Recommended Posts

Word 2007 takes ~2 seconds to load on my Raid 0 setup without superfetch. As I said long time ago, if you even have good Raid 0 (with standard HDDs) setup Superfetch is useless.

Superfetch is still beneficial, any ways, this topic has served it's purpose, no more Superfetch bashing.

SuperFetch also includes specific scenario support for hibernation, standby, Fast User Switching (FUS), and application launch. When the system hibernates, for example, SuperFetch stores data and code in the hibernation file that it expects (based on previous hibernations) will be accessed during the subsequent resume. In contrast, when you resume Windows XP, previously cached data must be reread from the disk when it is referenced.

http://technet.microsoft.com/en-us/magazin...istakernel.aspx

Word 2007 takes ~2 seconds to load on my Raid 0 setup without superfetch. As I said long time ago, if you even have good Raid 0 (with standard HDDs) setup Superfetch is useless.

Maybe you should measure on a more demanding app than Word... like Softimage, Maya, 3DSMAX, Photoshop, Lightroom, Games....

This thread is mostly opionion (and much of it misinformed) so I skipped reading all of it. Sorry if this was already posted:

Here's a link to the Engineering Windows 7 blog that describes Windows 7 behavior on SSD disks. What's interesting that Windows 7 changes it's behavior depending on the speed of your drive(s). A slow SSD disk will be treated the same as a slow HDD and a fast SSD will be treated the same as a fast hard drive. If a drive is fast enough all the "helpers" (superfetch, etc.) are turned off. It's an assessment of your hard drive's performance.

Support and Q&A for Solid-State Drives

http://blogs.msdn.com/e7/archive/2009/05/0...drives-and.aspx

I would consider this normal behaviour, because the .vdi file needs to be saved by VirtualBox. This disk activity is caused by VirtualBox.

No, because if the file would be saved by VirtualBox you would see virtualbox.exe - not svchost.exe with Background IO priority - and it would be written, not read ;)

Why don't we just delay this discussion until some idiot puts out an tweak-guide where he/her tells us to disable superfetch "because it eats up all your ram" ?

And I bet he/she is going to suggest we should set "number of processors" to 2/4/6/8 whatever we have, so windows ACTUALLY uses them, so then we will have a bonus discussion.

bah :p I'm already getting agitated.

I haven't had any time to run tests or even check stuff out using process explorer, but I use Visual Studio all day and that is a pig of a program, it can slow down the fastest of pc's. My workstation is a dual Xeon 2.4Ghz with 4Gb (out of which I use 3 since I'm still on Win32).

With Win7 7100, I don't see any subjective difference with superfetch on or off. I know VS does a ton of disk Io and the pagefile is frequently being hit, so IMO even after weeks of superfetch being on, its not good enough at predicting disk access and avoiding a cache miss.

  • 1 month later...

Sorry to revive this thread but i caught it on google

Superfetch should be disabled with SSD's since it can cause additional stress on the drives.

SSD's are only worn when using a write I/O. Reading causes no wear on a SSD. Superfetch uses read I/O to cache data into your RAM. It may cause some write but nothing significant.

On another note, Superfetch on Vista really is terrible especially for notebooks. It will eat up your battery because of over using your HD to cache stuff in your RAM. If you have 6gb of RAM, your HD will be thrash about 4-5mins straight trying to fill up your RAM. Yes it will fill your RAM with stuff your going to use but ALOT more of crap your not going to use. Basically not worth that HD/power usage seeing as disabling it makes no difference in performance, HD's these days are fast enough to load a ton of stuff. Also It doesnt just prefetch stuff at startup, it will repopulate every time your memory is free.

If you disable it, you will notice that login time will be faster and more responsive, reverting to an XP style memory management.

I havent tried Windows 7 but i hope they made some adjustments. I also believe unused RAM is wasted ram, but not at the cost of my HD's resources. To be honest i think its just as bad as "ReadyBoost"

Cheers.

Sorry to revive this thread but i caught it on google

SSD's are only worn when using a write I/O. Reading causes no wear on a SSD. Superfetch uses read I/O to cache data into your RAM. It may cause some write but nothing significant.

On another note, Superfetch on Vista really is terrible especially for notebooks. It will eat up your battery because of over using your HD to cache stuff in your RAM. If you have 6gb of RAM, your HD will be thrash about 4-5mins straight trying to fill up your RAM. Yes it will fill your RAM with stuff your going to use but ALOT more of crap your not going to use. Basically not worth that HD/power usage seeing as disabling it makes no difference in performance, HD's these days are fast enough to load a ton of stuff. Also It doesnt just prefetch stuff at startup, it will repopulate every time your memory is free.

If you disable it, you will notice that login time will be faster and more responsive, reverting to an XP style memory management.

I havent tried Windows 7 but i hope they made some adjustments. I also believe unused RAM is wasted ram, but not at the cost of my HD's resources. To be honest i think its just as bad as "ReadyBoost"

Cheers.

Superfetch is disabled when you use a SSD on Windows 7. And Microsoft disabled it for a good reason, not to mention that Superfetch isn't really needed with an SSD.

Sorry to revive this thread but i caught it on google

SSD's are only worn when using a write I/O. Reading causes no wear on a SSD. Superfetch uses read I/O to cache data into your RAM. It may cause some write but nothing significant.

On another note, Superfetch on Vista really is terrible especially for notebooks. It will eat up your battery because of over using your HD to cache stuff in your RAM. If you have 6gb of RAM, your HD will be thrash about 4-5mins straight trying to fill up your RAM. Yes it will fill your RAM with stuff your going to use but ALOT more of crap your not going to use. Basically not worth that HD/power usage seeing as disabling it makes no difference in performance, HD's these days are fast enough to load a ton of stuff. Also It doesnt just prefetch stuff at startup, it will repopulate every time your memory is free.

If you disable it, you will notice that login time will be faster and more responsive, reverting to an XP style memory management.

I havent tried Windows 7 but i hope they made some adjustments. I also believe unused RAM is wasted ram, but not at the cost of my HD's resources. To be honest i think its just as bad as "ReadyBoost"

Cheers.

Login on my pc's with superfetch is just as fast as it is with it off, that's nonsense. And I use sleep mode on my laptop so I open it and superfetch already ahs everything loaded, imagine that!

Login on my pc's with superfetch is just as fast as it is with it off, that's nonsense. And I use sleep mode on my laptop so I open it and superfetch already ahs everything loaded, imagine that!

Are you using Windows Vista or Windows 7? Windows Vista caused boot slowdowns because it was trying to cache everything to the memory while at the same time trying to load up other start up items. Windows 7 doesn't do this and caching only starts when your computer is idle or shortly after the system is fully started up and it only caches only what you need and not everything like in Vista.

Are you using Windows Vista or Windows 7? Windows Vista caused boot slowdowns because it was trying to cache everything to the memory while at the same time trying to load up other start up items. Windows 7 doesn't do this and caching only starts when your computer is idle or shortly after the system is fully started up and it only caches only what you need and not everything like in Vista.

My pc boots in 35 seconds to a usable desktop... with both vista and 7, xp actually booted a bit slower.

And this pc is nothing special, no ub3r fast drives or SSD's.

  • 6 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice, hope they *finally* fixed the issue with the NTFS driver where the system would completely brick during large file copies using the built in driver. It's been broken for years requiring me to use the older, slower, NTFS-3G FUSE driver.
    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!