Error when pinging router: "PING: transmit failed, error code 1231&quo


Recommended Posts

  mclaren05 said:
Hey

Im trying to ping my DD-WRT Asus WL-500W after activing the USB function and now it gives me a "PING: transmit failed, error code 1231". I tried a 30/30/30 but still nothing. How can I fix it?

Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

  The2 said:
Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

?

I think you are confused. The USB ports are for connecting mass storage devices, printers, webcams, etc...

Not sure what you are talking about.

  Bgnn32 said:
No one wants to help you.

No comment.

  warwagon said:
So if you turn the USB function off do the pings start to work again?

I can't access the router anymore (tried but as you know the pings fail) so I can't turn it off.

  mclaren05 said:
I can't access the router anymore (tried but as you know the pings fail) so I can't turn it off.

The previous comment counds correct. It sounds like activating USB has frozen the modem.

However, do you know if you where using a static IP or dynamic (DHCP) addressing? If you where using static, doing an ipconfig /all will not really show anything out of the ordinary.

If you release the IP and renew it, does it work?

As you activated the USB function, can you connect to the device using USB instead of network? If that works, can you get in the routers console and see if anything else changed since activating USB?

Other than that, try either simply powering the device off and on again after about 10 seconds and see if it comes back up, otherwise a hard reset physically from the device may be the only other method left to try.

  The2 said:
Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

Some routers allow it, however why you would want to i dont know, its just an extra driver and device for Windows to activate during startup, whereas connecting through CAT5 would mean just using the existing network card to connect to the router.

  furby said:
Can you (hard) reset it manually? What do you have plugged into the USB ports?

And what OS are your running out of interest?

Ive already reseted and hardreset it. I have nothing plugged into the USB ports.

On my PC or my router? Im running on the PC Windows Vista.

  zivan56 said:
Sounds like your router is frozen and your computer has no IP address on the network it is connected to...

What is the output of: ipconfig /all

?

Im going to RMA but if I remember I believe it didnt show a gateway and it just showed the same IP and 255.0.0.0

  Rich said:
The previous comment counds correct. It sounds like activating USB has frozen the modem.

However, do you know if you where using a static IP or dynamic (DHCP) addressing? If you where using static, doing an ipconfig /all will not really show anything out of the ordinary.

If you release the IP and renew it, does it work?

As you activated the USB function, can you connect to the device using USB instead of network? If that works, can you get in the routers console and see if anything else changed since activating USB?

Other than that, try either simply powering the device off and on again after about 10 seconds and see if it comes back up, otherwise a hard reset physically from the device may be the only other method left to try.

The router has a DHCP server. I manually set a static IP thru Windows (since the router didnt assign a IP) and still nothing

Ive tried renewing but nothing happens. Same thing

The USB function is to attach a printer, mass storage device, webcam, etc to share with the network.

Ive already turned it off/reset/etc. Explain a "hard reset physically" as maybe I havent done that.

  mclaren05 said:
Ive already turned it off/reset/etc. Explain a "hard reset physically" as maybe I havent done that.

That is where you take a pen and push and hold the little reset button on the back of the router in for about 10 seconds or usually until the power light flashes. This rests the router back to the default settings, as opposed to unplugging it and plugging it back in which just restarts the router (soft reset) just as you would restart your pc.

The hard reset usually means finding a pin or something and placing it in a hole round the back of your router with Reset underneath. Once you've done that it'll probably reset everything to factory defaults and you may be good to go

Edit: Beat me to it :)

  warwagon said:
That is where you take a pen and push and hold the little reset button on the back of the router in for about 10 seconds or usually until the power light flashes. This rests the router back to the default settings, as opposed to unplugging it and plugging it back in which just restarts the router (soft reset) just as you would restart your pc.
  jswalker2 said:
The hard reset usually means finding a pin or something and placing it in a hole round the back of your router with Reset underneath. Once you've done that it'll probably reset everything to factory defaults and you may be good to go

Edit: Beat me to it :)

Understood and yes I have done this :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • From cars to cosmos: Honda's experimental rocket aces first landing test by Paul Hill Image via Honda Watch your back SpaceX, the Japanese company Honda has just performed a successful first launch of its experimental reusable rocket. The 6.3 meter rocket, which weighs 900kg, reached a modest altitude of 271.4 meters, but managed to land within 37cm of its target (1.2 feet), which is certainly pretty close. The rocket took off from a Honda facility in Taiki Town, Hokkaido, a growing space town in Japan. The flight time was also modest, coming in at just 56.6 seconds, but in that time, Honda was able to demonstrate key reusability technologies such as flight stability and landing capability. This marks a significant milestone for Honda’s space R&D department, which began work just four years ago. If you remember the tests SpaceX was performing around 2012 with Grasshopper, well Honda is at about the same stage with its reusable rocket. Why Honda is building rockets: Beyond cars and motorcycles Honda said that it wants to leverage core technologies it already works on for offering space services. It said that reusable rockets are a key part of sustainable space transportation. By 2029, the company wants to be able to perform suborbital launches, and while commercialization hasn’t been decided yet, it sees itself launching remote-sensing and wide-area communication satellites in the future. The Japanese car maker sees growing demand for satellite launches and wants to be involved by developing reusable rockets which could help it perform such launches economically. If it does end up finding customers, it will add more competition to the rocket launch sector. While the company hasn’t confirmed this, by developing its own launch system, it could eventually be in a position to launch its own satellites that could provide services to its cars to add value for customers. The competitive landscape and Japan's space ambitions Honda is just the latest company to join the growing list of companies trying to develop reusable rocket technology. The most famous companies doing this are SpaceX and Blue Origin, but there are also lots of other companies around the world also developing this technology. Honda is still taking baby steps compared to SpaceX, but it shows that the company is taking a focused, step-by-step approach, and achieving successes as noted by this launch. Hopefully, the company ends up providing tough competition against SpaceX, Blue Origin, and other companies so that it can help to drive down prices and spur on innovation.
    • Does that subscription include international data roaming, inclusive of Russia?
    • If you're stupid enough to try and get one, each and every headache along the way is on you. I can only hope that these roadblocks on a pre-order are enough to dissuade people.
    • "You should have a Microsoft Account because we can help keep your data safe...until we can't." As an IT guy I know that I should never put my trust in one backup solution if the data is important. But for non-IT people, they are getting tricked into Microsoft's practices with falsehoods.
    • it is delayed and has no definitive release date... that is "delayed indefinitely".
  • Recent Achievements

    • Week One Done
      TBithoney earned a badge
      Week One Done
    • First Post
      xuxlix earned a badge
      First Post
    • First Post
      Tomek Święcicki earned a badge
      First Post
    • One Year In
      carlitin86 earned a badge
      One Year In
    • Reacting Well
      Peterlll06 earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      684
    2. 2
      ATLien_0
      289
    3. 3
      Michael Scrip
      228
    4. 4
      +FloatingFatMan
      192
    5. 5
      Steven P.
      145
  • Tell a friend

    Love Neowin? Tell a friend!