Tips for fixing a stuck pixel?


Recommended Posts

So I just bought an LCD monitor, and of course it has a stuck pixel. Warranty only covers more then 3 stuck pixels so I'm SOL.

It's stuck on magenta/pink. I've read that there are various tricks to try get them working again. I've read that you can flash colors on the spot, massage it, poke it, press it while the monitor is off then turn the monitor on.

So my question is this, has anybody actually had any success using any of these methods?

I've had horrible luck with my LCD's. My first LCD had 3 stuck pixels, but luckily the store replaced with a perfect screen. My laptop had 1 dead pixel that was in a lower corner. I had an unrelated problem with the screen so they replaced it with a new panel, but the replacement had a dead pixel smack dab in the middle of the screen. Now, I buy this new LCD and it has a really bright pink stuck pixel which is going to be extremely distracting while watching movies.

Link to comment
https://www.neowin.net/forum/topic/782558-tips-for-fixing-a-stuck-pixel/
Share on other sites

So I just bought an LCD monitor, and of course it has a stuck pixel. Warranty only covers more then 3 stuck pixels so I'm SOL.

It's stuck on magenta/pink. I've read that there are various tricks to try get them working again. I've read that you can flash colors on the spot, massage it, poke it, press it while the monitor is off then turn the monitor on.

So my question is this, has anybody actually had any success using any of these methods?

Try getting a permanent marker or something and draw 2 more. Something very permanent.

I've had horrible luck with my LCD's. My first LCD had 3 stuck pixels, but luckily the store replaced with a perfect screen. My laptop had 1 dead pixel that was in a lower corner. I had an unrelated problem with the screen so they replaced it with a new panel, but the replacement had a dead pixel smack dab in the middle of the screen. Now, I buy this new LCD and it has a really bright pink stuck pixel which is going to be extremely distracting while watching movies.

Thats not bad luck, thats you doing something you shouldnt do to LCDs...

I've used the massage method myself. My Intel iMac has one pixel that if you push it carefully, it'll fix itself.

Other screens i've tried this with, didn't work. I've heard of LIMITED success with the color-flash method. Sometimes it'll create more dead pixels (this could be a good thing if you need 2 more?)

You'll need to run this virtually overnight i'm told to get any benefit though (if any).

Good luck mate!

So you're saying I shouldn't buy LCDs? Yeah, thanks for the help :huh:

Exactly.

1st, you are doing something to them that is causing these dead pixels. You RARELY hear anyone having problems with dead pixels anymore. Have you read reviews about the LCDs youve bought?

2nd, CRTs are way better than LCDs (opinion)

Exactly.

1st, you are doing something to them that is causing these dead pixels. You RARELY hear anyone having problems with dead pixels anymore. Have you read reviews about the LCDs youve bought?

2nd, CRTs are way better than LCDs (opinion)

I suggest you research what you're talking about before making a post and looking like a fool. Dead/stuck pixels are a manufacturing defect and are still very common. I didn't do anything to these LCD's, they had dead/stuck pixels from the moment I opened the box.

Yes, CRT's produce better color, but I had some trouble finding a 21.5" 16x9 1080p CRT for under $200 and that wouldn't take up all the space on my desk ;)

I suggest you research what you're talking about before making a post and looking like a fool. Dead/stuck pixels are a manufacturing defect and are still very common. I didn't do anything to these LCD's, they had dead/stuck pixels from the moment I opened the box.

Yes, CRT's produce better color, but I had some trouble finding a 21.5" 16x9 1080p CRT for under $200 and that wouldn't take up all the space on my desk ;)

They CAN be a manufacturing defect. They can also be misuse of the monitor itself.

They are not common at all. They were years ago but now...0.5

Here is a 21":

http://www.accurateit.com/details.asp?iid=774

A bit over 200 but hey.

I've had three LCD's and I've never noticed a dead pixel anywhere.

Exactly :)

They CAN be a manufacturing defect. They can also be misuse of the monitor itself.

They are not common at all. They were years ago but now...0.5

Here is a 21":

http://www.accurateit.com/details.asp?iid=774

A bit over 200 but hey.

Exactly :)

Congratulations, you've found a 20" viewable CRT, that is refurbished, 4:3 and costs $50 more than I paid for my LCD monitor. Again, thanks for your help :|

If you only just got the moitor, take it back.

I bought a monitor from some random IT store, brand new. It had 5 damaged pixles on it, so i took it straight back. The guy was quite rude and said i needed to contact the manafacture. My argument was, i bought it from him only 5 minutes earlier and its his problem. I also threateneed to come back and "take" the monitor(s) of my choice with my friends if he didnt let me swap it for working model.

He agreed then to let me swap it as a "good will gesture"...

buy with American Express. problem solved.

talk to your credit card company: they will side with you

Please remove the flaim bait from your signature. Thanks.

If you only just got the moitor, take it back.

I bought a monitor from some random IT store, brand new. It had 5 damaged pixles on it, so i took it straight back. The guy was quite rude and said i needed to contact the manafacture. My argument was, i bought it from him only 5 minutes earlier and its his problem. I also threateneed to come back and "take" the monitor(s) of my choice with my friends if he didnt let me swap it for working model.

He agreed then to let me swap it as a "good will gesture"...

Please remove the flaim bait from your signature. Thanks.

The problem is I bought it online from NCIX. Apparently they don't consider stuck pixels a defect unless you purchase their extra coverage beforehand.

I've tried all the tricks and none of them worked. Looks like I'll just have to live with it.

For what it is worth, where I used to work, each of my screens had 3 or 4 stuck pixels in bright green. They were Samsung screens and the company I worked for didn't care to RMA them for whatever reason. Anyway, during the normal course of my job which was internet work, browsers, spreadsheets, Word documents, PDF's etc, I only noticed the stuck pixels if I happened to have a black background on my screen for the wallpaper or otherwise a black backgounded web site.

It seemed that since they were so minute (as pixels are), it didn't make a difference.

For a movie experience, you could always play movies in Pink. j/k

Try watching a movie or two and see if that really does make a huge difference for you or not. As for returning the screen, you are on your own there, if the manufacturer only covers 3 or more dead pixels, unless your store is understanding and liberal with their policy, which I am getting the impression that they may not be.

I have also tried the pixel flashing method as well, as hard as I tried, I just couldn't get that tiny flashing pixel to 'infect' the stuck one. Massing didn't work as well as the other techniques.

The problem is I bought it online from NCIX. Apparently they don't consider stuck pixels a defect unless you purchase their extra coverage beforehand.

I've tried all the tricks and none of them worked. Looks like I'll just have to live with it.

Oh, well that would be a bit of a problem then. Not sure what to suggest to be honest.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I use a Linux laptop every day. I have tried to switch to Linux on my gaming PC which has a 5070 ti. It was not a great experience
    • Alien Isolation 2 will bring a new protagonist and setting, watch the reveal trailer here by Pulasthi Ariyasinghe Only a few weeks ago, Sega and Creative Assembly dropped a teaser for a new Alien Isolation. Today at Summer Game Fest, Alien: Isolation 2 was officially announced with a new trailer while also confirming a whole lot of information about the setting of this survival horror project. Check out the reveal trailer above. Leaving behind the Sevastopol space station, the sequel will take players to a remote colony world. With a Xenomorph (or more) on the loose, players will be navigating both the surface of the weather-ravaged planet as well as "the claustrophobic confines of the Weyland-Yutani outpost of Kurosaki Station." Interestingly, Creative Assembly is leaving behind Amanda Ripley, the daughter of Alien's Ellen Ripley, as the protagonist too. While it hasn't confirmed a name yet, players will be taking the role of a new character for this new adventure. The setting is also being described as a new hunting ground for the Alien. This will have players improvising and developing new tools to aid in their survival and escape, all to avoid "cinema’s deadliest killer." "It has been over a decade since we created the original Alien: Isolation and I am so excited to show everyone the first glimpse of the sequel," says Al Hope, Creative Director at Creative Assembly. "Our dedicated Survival team at Creative Assembly has been working hard to create a new, evolved Isolation experience continuing the legacy of the Alien franchise, making the eponymous killer smarter, the environment harsher and the chance of survival slimmer." Promising the same deadly tension from the original from over a decade ago, Alien: Isolation 2 is in development for PC, Xbox Series X|S, Nintendo Switch 2, and PlayStation 5. A release date has not been announced yet.
    • With how far Tim Apple's head has been up Trump's ass, there's no way this was done reluctantly.
    • Like the article stated, it's written completely from scratch, unlike the umpteen Chromium clones. It got its start as the browser built-in to the also written-from-scratch SerenityOS.
    • Hello, From looking at the screen shots in your motherboard's manual at https://endownload.colorful.cn/EnDownload/MotherBroard/2022/Intel 600/Manual/Intel 600 Series BIOS English/Intel 600 Series BIOS User Guide.pdf, you go to the ADVANCED option at the top of the BIOS (UEFI) menu, then select SECURITY in the list of options on the left.  From there  you can enable and set the Secure Boot mode. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      485
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      77
    4. 4
      Steven P.
      68
    5. 5
      +Edouard
      61
  • Tell a friend

    Love Neowin? Tell a friend!