Recommended Posts

I've been running Windows 7 since the somewhat buggy 6xxx days, and I've been using a network printer here at home with no problems.

The printer was an old HP Photosmart 7150. Just recently, we bought a multifunction HP Photosmart C6380 and I can't for the life of me get the printer to work on Windows 7 RC x64, whereas the old printer worked just fine. I've tried the printer's wireless capabilities and they work surprisingly well on the Vista x86 system, but no matter what I do I can't get it to work on the 64-bit 7 machine.

So I tried usb, and once again, with the old printer, I could find the printer attached to the Vista system and Add a Network Printer and it would work just fine, but for whatever reason the new printer will not print. I've tried both the HP print drivers and the drivers that are installed by Windows 7 when you Add a Printer, and both recognize the device fine, but when it comes to printing a test page, an error pops up saying "Test page failed to print. Please run the troubleshooter". So naturally, I ran the troubleshooter... which couldn't find a problem. Lovely.

Anyway, right now I'm resorting to printing to PDF with the Bullzip PDF Printer, and over the network opening it from the Vista machine and printing from there, but I would really appreciate the ability to print to the network printer.

I read online somewhere that HP just doesn't support x64, which in this day and age, is stupid (flash would be nice too Adobe...), but then how do I explain the old HP printer working flawlessly?

I was just wondering if anyone had any similar issues, either with wireless printing, or just with HP printers in general, and if they found ways to fix the problem.

Thanks in advance!

Link to comment
https://www.neowin.net/forum/topic/765756-windows-7-rc-x64-and-printers/
Share on other sites

  • 1 month later...
I sure that HP not being x64 is incorrect. I have two multifunction HP's on my 7 x86 right now, but will be going x64 this weekend. :(

I have an old (and I mean four years old!) DeskJet 940C connected via USB. Every OS that's every been connected to it, whether 32-bit or 64-bit, has printed if it supported the USB port the printer was connected to. (Windows, Linux, BSDs, Solaris, even OS X; in fact, because the computer triple-boots, I've printed from Windows 7, Kubuntu 64-bit, and Leopard all in the same day.) Yes; all three are 64-bit.

It's because of the sheer never-fail spotting of the printer by every OS that supports USB that I called it "the embodiment of Plug and Print". I have never needed to install a printer driver in the entire time I've owned the printer (which is on its second *computer*). As long as the printer keeps running and I can get ink at reasonable prices, I see absolutely zero reason for the printer to ever retire.

While others may swear at their USB printers, I swear "by" this one.

What OS is the sharing computer using?

From what I've learned, it's just a problem with Windows 7 x64 connecting to a printer over a network; in most cases a direct USB connection works fine. No one has been able to find a solution that works :(

I'm running RC x64, and connect to an Officejet Pro 8500 series over the network without issues (printing wise ....)

The computer the printer is attached to is Vista SP1 32-bit, and I'm trying to access it over the network from Windows 7 RC x64. All of the similar cases I've come across have no solution.

Jason, what OS is the printer on and did you do anything special to make it work?

The computer the printer is attached to is Vista SP1 32-bit, and I'm trying to access it over the network from Windows 7 RC x64. All of the similar cases I've come across have no solution.

Jason, what OS is the printer on and did you do anything special to make it work?

The printer I'm using includes an ethernet port, so it is directly connected to the network, rather than connected to a PC and 'shared' onto the network. The model you mention, if I'm not wrong it also includes an ethernet port. Can you not connect it directly into the router, or if it has wireless connect to the router via Wifi.

I've installed two HP printers connected to win7 RC x64 over the network (two different locations ... home and office ... two different PCs running win7). The first one I already mentioned, connected via ethernet to the router, works no problems. The second one at home connects to the router via WiFi and also works no problem.

Just curious, why are you connecting it to a PC and sharing it, rather than connecting to the network directly?

The printer I'm using includes an ethernet port, so it is directly connected to the network, rather than connected to a PC and 'shared' onto the network. The model you mention, if I'm not wrong it also includes an ethernet port. Can you not connect it directly into the router, or if it has wireless connect to the router via Wifi.

I've installed two HP printers connected to win7 RC x64 over the network (two different locations ... home and office ... two different PCs running win7). The first one I already mentioned, connected via ethernet to the router, works no problems. The second one at home connects to the router via WiFi and also works no problem.

Just curious, why are you connecting it to a PC and sharing it, rather than connecting to the network directly?

That's a very good question, I'm not sure why I'm not connecting it directly to the router via ethernet... I did try wi-fi and that didn't work, and it also wasn't all that reliable on the Vista machine via wi-fi either, which I found odd... I will have to see if connecting it directly to the router via wi-fi is a better option. I did also try over the network from my Windows 7 x86 machine, and it printed no problem, so it's definitely a problem with 7 x64, either on Microsoft's end or with HP's driver support. I'll try the ethernet though, thanks for your input!

  • 4 weeks later...
I have a DeskJet 680C, from back before anyone believed in USB. I can't directly print from Win7 x64, because there are no drivers (and HP is not willing to write 64-bit drivers for something so old). I have to use Virtual XP Mode to print.

Try using a similar driver that is known to be supported (in fact, my 940C replaced the 680C in the DeskJet line).

Most printer manufacturers have VERY few specific-model features in their printer drivers (not even HP).

What APPEARS to be a lot of specific-mdel drivers turns out to be a base driver and a lot of micro-drivers for specific models; it's something I originally uncovered with Epson and Canon inkjet printers; HP is just as *guilty*.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anybody that thinks flying cars were possible are idiots. Everyone would basically need a pilot licence, can you imagine how insane and dangerous that would be, people can barely handle driving on land safely right now.
    • Microsoft Edge 149.0.4022.80 by Razvan Serea Microsoft Edge is a super fast and secure web browser from Microsoft. It works on almost any device, including PCs, iPhones and Androids. It keeps you safe online, protects your privacy, and lets you browse the web quickly. You can even use it on all your devices and keep your browsing history and favorites synced up. Built on the same technology as Chrome, Microsoft Edge has additional built-in features like Startup boost and Sleeping tabs, which boost your browsing experience with world class performance and speed that are optimized to work best with Windows. Microsoft Edge security and privacy features such as Microsoft Defender SmartScreen, Password Monitor, InPrivate search, and Kids Mode help keep you and your loved ones protected and secure online. Microsoft Edge has features to keep both you and your family protected. Enable content filters and access activity reports with your Microsoft Family Safety account and experience a kid-friendly web with Kids Mode. The new Microsoft Edge is now compatible with your favorite extensions, so it’s easy to personalize your browsing experience. Microsoft Edge 149.0.4022.80 changelog: Fixes Fixed an issue that prevented QR code generation from working. Feature updates Intune MAM Protected Downloads. The protected downloads feature for Intune MAM will now save downloaded files to the Documents > Microsoft Edge > Downloads folder in OneDrive. Extensions monitoring in the Edge management service. The Microsoft Edge management service now allows admins to gain visibility into extensions installed across their managed users. From the extensions monitoring page, admins can see which extensions have been installed as well as manage user requests for blocked extensions. For more information, see Microsoft Edge Extensions Monitoring. Validate Edge builds early with enterprise preview. Enterprise preview provides a simpler way for admins to flight pre-release Edge builds to their users. To reduce friction and bolster usage, users will receive pre-release builds directly inside of their Stable Edge application. Admins can allow users to easily opt-out of the preview experience, using built-in rollback to switch between their pre-release and stable channels with ease. Microsoft 365 admin center users can configure the feature, view their flighting population, and receive personalized recommendations all in one place. For more information, see Get started with Enterprise Preview in Microsoft Edge. Download: Microsoft Edge (64-bit) | 193.0 MB (Freeware) Download: Microsoft Edge (32-bit) | 170.0 MB Download: Microsoft Edge (ARM64) | 188.0 MB View: Microsoft Edge Website | Release History Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The machines are starting to fight back any way they can.
    • No news articles about the Arch Linux repo being majorly infected with malware?!?
    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
  • Recent Achievements

    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      599
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      77
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!