199.99. Here are the games joining GeForce NOW's supported list this week: Dark Scrolls (New release on Steam, available June 22) SAND: Raiders of Sophie (New release on Steam, available June 22) Deer & Boy (New release on Steam, available June 23) EMPULSE (New release on Steam, available June 24) The Adventures of Elliot: The Millennium Tales (Steam) FATAL FURY: City of the Wolves (Steam) With the June expansions coming to an end, Nvidia should be announcing its July GeForce NOW plans next week. Keep in mind that, unlike subscription services like Game Pass or EA Play, a copy of a game must be owned by the GeForce NOW member (or at least have a license via PC Game Pass) to start playing via Nvidia's cloud servers. There is also a limit to how many hours subscribers can use the service per month.
    • Davinci Resolve 21.0.1 by Razvan Serea DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool! Its elegant, modern interface is fast to learn and easy for new users, yet powerful for professionals. DaVinci Resolve lets you work faster and at a higher quality because you don’t have to learn multiple apps or switch software for different tasks. That means you can work with camera original quality images throughout the entire process. It’s like having your own post production studio in a single app! Best of all, by learning DaVinci Resolve, you’re learning how to use the exact same tools used by Hollywood professionals! DaVinci Resolve is the only post production software designed for true collaboration. Multiple editors, assistants, colorists, VFX artists and sound designers can all work on the same project at the same time! Whether you’re an individual artist, or part of a larger collaborative team, it’s easy to see why DaVinci Resolve is the standard for high end post production and is used for finishing more Hollywood feature films, episodic television programing and TV commercials than any other software. Davinci Resolve 21.0.1 release notes: Addressed multiple DNG and Apple ProRAW color issues. Addressed issue with automatic smart bins after deleting keywords. Addressed issue with multiple linked audio in media management. Addressed multiple Resolve FX issues in photo page. Addressed issue with key shortcut to switch viewer in photo page. More consistent creation of new photo albums. Addressed color thumbnail refresh for photo transform indicator. Transcription now honors project settings language. Improved face recognition in IntelliSearch. Addressed exported bins not retaining generator and title properties. Addressed ease control display and sensitivity issues. Addressed keyframe issue when copying clips with Fusion effects. Addressed keyframe refresh for Fusion effects in the edit page. Addressed issue with 3D renders in Linux with non-English locales. Addressed Fusion viewer color issue for some RCM settings. Addressed issue with saturation limits in Fusion gradient controls. Addressed Fusion display issues with dual screen layouts. Addressed issue with non-English character inputs in Linux. Disabling MultiMaster now disables trim blanking controls. Addressed crash in some scenarios with CineFocus. Addressed lag when toggling bypass grades and Fusion effects. Addressed occasional issue with Fairlight loudness meters. Addressed data burn display of good take tag in upgraded projects. Addressed project manager scroll lag for large project libraries. Support for Sony Alpha 7R VI ARW RAW stills. Support for decoding Affinity RGB 16-bit formats. Addressed a color issue with MainConcept H.265 HDR renders. Addressed a color issue with Windows native H.265 HDR renders. RemoveMotionBlur API now uses correct encode parameters. Addressed character limit consistency in GenerateSpeech API. General performance and stability improvements. Download page: Davinci Resolve 21.0.1 | 3300 MB (Free, paid upgrade available) Links: DaVinci Resolve Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      77
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!