Recommended Posts

See now prior to 7000, Vista on same laptop which is fairly high spec would, at "distance" from the wireless router (15 metres as crow flies, but through around 6/7 walls and ceilings) give me wireless internet connectivity dropouts of which were "fairly" common for me, in the sense that i'd lose internet (although not actual network) connectivity around 3-4 times a week.

I have to say though, 7000 (the only build i had ever tried until 4 hours ago) dropped out almost 2-3 times an hour, sometimes for seconds others for a couple of minutes. It made BBC iPlayer almost unuseable, and websites not render properly (missing images, frames, layouts not formatted properly) because of data getting "lost" on the way.

I tested my theory a week or so ago by taking my laptop to within a few feet of the router to find the same problems occured under 7000 (but altogether eliminated under Vista).

I now have installed 7077 - I have to say from _my_ experience these issues have gone. More surprising is that so far is that my internet connection, (or rather wireless connection) seems very much more stable by a very noteable amount in terms of both reliability and throughput speed in communications (downstream and up) over the internet. Whereas under 7000 i'd achieve 100k/sec at best (admittedly it would on rare (i mean rare) occasion hit 300k/sec mark) and Vista would roughly achieve 140k/sec-350k/sec 7077 has consistently given me 450-500k/sec for the last 2 hours as i've downloaded all the (free) updates and applications i use.

Luck? Coincidence? I'm not sure. It's entirely possible that it's simply a case of someone having repositioned the router antennae at a slightly/majorly different angle or position thus bringing me into the 802.11 G signal "donut" a bit more.

Or it could be that drivers/updates/enhancements have been responsible for my apparent issue "fix"

Either way so far, 7077 is very much a winner for me.

One last thing though..

"Festival" sound scheme is damn annoying

Edited by chrispinto
You guys need to update the drivers on your wireless cards, as well as the firmware on your routers.

I've had absolutely no problems whatsover with my Intel N card and my Tomato-loaded Buffalo router.

Well, I fixed it, and I did nothing to my router. It was quite simple actually. It seems that my boardcom drive was automatically updated in Windows Update center. When I switched it back to the stock drive my internet worked perfectly.

To switch back you go to the device manager center. You need to find your soundcard and 'update' the drive. Choose 'I Have Disk' than the bottom option. It than listed two options for me. One was the updated version of the drive, and the other was the stock version. I choose the stock version and it started working.

Every build after 7000 has a certain per cent of users experiencing random loss of internet both on wired and wireless connections. The bug defies troubleshooting, hangs on restart requiring hard shutdown, then resets upon start up.

Even though daily builds are notorious for having bugs not yet worked out, it seems strange this same bug would exist through so many builds.

Waiting to hear if it repeats in 7077.

Can't confirm on 7077 as not installed yet, but with 7068, yeah

Well, I fixed it, and I did nothing to my router. It was quite simple actually. It seems that my boardcom drive was automatically updated in Windows Update center. When I switched it back to the stock drive my internet worked perfectly.

To switch back you go to the device manager center. You need to find your soundcard and 'update' the drive. Choose 'I Have Disk' than the bottom option. It than listed two options for me. One was the updated version of the drive, and the other was the stock version. I choose the stock version and it started working.

Sound card was knocking out internet? Do you mean Broadcom net adapter?

Thank god I'm not the only person having this problem.

I've been having connection problems with every build since 7000 (running 7068 just now)

I have to physically reboot my router to get the connection working again.

I don't think it's a problem with my router because my iPhone, PS3 & Xbox 360 can still connect to the internet when the windows machine can't.

Yep just starting happening. Worked for about 2 hours after installing 7077 X-64. New router which works fine on Vista, plus no new firmware available. Im hard wired but the rest of the machines are wireless and they are working fine. Like someone said welcome to the world of BETA.

PS: Forgot to mention this is the first build that this problem has occured..

Well, I fixed it, and I did nothing to my router. It was quite simple actually. It seems that my boardcom drive was automatically updated in Windows Update center. When I switched it back to the stock drive my internet worked perfectly.

To switch back you go to the device manager center. You need to find your soundcard and 'update' the drive. Choose 'I Have Disk' than the bottom option. It than listed two options for me. One was the updated version of the drive, and the other was the stock version. I choose the stock version and it started working.

thats what i was goin to do, good to know

Unchecking "Allow the computer to turn off this device to save power" in the network adapter power management properties fixed this problem for me. Give it a try.

Sorry to say that this did not work either in my 7077. Retreating to 7000 partition on this machine until another possible fix comes along.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Anyway to download these versions without being on the Experimental builds?
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!