To Upgrade or Not to Upgrade...


Recommended Posts

I am wondering whether upgrading my current PC is worth it for gaming as gaming with the current system specs suck as far as my graphics is concerned. I lag during gameplay.

I was considering upgrading the following parts:

Motherboard

Ram

Graphics

... or would keeping the current CPU, limiting my ability to upgrade the Ram to only DDR2 800 and adding an ATI 4000 series graphics card would defeat my purpose or waste my time and money versus getting a new AMD Dragon system consisting of AMD CPU and Graphics card along with the ability to add DDR3 Ram?

Link to comment
https://www.neowin.net/forum/topic/790668-to-upgrade-or-not-to-upgrade/
Share on other sites

Going by the link to your system setup Q6600 and 3GB of Ram installed what you should be looking to upgrade is:

Graphics card

PSU

New case

Why do you suggest a Graphics upgrade, but no Motherboard upgrade as I would be limited to PCI x16 slot graphics cards which again limits me to at most a GeForce 9 series card up to a 9500 and not any Ram upgrade as wouldn't the current DDR2 667 Ram also be a limiting factor? I understand upgrading to new case as a new card would require more space as a larger graphics card would require a larger PSU, but as I stated above the Graphics card is the upgrade which you suggested I find confusing as to me I am still limited by my initial problem.

I have a 24" monitor capable of 1920x1200 and it would be nice to run games at higher resolutions than what I currently do @ 1280x720 and lower without much lag.

Why do you suggest a Graphics upgrade, but no Motherboard upgrade as I would be limited to PCI x16 slot graphics cards which again limits me to at most a GeForce 9 series card up to a 9500

You think, you know, someone told you....PCI-e 1.x @x16 can run PCI-e 2.0 cards and has more then enough bandwidth to run cards like HD 4890 or GTX 275.

...and not any Ram upgrade as wouldn't the current DDR2 667 Ram also be a limiting factor?

You think it would but really...No.

I have a 24" monitor capable of 1920x1200 and it would be nice to run games at higher resolutions than what I currently do @ 1280x720 and lower without much lag.

Your GeForce 8400GS has a lot to do with that (exaggerating by a lot... its way worse).

They are backward compatible. A friend of mine is running a 9600 gts which is pci-e 2.0 on a pci-e 1.0 motherboard.

As for suggesting a card for you we'd need to know your budget.

If you have the cash go for a gtx 295. If not a gtx 260 or 275 are solid performers. I dont know anything about ATI cards so I can't suggest any.

I've got a GTX 260 running on a PCI-E 1.x motherboard, and I can play L4D and CODWAW at 1920x1080 on a 22" HD monitor with their settings way jacked up and still get a good frame rate. Newegg had a sale a few days ago, you might want to wait if you're on a budget.

If you're in the market for a used 8800GT.. then I've got one for ya!

Oh and when you do make a graphics card purchase, make sure you've got a good enough power supply. The GTX 260 takes up 36A on a 12V rail. 8800GT takes up 22A I believe.

You think, you know, someone told you....PCI-e 1.x @x16 can run PCI-e 2.0 cards and has more then enough bandwidth to run cards like HD 4890 or GTX 275.

You think it would but really...No.

Your GeForce 8400GS has a lot to do with that (exaggerating by a lot... its way worse).

PeterUK I was unaware of this as I thought PCIe 2.0 could not run in a PCIe 1.x slot. No one told me this it was just something I thought wasn't capable.

As for the rest of the replies thank you for your suggestions and clearing/backing what PeterUK said.

If I am going to upgrade my graphics I am debating whether to go with something cheap, but still pack a punch like the ATI Radeon HD 4770 as the direct X 11 cards will be out before the new year arrives only a few short months from now. The other reason I'm liking the 4770 from ATI is its 40nm process and running cool and not a power hog.

I've watched youtube videos where people are showing off their 4770 running usually with 4gigs of ram usually DDR3 and on an AMD x3/4 and the framerates/gameplay seem real smooth and nice.

How would my setup compare with the addition of such a graphics change as compared to an AMD x3/4 and 3-4gigs of DDR3?

They are backward compatible. A friend of mine is running a 9600 gts which is pci-e 2.0 on a pci-e 1.0 motherboard.

As for suggesting a card for you we'd need to know your budget.

If you have the cash go for a gtx 295. If not a gtx 260 or 275 are solid performers. I dont know anything about ATI cards so I can't suggest any.

What he said ^ ^ ^

I think for 1920x1200 resolution, the GTX 275 or equivalent ATI card are great solutions for a medium budget. If you have the cash go with the GTX 295; you won't be disappointed.

But for these graphics cards you will need to move away from the m9040n tower case and transplant the motherboard into a new case with a new PSU; at least 600 Watts I would say; (750 watts ideal).

Also your board is an ASUS IPIBL-LA (decent board); it supports DDR2 800. RAM is pretty cheap, so 4 GB DDR2 800 would be good to get as well; even though if your running 32Bit OS you'll only see around 3.0 GB to (maybe) ~ 3.75 GB.

How would my setup compare with the addition of such a graphics change as compared to an AMD x3/4 and 3-4gigs of DDR3?

If anything your Q6600 & 3GB of Ram is being limited to your current graphics card a HD 4890 or GTX 275 would give it a overall balance.

You get more speed with a faster CPU then RAM but if you wanted to do that get a better Motherboard + DDR2 800 and overclock your CPU.

DDR3 is nice but I wouldn't die over it unless the CPU only supports DDR3 (like i7).

I don't see the point at this time to upgrade my graphics to any of the $200+ cards when direct X 11 is going to be here before the new year.

Wouldn't just upgrading my PSU to something more future-proof like a Corsair 750W and an ATI 4770 for the time being be fine or am I still bottle-necking my CPU?

Can these two upgrades be done without a case upgrade as the ATI 4770 doesn't look much larger than my current 8400GS?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      209
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!