Recommended Posts

I have want to connect to a hotmail account with Outlook 2010, but it says it needs Outlook Connector. I tried installing Outlook Connector for Office 2007, but it won't install because Office 2007 needs to be installed. I can't seem to find Outlook Connector for 2010, anyone know where to find it?

Link to comment
https://www.neowin.net/forum/topic/776346-outlook-connector-for-office-2010/
Share on other sites

I have want to connect to a hotmail account with Outlook 2010, but it says it needs Outlook Connector. I tried installing Outlook Connector for Office 2007, but it won't install because Office 2007 needs to be installed. I can't seem to find Outlook Connector for 2010, anyone know where to find it?

I hasn't leaked yet. I don't even know if such thing exists. If you have to access your hotmail, you can use POP3, or go back to Office 2007.

  • 4 weeks later...

Try again... If the Outlook connector 2007 does not work for you then delete the hotmail account in Outlook 2010 and restart all over.

It will ask you automatically to install Outlook connector when you set up a hotmail account. Just hit yes and the system does the rest.

See screenshot of Outlook Connector plugin in Outlook 2010

post-24527-1245326762_thumb.jpg

Try again... If the Outlook connector 2007 does not work for you then delete the hotmail account in Outlook 2010 and restart all over.

It will ask you automatically to install Outlook connector when you set up a hotmail account. Just hit yes and the system does the rest.

See screenshot of Outlook Connector plugin in Outlook 2010

post-24527-1245326762_thumb.jpg

It's not neccessary to install the Outlook Connector in order to add a hotmail account to Outlook 2010. You can just do it by setting up a Pop3 account. Only difference is that it doesn't receive your created folders, only the inbox.

Use the following settings:

- username: your complete emailadres : [email protected]

- password: as usual

- Incoming mail server: pop3.live.com

- Outgoing server: smtp.live.com

Check the box in front of "Require logon using Secure Password Authentication (SPA)"

Then go to "more settings" and the "Advanced" Tab.

- For the incoming Server use port 995

- Check the box in front of the SSL sentence

- as SMTP-port use 587 and with "use the following type of encrypted connection" select "TLS" out of the dropdown menu.

That should do the trick!

It's not neccessary to install the Outlook Connector in order to add a hotmail account to Outlook 2010. You can just do it by setting up a Pop3 account. Only difference is that it doesn't receive your created folders, only the inbox.

Use the following settings:

- username: your complete emailadres : [email protected]

- password: as usual

- Incoming mail server: pop3.live.com

- Outgoing server: smtp.live.com

Check the box in front of "Require logon using Secure Password Authentication (SPA)"

Then go to "more settings" and the "Advanced" Tab.

- For the incoming Server use port 995

- Check the box in front of the SSL sentence

- as SMTP-port use 587 and with "use the following type of encrypted connection" select "TLS" out of the dropdown menu.

That should do the trick!

OH, what can I do if I want to synchronize calendar from Windows Live calendar to outlook?

It's not neccessary to install the Outlook Connector in order to add a hotmail account to Outlook 2010. You can just do it by setting up a Pop3 account. Only difference is that it doesn't receive your created folders, only the inbox.

Use the following settings:

- username: your complete emailadres : [email protected]

- password: as usual

- Incoming mail server: pop3.live.com

- Outgoing server: smtp.live.com

Check the box in front of "Require logon using Secure Password Authentication (SPA)"

Then go to "more settings" and the "Advanced" Tab.

- For the incoming Server use port 995

- Check the box in front of the SSL sentence

- as SMTP-port use 587 and with "use the following type of encrypted connection" select "TLS" out of the dropdown menu.

That should do the trick!

Yeah but he loses all advantages that come with using the Outlook Connector, which basically makes it act like an Exchange account for him. Sure you can setup an Exchange server and just use POP3 to access it, but what would be the point in that?

I made a Live account just to test the Outlook connector and it is definately nice to have.

As to the OP I don't have Office 2010 or I'd check on it myself to see if I could get it working. I'd try Pirla's suggestion if you have not already, it seems to work, but might be spotty to work.

Yeah but he loses all advantages that come with using the Outlook Connector, which basically makes it act like an Exchange account for him. Sure you can setup an Exchange server and just use POP3 to access it, but what would be the point in that?

I made a Live account just to test the Outlook connector and it is definately nice to have.

As to the OP I don't have Office 2010 or I'd check on it myself to see if I could get it working. I'd try Pirla's suggestion if you have not already, it seems to work, but might be spotty to work.

I tried Pirla's suggestion too~~~

It works!!! Thx for Pirla's suggestion!!!

I have want to connect to a hotmail account with Outlook 2010, but it says it needs Outlook Connector. I tried installing Outlook Connector for Office 2007, but it won't install because Office 2007 needs to be installed. I can't seem to find Outlook Connector for 2010, anyone know where to find it?

I've uploaded the file for 32-bit version. Here's the link.

http://rapidshare.com/files/250575388/Outl...nector.exe.html

do you by chance have the 54 bit version? Thanks!

This is the 64-bit version, just uploaded it:

http://rapidshare.com/files/254370989/Outl...nnector_x64.exe

do you by chance have the 54 bit version? Thanks!

This is the 64-bit version, just uploaded it:

http://rapidshare.com/files/254370989/Outl...nnector_x64.exe

ok, installed latest build of office 2010, it works very well but it won't install outlook connector. For some reason it keeps saying you need outlook 2003, 2007 or 2010 but obviously it's already running.

I tried deleting and adding the hotmail-account already, didn't work.

ok, installed latest build of office 2010, it works very well but it won't install outlook connector. For some reason it keeps saying you need outlook 2003, 2007 or 2010 but obviously it's already running.

I tried deleting and adding the hotmail-account already, didn't work.

Yeah. I got the same problem here. x64 Office 2010 with x64 OC 2010 and getting the same error. It wont install.

post-50898-1247537485.png

post-50898-1247537490.png

is that the latest version? I just got accepted into the Tech preview for it and was curious as the OC was updated just a few days ago according to the site.

Try again... If the Outlook connector 2007 does not work for you then delete the hotmail account in Outlook 2010 and restart all over.

It will ask you automatically to install Outlook connector when you set up a hotmail account. Just hit yes and the system does the rest.

See screenshot of Outlook Connector plugin in Outlook 2010

post-24527-1245326762_thumb.jpg

I saw your screen shot showing that you successfully installed Outlook Connector with Outlook 2010. How did you do this?

Every time I try to install Outlook Connector (12.1 64-bit), I get an error message saying that I need to install Outlook 2003, 2007, or 2010.

But I have Office 2010 64-bit installed.

How were you successfull??

OK guys for here goes for those that have had difficulty trying to install this worked for me.

1. Click the Office Orange button.

2. Click Account Settings.

3. Then Click new account.

4. Then fill in details and then click bottom option "Manually Configure server settings ...................

5. Click OK.

6. On the chose server option click the other option and in the menu below it should show "Outlook Connector"

7. Click Next

8. Fill details in click next.

9. Then click send recieve all folders. It will ask for Outlook retart and that is it :)

Not sure why they have hidden it so well as this is the main reason I normally stear away from Outlook and stick with Live but hey ho works for me now :)

  • 10 months later...

It's not neccessary to install the Outlook Connector in order to add a hotmail account to Outlook 2010. You can just do it by setting up a Pop3 account. Only difference is that it doesn't receive your created folders, only the inbox.

Use the following settings:

- username: your complete emailadres : [email protected]

- password: as usual

- Incoming mail server: pop3.live.com

- Outgoing server: smtp.live.com

Check the box in front of "Require logon using Secure Password Authentication (SPA)"

Then go to "more settings" and the "Advanced" Tab.

- For the incoming Server use port 995

- Check the box in front of the SSL sentence

- as SMTP-port use 587 and with "use the following type of encrypted connection" select "TLS" out of the dropdown menu.

That should do the trick!

I upgraded my Office System Pro Plus 2007 (and Outlook Connector v12) to Office Pro Plus 2010 (and Outlook Connector v14), I had 3 hotmail accounts (Passport and Live ID) and at the end of upgrade, my migrated Outlook 2010 with Outlook Connector crashes continously on one of my hotmail accounts, so to use Outlook I had to delete that account (and i was not able to use it)!!

The solution is to use Pirla's (are you Italian?) suggestions and uninstall Outlook Connector.

I needed only a little missing suggestion:

in "other settings..." for the "outgoing mail Server" Tab:

- Check the box in front of "The outgoing server (SMTP) requires authentication" and

- Leave checked the option "Use the same settings as for incoming server"

if you want to be able to send and not only to receive mails.

:rolleyes: For Italian people that have difficulty with Italian versions of Oulook 2010 I wrote here the complete suggestions.

Per gli italiani che hanno difficolt? a seguire le impostazioni degli indirizzi hotmail (@hotmail.com o @hotmail.it) senza bisogno di Outlook Connector riporto l'intera procedura tradotta.

Impostazione manuale di un nuovo account Outlook:

- nomeutente: indirizzo completo mail (ad esempio [email protected])

- password: (quella dell'account di cui sopra)

-Server posta in arrivo: pop3.live.com

-Server posta in uscita (SMTP): smtp.live.com

-spuntare la casella di "Richiedi accesso con authenticazione password di protezione (SPA)"

quindi andare a "Altre impostazioni..." e per la scheda "Server della Posta in uscita":

-Spuntare la casella di "Il server della posta in uscita (SMTP) richiede l'autorizzazione" e

-scegliere "Utilizza le stesse impostazioni del server della posta in arrivo" (scelta predefinita)

poi nella scheda "Impostazioni avanzate":

-usare la porta 995 per il server posta in arrivo (POP3)

-spuntare la casella di "Il server richiede l'autorizzazione crittografata (SSL)"

-usare la porta-SMTP 587 e in "utilizzare il tipo di connessione crittografata seguente" selezionare "TLS" dal menu a tendina.

E tutto funziona per tutti gli account senza pi? crash di Outlook.

Ciao a Tutti

Rinog47

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      596
    2. 2
      +Edouard
      188
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!