Error when pinging router: "PING: transmit failed, error code 1231&quo


Recommended Posts

  mclaren05 said:
Hey

Im trying to ping my DD-WRT Asus WL-500W after activing the USB function and now it gives me a "PING: transmit failed, error code 1231". I tried a 30/30/30 but still nothing. How can I fix it?

Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

  The2 said:
Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

?

I think you are confused. The USB ports are for connecting mass storage devices, printers, webcams, etc...

Not sure what you are talking about.

  Bgnn32 said:
No one wants to help you.

No comment.

  warwagon said:
So if you turn the USB function off do the pings start to work again?

I can't access the router anymore (tried but as you know the pings fail) so I can't turn it off.

  mclaren05 said:
I can't access the router anymore (tried but as you know the pings fail) so I can't turn it off.

The previous comment counds correct. It sounds like activating USB has frozen the modem.

However, do you know if you where using a static IP or dynamic (DHCP) addressing? If you where using static, doing an ipconfig /all will not really show anything out of the ordinary.

If you release the IP and renew it, does it work?

As you activated the USB function, can you connect to the device using USB instead of network? If that works, can you get in the routers console and see if anything else changed since activating USB?

Other than that, try either simply powering the device off and on again after about 10 seconds and see if it comes back up, otherwise a hard reset physically from the device may be the only other method left to try.

  The2 said:
Why would you access your router through USB? AFAIK you can use it only as a modem through USB, not router

Some routers allow it, however why you would want to i dont know, its just an extra driver and device for Windows to activate during startup, whereas connecting through CAT5 would mean just using the existing network card to connect to the router.

  furby said:
Can you (hard) reset it manually? What do you have plugged into the USB ports?

And what OS are your running out of interest?

Ive already reseted and hardreset it. I have nothing plugged into the USB ports.

On my PC or my router? Im running on the PC Windows Vista.

  zivan56 said:
Sounds like your router is frozen and your computer has no IP address on the network it is connected to...

What is the output of: ipconfig /all

?

Im going to RMA but if I remember I believe it didnt show a gateway and it just showed the same IP and 255.0.0.0

  Rich said:
The previous comment counds correct. It sounds like activating USB has frozen the modem.

However, do you know if you where using a static IP or dynamic (DHCP) addressing? If you where using static, doing an ipconfig /all will not really show anything out of the ordinary.

If you release the IP and renew it, does it work?

As you activated the USB function, can you connect to the device using USB instead of network? If that works, can you get in the routers console and see if anything else changed since activating USB?

Other than that, try either simply powering the device off and on again after about 10 seconds and see if it comes back up, otherwise a hard reset physically from the device may be the only other method left to try.

The router has a DHCP server. I manually set a static IP thru Windows (since the router didnt assign a IP) and still nothing

Ive tried renewing but nothing happens. Same thing

The USB function is to attach a printer, mass storage device, webcam, etc to share with the network.

Ive already turned it off/reset/etc. Explain a "hard reset physically" as maybe I havent done that.

  mclaren05 said:
Ive already turned it off/reset/etc. Explain a "hard reset physically" as maybe I havent done that.

That is where you take a pen and push and hold the little reset button on the back of the router in for about 10 seconds or usually until the power light flashes. This rests the router back to the default settings, as opposed to unplugging it and plugging it back in which just restarts the router (soft reset) just as you would restart your pc.

The hard reset usually means finding a pin or something and placing it in a hole round the back of your router with Reset underneath. Once you've done that it'll probably reset everything to factory defaults and you may be good to go

Edit: Beat me to it :)

  warwagon said:
That is where you take a pen and push and hold the little reset button on the back of the router in for about 10 seconds or usually until the power light flashes. This rests the router back to the default settings, as opposed to unplugging it and plugging it back in which just restarts the router (soft reset) just as you would restart your pc.
  jswalker2 said:
The hard reset usually means finding a pin or something and placing it in a hole round the back of your router with Reset underneath. Once you've done that it'll probably reset everything to factory defaults and you may be good to go

Edit: Beat me to it :)

Understood and yes I have done this :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Samsung could unveil its Galaxy XR headset ‘Project Moohan' in September by Sagar Naresh Bhavsar Next month, Samsung is expected to unveil the Galaxy Z Fold7, the Galaxy Z Flip7, and an affordable Galaxy Z Flip7 FE, along with the Galaxy Watch8 series. However, the launches don't end there. A fresh report out of South Korea hints that Samsung could launch its much-awaited Galaxy XR augmented reality headset in September. The company has codenamed its first XR headset as "Project Moohan," which translates to "Project Infinite." Samsung has already showcased the Galaxy XR headset a few times in the past. In fact, popular tech YouTuber Marques Brownlee - also known as MKBHD -, got his hands on the Galaxy XR and revealed interesting details about the upcoming device. The Galaxy XR is rumored to come with a sharper display compared to the Apple Vision Pro and run on Google's new operating system for AR and VR headsets, the Android XR. Fast forward to now, Korean publication Newspim reports that Samsung is ready to launch the Galaxy XR headset on September 29 in its home country. Notably, the headset will be unveiled at an Unpacked event and later will go on sale on October 13. Globally, the Galaxy XR headset is expected to launch soon afterwards, though any specific date isn't mentioned. Additionally, the report suggests that fans can expect more teaser videos and prototypes of the headset at the upcoming Unpacked event for the Galaxy Z Fold7 and Flip7. The report also spills some details about the specifications of the Galaxy XR headset. Under the hood, it could run on Qualcomm's new XR2+ Gen 2 chip, made using Samsung's 4nm process. Samsung is also expected to introduce tight integration with its Galaxy ecosystem to offer a connected experience. It will be interesting to see how Samsung holds up against the likes of Meta, which already dominates the XR market, while Apple struggles with high Vision Pro prices.
    • I've put it behind a login for the time being.  I had something like 600,000 requests from just from Alibaba IP addresses that didn't clarify they were bots or scrapers, and so not easy to block using user agent filtering.  I didn't have any issues with bandwidth or accessibility, but that's 600,000 requests just from one cloud provider made to my spinning rust hard drives, that I have to personally pay for when they die, by bots being ran by corrupt mega corporations ignoring my polite requests that they not scrape me and that the information only be accessed by real humans. If any of y'all here were actually using my Kiwix mirror, I have no issue whatsoever creating a username and password for you, just hit me up using one of the methods listed on my personal site and I'll make one for you. https://marcusadams.me
    • I always turn encryption off 1st boot, crazy its on by default on new computers, it should ASK you ON or OFF on 1st boot,, So many people dont even know its on , then forget their windows login and microsoft account,, RETarDED Microsoft is now, , i also find having it on slows things down too
    • Adding AI is just an excuse to hike prices. I don't want any AI features in our Slack workspace and yet will have to pay for it.
    • Hello Could you be kind too help me fix this 3.1gig and not 256gig it says 3.1gig only .someone told me to fix it with this https://www.disk-partition.com/articles/64gb-flash-drive-only-showing-32gb-5740i.html yes my sandisk ultra usb 3.0 256gb wont show up in full .  but i don't know want options i have to use on there can someone  please guide me with step by step instructions please  guide me with step by step instructions on how to repair this .sorry for asking but I've tried but i don't know want i have to do on that programme please help me i am on windows 11 home thank you nick
  • Recent Achievements

    • Week One Done
      vivetool earned a badge
      Week One Done
    • Reacting Well
      pnajbar earned a badge
      Reacting Well
    • Week One Done
      TBithoney earned a badge
      Week One Done
    • First Post
      xuxlix earned a badge
      First Post
    • First Post
      Tomek Święcicki earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      675
    2. 2
      ATLien_0
      288
    3. 3
      Michael Scrip
      223
    4. 4
      +FloatingFatMan
      195
    5. 5
      Steven P.
      144
  • Tell a friend

    Love Neowin? Tell a friend!