Recommended Posts

Does anyone know what kind of changes MSFT did to superfetch? and I need alittle help understand how superfetch really works.. I know superfetch caches your well used programs so they start faster.. But at what point does it re-cache? When i install a new program? Could use alittle information.

Does anyone know what kind of changes MSFT did to superfetch? and I need alittle help understand how superfetch really works.. I know superfetch caches your well used programs so they start faster.. But at what point does it re-cache? When i install a new program? Could use alittle information.

I believe the system just learns you habbits a loads the most common files you used into the memory. When a application starts (lets say an application heavy on memory) it releases the memory to the application. When that application terminates, it then re-caches any commonly used data back into memory. I believe the system does everything automatically and doesn't "reset" itself every time an application gets installed.

I hope this helps.

Superfetch in Windows 7 is also a lot less aggressive than Vista's. On Vista I was often annoyed that it started caching almost immediately after logging in and just had to fill the entire available memory. (Edit - it also cached large files used by applications, like partial torrent downloads - W7 doesn't)

Windows 7 is a bit different - after logging in, I can see some amount of memory is already used for the cache, but the system waits a few minutes before really starting "superfetching". It also doesn't use all the available memory if there's no need to (not enough data to cache). Also, after quitting a program, refilling the cache doesn't occur immediately. It seems that the I/O priority is also lower.

Edited by soulburner
Which is a bad thing how? I mean if you had lets say, 12GB of ram via triple channel DDR3 on a i7 platform would you really have enough programs to have that filled?

Exactly, and if you had a slow hard drive then it would take time to fill that amount of memory up. Free RAM is wasted RAM, but no point in caching RAM with stuff you actually don't need.

FALSE! Superfetch doesn't fetch the users files but only the binaries exe and DLL libraries.

What was loading these files then, making my hard drive cry for help? It wasn't indexing, because this location has not been added to be indexed. If I recall correctly, it was svchost.exe with Background I/O priority.

edit - this guy seems to be complaining about the same thing: http://jaysonrowe.com/2009/01/05/thoughts-...fetch-in-vista/ - read the paragraphs above and below the second screenshot.

Does anyone know what kind of changes MSFT did to superfetch? and I need alittle help understand how superfetch really works.. I know superfetch caches your well used programs so they start faster.. But at what point does it re-cache? When i install a new program? Could use alittle information.

They made it a little less agressive at startup so it doesn't get in the way of a usable desktop. Once the system is idle for a few minutes, then superfetch kicks in and does it's magic.

Free RAM is wasted RAM, but no point in caching RAM with stuff you actually don't need.

:rolleyes: I know this, but with 2GB of RAM, Vista fills up the cache (1500MB for me) in less then 2 min and now all apps starts fast. On Win7 I have 500MB free, unused and wasted RAM. This is bad, not the way Vista does it. I'm now back with Vista, because of the superfetch bug under Win7.

:rolleyes: I know this, but with 2GB of RAM, Vista fills up the cache (1500MB for me) in less then 2 min and now all apps starts fast. On Win7 I have 500MB free, unused and wasted RAM. This is bad, not the way Vista does it. I'm now back with Vista, because of the superfetch bug under Win7.

It's not a bug, like it's been stated in this thread, Superfetch has been changed to reflect better system performance. The more and more applications you run, the more memory it will use. Don't be silly.

it's your poorly written antivirus.

I don't use an AV.

I know what I saw and what my disk went through. It cached utorrent downloads, huge Steam's GCF files and stuff like that. It really does stuff like this: http://jaysonrowe.files.wordpress.com/2009/01/superfetch.png

Windows 7's Superfetch is a huge improvement!

edit:

:rolleyes: I know this, but with 2GB of RAM, Vista fills up the cache (1500MB for me) in less then 2 min and now all apps starts fast. On Win7 I have 500MB free, unused and wasted RAM. This is bad, not the way Vista does it. I'm now back with Vista, because of the superfetch bug under Win7.

You do realize that Vista is caching junk (stuff you will probably never know Windows had) just to keep the Superfetch buffer full?

I don't use an AV.

I know what I saw and what my disk went through. It cached utorrent downloads, huge Steam's GCF files and stuff like that. It really does stuff like this: http://jaysonrowe.files.wordpress.com/2009/01/superfetch.png

Windows 7's Superfetch is a huge improvement!

Exactly, I'd rather have Superfetch cache applications and not every single file I might commonly use.

sorry, superfetch in Win7 makes Win7 slower, NOT faster!

Sorry, but have you given Windows 7 at least a few days to speed up? People complained about Vista and it's very aggressive way of using Superfetch because it cached literally everything. Windows 7 will take a little longer, but after a few reboots/days of using applications, Windows will learn and use Superfetch efficiently. But, if that doesn't work, I'm going to have a guess and say your problem is down to drivers or a bad install.

Yup, Windows 7's "standby" memory will increase when you launch more and more applications. After a fresh install, Superfetch uses a few hundred megabytes. After I installed and used applications like Adobe Photoshop, MSVC 2008 and others, I found the blue bar in Resource Manager covering the whole graph, leaving 0-50MB's truly free - just like Vista tries to do after the very first boot, only this time it's filled with program data that I actualy used.

And all apps I used start up much faster than on XP, which is a sign Superfetch does work just fine.

What was loading these files then, making my hard drive cry for help? It wasn't indexing, because this location has not been added to be indexed. If I recall correctly, it was svchost.exe with Background I/O priority.

aysonrowe.com/2009/01/05/thoughts-...fetch-in-vista/[/url] - read the paragraphs above and below the second screenshot.

That thing making your hard disk 'cry for help' is called a paging file, inevitably on systems with lower amounts of memory, things will get paged more often, and of course the actual fetching of your data into memory.

I don't use an AV.

I know what I saw and what my disk went through. It cached utorrent downloads, huge Steam's GCF files and stuff like that. It really does stuff like this: http://jaysonrowe.files.wordpress.com/2009/01/superfetch.png

Windows 7's Superfetch is a huge improvement!

That graph only shows what file the process is accessing, accessing data doesn't automatically mean it is loaded into memory. For the purpose of proof, I opened a large file with WinRar and extracted it to another folder to show the same effect.

post-286512-1244148011_thumb.jpg

That thing making your hard disk 'cry for help' is called a paging file, inevitably on systems with lower amounts of memory, things will get paged more often, and of course the actual fetching of your data into memory.

I don't think Vista uses the pagefile so intensively after starting up on a 3GB system. Also, when Vista is accessing data from the pagefile, the resource manager will show pagefile.sys under Disk as the file used.

That graph only shows what file the process is accessing, accessing data doesn't automatically mean it is loaded into memory. For the purpose of proof, I opened a large file with WinRar and extracted it to another folder to show the same effect.

Yes, I know, but whenever you see svchost.exe with a Background I/O priority - it's Superfetch.

The Resource Manager under Vista did not use bytes/second units - it used bytes per minute. When I saw "source 2007 materials.gcf" being read there and the "B/min" value was rising and rising and rising, I think it's fair to conclude it's actualy being read from the disk, and it was done so by svchost.exe with background IO - what other purpose of that than "superfetching" it? Oh, and the amount of free memory kept decreasing, so it wasn't just accessing the data, it was reading it into RAM.

Edited by soulburner
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice, hope they *finally* fixed the issue with the NTFS driver where the system would completely brick during large file copies using the built in driver. It's been broken for years requiring me to use the older, slower, NTFS-3G FUSE driver.
    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!