Error when pinging router: "PING: transmit failed, error code 1231&quo


Recommended Posts

  mclaren05 said:
Hey

Im trying to ping my DD-WRT Asus WL-500W after activing the USB function and now it gives me a "PING: transmit failed, error code 1231". I tried a 30/30/30 but still nothing. How can I fix it?

Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

  The2 said:
Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

?

I think you are confused. The USB ports are for connecting mass storage devices, printers, webcams, etc...

Not sure what you are talking about.

  Bgnn32 said:
No one wants to help you.

No comment.

  warwagon said:
So if you turn the USB function off do the pings start to work again?

I can't access the router anymore (tried but as you know the pings fail) so I can't turn it off.

  mclaren05 said:
I can't access the router anymore (tried but as you know the pings fail) so I can't turn it off.

The previous comment counds correct. It sounds like activating USB has frozen the modem.

However, do you know if you where using a static IP or dynamic (DHCP) addressing? If you where using static, doing an ipconfig /all will not really show anything out of the ordinary.

If you release the IP and renew it, does it work?

As you activated the USB function, can you connect to the device using USB instead of network? If that works, can you get in the routers console and see if anything else changed since activating USB?

Other than that, try either simply powering the device off and on again after about 10 seconds and see if it comes back up, otherwise a hard reset physically from the device may be the only other method left to try.

  The2 said:
Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

Some routers allow it, however why you would want to i dont know, its just an extra driver and device for Windows to activate during startup, whereas connecting through CAT5 would mean just using the existing network card to connect to the router.

  furby said:
Can you (hard) reset it manually? What do you have plugged into the USB ports?

And what OS are your running out of interest?

Ive already reseted and hardreset it. I have nothing plugged into the USB ports.

On my PC or my router? Im running on the PC Windows Vista.

  zivan56 said:
Sounds like your router is frozen and your computer has no IP address on the network it is connected to...

What is the output of: ipconfig /all

?

Im going to RMA but if I remember I believe it didnt show a gateway and it just showed the same IP and 255.0.0.0

  Rich said:
The previous comment counds correct. It sounds like activating USB has frozen the modem.

However, do you know if you where using a static IP or dynamic (DHCP) addressing? If you where using static, doing an ipconfig /all will not really show anything out of the ordinary.

If you release the IP and renew it, does it work?

As you activated the USB function, can you connect to the device using USB instead of network? If that works, can you get in the routers console and see if anything else changed since activating USB?

Other than that, try either simply powering the device off and on again after about 10 seconds and see if it comes back up, otherwise a hard reset physically from the device may be the only other method left to try.

The router has a DHCP server. I manually set a static IP thru Windows (since the router didnt assign a IP) and still nothing

Ive tried renewing but nothing happens. Same thing

The USB function is to attach a printer, mass storage device, webcam, etc to share with the network.

Ive already turned it off/reset/etc. Explain a "hard reset physically" as maybe I havent done that.

  mclaren05 said:
Ive already turned it off/reset/etc. Explain a "hard reset physically" as maybe I havent done that.

That is where you take a pen and push and hold the little reset button on the back of the router in for about 10 seconds or usually until the power light flashes. This rests the router back to the default settings, as opposed to unplugging it and plugging it back in which just restarts the router (soft reset) just as you would restart your pc.

The hard reset usually means finding a pin or something and placing it in a hole round the back of your router with Reset underneath. Once you've done that it'll probably reset everything to factory defaults and you may be good to go

Edit: Beat me to it :)

  warwagon said:
That is where you take a pen and push and hold the little reset button on the back of the router in for about 10 seconds or usually until the power light flashes. This rests the router back to the default settings, as opposed to unplugging it and plugging it back in which just restarts the router (soft reset) just as you would restart your pc.
  jswalker2 said:
The hard reset usually means finding a pin or something and placing it in a hole round the back of your router with Reset underneath. Once you've done that it'll probably reset everything to factory defaults and you may be good to go

Edit: Beat me to it :)

Understood and yes I have done this :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Seconded on the question. This is otherwise great for testing out systems as well.
    • thanks for that yeah its real its not fake guys i got it of amazon  how do i fix this please the good thing its not fake  
    • Oh Ok thank you,   i'll try to trace which one is the front fans and go from there, i forgot i posted on this issue before oopsy.        But they might already be connected right all i know lol.       I tend to worry way too much i think  
    • //merged your topics as they are the same thing. Same answer as well...    
    • Facebook's mobile app is finally getting support for passkeys by Usama Jawad Companies and social media platforms are embracing passkeys more readily nowadays. Microsoft made new accounts passwordless by default just last month, Windows 11 has supported passkeys for quite a while, and Google hasn't been left behind either. Interestingly, while passkeys work on WhatsApp too, Facebook hasn't enjoyed the same functionality, even though both apps are owned by the same parent company, Meta. Well, that changes today. Meta has announced support for passkeys in Facebook's mobile app. For those unaware, passkeys are essentially an alternative for passwords, as they allow you to sign in to a service securely using the same means that you use to unlock your device. This includes biometric authentication mechanisms such as facial and fingerprint recognition, as well as PIN. Since you don't need to memorize or externally store a complex password, and the methods highlighted above can't be easily duped, you effectively become more secure when you leverage passkeys. Passkeys were developed by the FIDO Alliance, and Meta is a member of this collective too. Apart from highlighting the benefits of passkeys, such as being pretty much immune to phishing and password spray attacks, Meta has revealed that they are coming to the Facebook mobile app on Android and iOS. They will also be arriving on Messenger in the next few months, and both services will share the same passkey for a more streamlined experience. Meta will also allow customers to utilize this passkey to securely autofill payment information when leveraging Meta Pay. Customers can head over to the Accounts Center in the Settings area to create and manage their passkey, or alternatively, they'll also be prompted to create one when they log in to Facebook next. It is important to note that Meta isn't doing away with passwords on Facebook just yet, as all devices may not be compatible with passkeys.
  • Recent Achievements

    • First Post
      TIGOSS earned a badge
      First Post
    • Week One Done
      slackerzz earned a badge
      Week One Done
    • Week One Done
      vivetool earned a badge
      Week One Done
    • Reacting Well
      pnajbar earned a badge
      Reacting Well
    • Week One Done
      TBithoney earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      690
    2. 2
      ATLien_0
      284
    3. 3
      Michael Scrip
      221
    4. 4
      +FloatingFatMan
      197
    5. 5
      Steven P.
      132
  • Tell a friend

    Love Neowin? Tell a friend!