Xbox 360 now supports x264?


Recommended Posts

So I stumbled across something just now by accident. I used Windows 7 Media Center to share all of my video files on my Homegroup. After that, I setup Media Center to scan these folders and share them across the network. With this setup, I then went and added a Media Center Extender and input the 360's unique number.

I was watching some shows and saw an x264 file and said "**** it, worth a shot." To my amazement, the 360 started streaming it in HD and I watched it. I've tested other x264 files and they are working as well. :)

Now as far as I knew, the xbox 360 only supported h264. If anyone is on Windows 7 RTM, has a 360 and some HD x264 files, could you test and confirm?

These are MKV/x264 files.

Edited by Unrealistic
Link to comment
https://www.neowin.net/forum/topic/802950-xbox-360-now-supports-x264/
Share on other sites

x264 is a library for encoding h264. H.264 is the video codec/video format, x264 is a program to encode H.264 video format.

Basically, x264 is not a codec, h264 is the codec that is needed to support HD.

From Wiki itself

x264 is a free software library for encoding video streams into the H.264/MPEG-4 AVC format

The 360 has support for H264, I dunno about AVC, don't think it does that.

It doesn't support the mkv container though making it goddamn useless to me.

MKV is just a container, I don't know how many times on this board I've had to tell people it's codec support that matters not container :p Containers can be remuxed.

Right, but before today I have never been able to stream x264 files. It would say "unsupported codec".

Viper: I am streaming .MKV files. At least now I am with Windows 7 RTM MCE.

That's because Windows 7 actually knows how to stream to the 360.

The only limits I know are video bitrate

- H.264 video support: Up to 15 Mbps, Baseline, Main, and High (up to level 4.1) Profiles with 2 channel AAC LC and Main Profiles.

- Added MPEG-4 Part 2 video support: Up to 8 Mbps, Simple Profile with 2 channel AAC LC and Main Profiles.

And the 360 won't do 5.1 sound when streaming H264, at least not AC3 or DTS, only that WMA audio codec in 5.1. It will downmix AC3 5.1 to 2.0.

I will have to test that, because I could have sworn it was in AC3 5.1. Too lazy to test it atm though.

Just thought it was interesting though because before today I've never been able to play these files. I'd like to see if other people can confirm this though, because if it is not working for them, then I know what I installed to allow them to play.

MKV is just a container, I don't know how many times on this board I've had to tell people it's codec support that matters not container :p Containers can be remuxed.

That's because Windows 7 actually knows how to stream to the 360.

The only limits I know are video bitrate

And the 360 won't do 5.1 sound when streaming H264, at least not AC3 or DTS, only that WMV audio codec in 5.1. It will downmix AC3 5.1 to 2.0.

Did you not notice my post said "mkv CONTAINER" lol I am very (obviously) aware of the difference.

And even when I have files that are .mp4 or use software to put it into and mkv4 container it doesn't play at all on my xbox unless I stream it which is odd (for example playing off a usb doesn't work for h.264 at all) I have had some luck using xenonmkv to make it into a .mp4 and streaming with tversity though.

The h.264 support is really shoddy in general, for example it the xbox cant play h.264 files larger than 4 gigs, and can ONLY use 2 channel aac audio.

@Unrealistic what are you using to stream .mkv? tversity works but it tries to transcode it for some reason.

I will have to test that, because I could have sworn it was in AC3 5.1. Too lazy to test it atm though.

Just thought it was interesting though because before today I've never been able to play these files.

You should of asked for help before hand, I could've got you setup for streaming before now :p It's just Windows Vista wasn't made in mind for streaming HD content, you had to use 3rd party software.

It doesn't support the mkv container though making it goddamn useless to me.

Divx has a tech preview driver that gives access to mkv files for streaming. the only catch is you have to be using the 32bit win 7 as 64bit is not yet supported. I'v been using it since the Win 7 RC works pretty good. The only probles I have is 1080p is touch and go but it more than likely is my pc as its an old athlon 64 3500+ system.

Edit: Streaming through MC not through Dashboard

Did you not notice my post said "mkv CONTAINER" lol I am very (obviously) aware of the difference.

And even when I have files that are .mp4 or use software to put it into and mkv4 container it doesn't play at all on my xbox unless I stream it which is odd (for example playing off a usb doesn't work for h.264 at all) I have had some luck using xenonmkv to make it into a .mp4 and streaming with tversity though.

The h.264 support is really shoddy in general, for example it the xbox cant play h.264 files larger than 4 gigs, and can ONLY use 2 channel aac audio.

Well put it this way, MKV container support wouldn't really change anything.

The same limitations would be in place, as those limitations are due to codec & hardware support/compatibility, not container support.

Viper, can you test this? I was streaming a 6.56GB 720p x264 movie in mkv container. I'm just using the Media Center Extender to stream, no 3rd party software.

@Audioboxer, I didn't want to use TVersity or any other conversion software, even though my computer can clearly handle doing it. I'm odd with converting formats, even if they are mathematically similar.

Media center doesn't even recognize mkv files for me.

with the tech preview driver it will enable it give me acouple seconds and i will try to find the page for it

Viper, can you test this? I was streaming a 6.56GB 720p x264 movie in mkv container. I'm just using the Media Center Extender to stream, no 3rd party software.

@Audioboxer, I didn't want to use TVersity or any other conversion software, even though my computer can clearly handle doing it. I'm odd with converting formats, even if they are mathematically similar.

720p content shouldn't need converting/transcoding, just remuxing. It's 1080p content you'll have headaches with on a 360 for two reasons

- H.264 video support: Up to 15 Mbps, Baseline, Main, and High (up to level 4.1) Profiles with 2 channel AAC LC and Main Profiles.

- Added MPEG-4 Part 2 video support: Up to 8 Mbps, Simple Profile with 2 channel AAC LC and Main Profiles.

Some 1080p content exceeds those bitrates, AVC which is the second line is uncompressed so off a Blu Ray it will be 25-40Mbps. H264 encodes are typically around 10-15Mbps, but some go higher. 720p encodes won't exceed such rates.

Secondly many rips of films on the internet were done in profile 5.1 (scenesters fault, there was no reason to rip in 5.1, they were just uneducated about hardware support), this is a hardware limitation, the PS3 only does up to profile 4.1 as well, so those encodes need to be transcoded.

The Media Center Extender IIRC will transcode any content that needs to be, Windows 7 ships with the H264 codec so it can encode. This is the reason streaming from Windows 7 works out of the box, and Windows Vista didn't.

Yeah I can play mkv files by using a decent program called xenonmkv which simply transcodes the audio to 2 channel (no video transcoding) and puts it into the mp4 container, but the files it produces work perfectly streaming but not off of my usb drive.

The xbox likes to be really random though, I've had it refuse to play xvid files and I tried the same file 3 more times and it played. Its so goddamn touchy.

@ Unrealistic

If you have the MKV spitter installed it will work on the pc. if you install the divx it will allow streaming to the xbox as well. My son is watching Cars in 720p as we speak. lol

@ Viper

Thats the only problem. I had it MKV support under x64 but to get it working was way to much work and it was really hit and miss on steaming to the xbox. I ended up switching to 32bit and now it works perfectly.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      73
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!