Recommended Posts

Well lets start new topic on the RC branch

Well i feel this build is slightly buggy

1. WMP12 in now playing mode sometimes doesnt show slider positions and buttons

It is fixed by minimizing and maximising but annoying

2. Explorer is not showing thumbnails on folders as it did in vista even if theres folder.jpg inside each folder

3. Still no transfer speed while copying/moving files (Done on purpose ??)

4. I had activated the build yesterday using a legit key and today it shows windows is not activated and none of the keys work

5. Aero close button fluctuations on any device properties in device manager.

This is all on my 64 bit edition, 32 may vary although it seems strange I haven't tried it to know.

1. Report to MSFT using the Control Panel Send Feedback or else use the Desktop shortcut if you kept it.

2. Change the view to Medium, Large, or Extra Large. If that is what you use thats not normal because it works fine here and presumably for others too.

3. It is there, how is it gone, I'll post a screenshot later

4. Report to MSFT, but always remember this, install your drivers first then activate Windows because it sees some new drivers as entirely new hardware and cuts it off.

5. Again MSFT

Well lets start new topic on the RC branch

Well i feel this build is slightly buggy

1. WMP12 in now playing mode sometimes doesnt show slider positions and buttons

It is fixed by minimizing and maximising but annoying

2. Explorer is not showing thumbnails on folders as it did in vista even if theres folder.jpg inside each folder

3. Still no transfer speed while copying/moving files (Done on purpose ??)

4. I had activated the build yesterday using a legit key and today it shows windows is not activated and none of the keys work

5. Aero close button fluctuations on any device properties in device manager.

transfer speed while copying/moving files works here in build 7048 :)

Well lets start new topic on the RC branch

Well i feel this build is slightly buggy

1. WMP12 in now playing mode sometimes doesnt show slider positions and buttons

It is fixed by minimizing and maximising but annoying fine on mine

2. Explorer is not showing thumbnails on folders as it did in vista even if theres folder.jpg inside each folder fine on mine

3. Still no transfer speed while copying/moving files (Done on purpose ??) fine on mine, click down arrow

4. I had activated the build yesterday using a legit key and today it shows windows is not activated and none of the keys work fine on mine

5. Aero close button fluctuations on any device properties in device manager. still bugged, but hardly important

Fixed dual tuner detection but still will not use both.

dbgsao.jpg

All those folders have the folder.jpg file in them but still no thumbnails for most of them

Not supposed to anymore, they are live to show whats in them.

This isn't a bug, but as the topic is Discussions & Bugs, I think this applies :)

I've got a legit Beta key for 7000, and have that installed (in fact am using it right now), anyway, can I upgrade 7000 to 7048 with my beta key!?

Sorry, if this is discussed elsewhere, I did do a quick look but couldn't see it mentioned anywhere.

This isn't a bug, but as the topic is Discussions & Bugs, I think this applies :)

I've got a legit Beta key for 7000, and have that installed (in fact am using it right now), anyway, can I upgrade 7000 to 7048 with my beta key!?

Sorry, if this is discussed elsewhere, I did do a quick look but couldn't see it mentioned anywhere.

Yes u can upgrade

but only from X86 -> X86 and X64 -> X64 only

Anyone noticed any problems with Homegroup, i.e you select a folder to share and make it read/write and the icon remains the same so you get no indication that the folder is indeed a share. also that the selected folder does not show in the homegroup, although the regular ones do, like Music, Pictures, Videos.

and a 20 second delay when you select all programs.

One thing they could possibly do for Disk Defragmenter is make it so that it tells you whether it's necessary to defrag or not, currently it tells you how much is fragmented.

I believe on XP, it would do this.

what are ppl's expiry dates heard it expires in june

Mine is July 1st

Has been working better than the last 7022 version for me as well.

I get transfer speeds showing up.

It corrected some errors I had with my Data Color Spyder Elite 3 that I had. It now detects and installs the software fine. It didn't do that before. So they made that better. I installed the hardware update on the 7022 build and it didn't work. The new build now works perfectly with it.

I still think they can improve on the Windows Start Button as well as the superbar. They need to make the active tab more flashy to get attention before you hover over it. I know it is there and which programs as minimized but consumers are looking for something that will stand out. Maybe more contrasting colors in the tabs.

Bug/BSOD if I enabled Firewire(1394) on the motherboard and try to boot with it on I get BSOD. It will BSOD everytime which it didn't do in 7022/7000. I don't use it now but I did use it before in 7022. I just moved the External Drives to USB instead.

I upgraded from x86 7022 to x86 7048. Went smooth. Took a while though.

Things I have noticed no one has mentioned here:

In 7022 I had the taskbar thumbnails disabled. I don't like them. But for some reason they won't stay disabled anymore through gpedit.msc

Anyone know a fix?

My WEI for gaming graphics went down a lot for some reason. It was 6.9 in 7000 & 7022. Now it is 6.0 in 7048. All the others stayed the same. I am using Cats 9.1 4870 1GB (780/925). Perhaps it will go back up with new official ATI Win7 drivers?

I find 7048 boots faster a tiny bit more than 7022. Overall OS experience seems a bit more snappy too.

Can anyone confirm that rolling the mouse over the Start Menu links to your personal folders, Documents, Music, Pictures flickers the bottom part of the Start Menu when the Basic theme (no Aero) is on? If so, that is a pretty big bug that was fixed in 7022 (with the orb itself flickering).

Also, when Alt-Tab'ing, does the Alt-Tab window itself disappear while switching between previews or does it stay? The whole window goes away and just the program icons remain.

It is happening in 7048 x86 for me.

Edited by dcoaster

Only two new issues for me.

1. WEI won't complete. Crashes at the very end of the assessment.

2. In WMP12 Now Playing mode previously if I click Show List it would stay there everytime I opened and closed it but now I have to click Show List everytime I go into Now Playing mode. Very annoying.

Other issues I've had since the beta

1. When deleting or formatting a dvd the dvd drive shows up twice in windows explorer until I refresh it.

2. The dvd drive does not show how much space is free when items are written to a dvd only when it's emtpy. Also the bar is always empty whether it's empty or not. It also somes times says it's empty when it's not.

3. Audio volume drops after a days use. Sounds like it's on 80% volume after a day even though it's always set to 100% on all sections.

Oh my God, Microsoft is having same mistakes than in Vista

This is not a public build, nor was it meant to be leaked. So I don't see how they're making the same mistakes. If RAM usage is significantly higher in the final RC1 build then that will be cause for concern.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      neufuse
      65
  • Tell a friend

    Love Neowin? Tell a friend!