Xbox 360 now supports x264?


Recommended Posts

So I stumbled across something just now by accident. I used Windows 7 Media Center to share all of my video files on my Homegroup. After that, I setup Media Center to scan these folders and share them across the network. With this setup, I then went and added a Media Center Extender and input the 360's unique number.

I was watching some shows and saw an x264 file and said "**** it, worth a shot." To my amazement, the 360 started streaming it in HD and I watched it. I've tested other x264 files and they are working as well. :)

Now as far as I knew, the xbox 360 only supported h264. If anyone is on Windows 7 RTM, has a 360 and some HD x264 files, could you test and confirm?

These are MKV/x264 files.

Edited by Unrealistic
Link to comment
https://www.neowin.net/forum/topic/802950-xbox-360-now-supports-x264/
Share on other sites

x264 is a library for encoding h264. H.264 is the video codec/video format, x264 is a program to encode H.264 video format.

Basically, x264 is not a codec, h264 is the codec that is needed to support HD.

From Wiki itself

x264 is a free software library for encoding video streams into the H.264/MPEG-4 AVC format

The 360 has support for H264, I dunno about AVC, don't think it does that.

It doesn't support the mkv container though making it goddamn useless to me.

MKV is just a container, I don't know how many times on this board I've had to tell people it's codec support that matters not container :p Containers can be remuxed.

Right, but before today I have never been able to stream x264 files. It would say "unsupported codec".

Viper: I am streaming .MKV files. At least now I am with Windows 7 RTM MCE.

That's because Windows 7 actually knows how to stream to the 360.

The only limits I know are video bitrate

- H.264 video support: Up to 15 Mbps, Baseline, Main, and High (up to level 4.1) Profiles with 2 channel AAC LC and Main Profiles.

- Added MPEG-4 Part 2 video support: Up to 8 Mbps, Simple Profile with 2 channel AAC LC and Main Profiles.

And the 360 won't do 5.1 sound when streaming H264, at least not AC3 or DTS, only that WMA audio codec in 5.1. It will downmix AC3 5.1 to 2.0.

I will have to test that, because I could have sworn it was in AC3 5.1. Too lazy to test it atm though.

Just thought it was interesting though because before today I've never been able to play these files. I'd like to see if other people can confirm this though, because if it is not working for them, then I know what I installed to allow them to play.

MKV is just a container, I don't know how many times on this board I've had to tell people it's codec support that matters not container :p Containers can be remuxed.

That's because Windows 7 actually knows how to stream to the 360.

The only limits I know are video bitrate

And the 360 won't do 5.1 sound when streaming H264, at least not AC3 or DTS, only that WMV audio codec in 5.1. It will downmix AC3 5.1 to 2.0.

Did you not notice my post said "mkv CONTAINER" lol I am very (obviously) aware of the difference.

And even when I have files that are .mp4 or use software to put it into and mkv4 container it doesn't play at all on my xbox unless I stream it which is odd (for example playing off a usb doesn't work for h.264 at all) I have had some luck using xenonmkv to make it into a .mp4 and streaming with tversity though.

The h.264 support is really shoddy in general, for example it the xbox cant play h.264 files larger than 4 gigs, and can ONLY use 2 channel aac audio.

@Unrealistic what are you using to stream .mkv? tversity works but it tries to transcode it for some reason.

I will have to test that, because I could have sworn it was in AC3 5.1. Too lazy to test it atm though.

Just thought it was interesting though because before today I've never been able to play these files.

You should of asked for help before hand, I could've got you setup for streaming before now :p It's just Windows Vista wasn't made in mind for streaming HD content, you had to use 3rd party software.

It doesn't support the mkv container though making it goddamn useless to me.

Divx has a tech preview driver that gives access to mkv files for streaming. the only catch is you have to be using the 32bit win 7 as 64bit is not yet supported. I'v been using it since the Win 7 RC works pretty good. The only probles I have is 1080p is touch and go but it more than likely is my pc as its an old athlon 64 3500+ system.

Edit: Streaming through MC not through Dashboard

Did you not notice my post said "mkv CONTAINER" lol I am very (obviously) aware of the difference.

And even when I have files that are .mp4 or use software to put it into and mkv4 container it doesn't play at all on my xbox unless I stream it which is odd (for example playing off a usb doesn't work for h.264 at all) I have had some luck using xenonmkv to make it into a .mp4 and streaming with tversity though.

The h.264 support is really shoddy in general, for example it the xbox cant play h.264 files larger than 4 gigs, and can ONLY use 2 channel aac audio.

Well put it this way, MKV container support wouldn't really change anything.

The same limitations would be in place, as those limitations are due to codec & hardware support/compatibility, not container support.

Viper, can you test this? I was streaming a 6.56GB 720p x264 movie in mkv container. I'm just using the Media Center Extender to stream, no 3rd party software.

@Audioboxer, I didn't want to use TVersity or any other conversion software, even though my computer can clearly handle doing it. I'm odd with converting formats, even if they are mathematically similar.

Media center doesn't even recognize mkv files for me.

with the tech preview driver it will enable it give me acouple seconds and i will try to find the page for it

Viper, can you test this? I was streaming a 6.56GB 720p x264 movie in mkv container. I'm just using the Media Center Extender to stream, no 3rd party software.

@Audioboxer, I didn't want to use TVersity or any other conversion software, even though my computer can clearly handle doing it. I'm odd with converting formats, even if they are mathematically similar.

720p content shouldn't need converting/transcoding, just remuxing. It's 1080p content you'll have headaches with on a 360 for two reasons

- H.264 video support: Up to 15 Mbps, Baseline, Main, and High (up to level 4.1) Profiles with 2 channel AAC LC and Main Profiles.

- Added MPEG-4 Part 2 video support: Up to 8 Mbps, Simple Profile with 2 channel AAC LC and Main Profiles.

Some 1080p content exceeds those bitrates, AVC which is the second line is uncompressed so off a Blu Ray it will be 25-40Mbps. H264 encodes are typically around 10-15Mbps, but some go higher. 720p encodes won't exceed such rates.

Secondly many rips of films on the internet were done in profile 5.1 (scenesters fault, there was no reason to rip in 5.1, they were just uneducated about hardware support), this is a hardware limitation, the PS3 only does up to profile 4.1 as well, so those encodes need to be transcoded.

The Media Center Extender IIRC will transcode any content that needs to be, Windows 7 ships with the H264 codec so it can encode. This is the reason streaming from Windows 7 works out of the box, and Windows Vista didn't.

Yeah I can play mkv files by using a decent program called xenonmkv which simply transcodes the audio to 2 channel (no video transcoding) and puts it into the mp4 container, but the files it produces work perfectly streaming but not off of my usb drive.

The xbox likes to be really random though, I've had it refuse to play xvid files and I tried the same file 3 more times and it played. Its so goddamn touchy.

@ Unrealistic

If you have the MKV spitter installed it will work on the pc. if you install the divx it will allow streaming to the xbox as well. My son is watching Cars in 720p as we speak. lol

@ Viper

Thats the only problem. I had it MKV support under x64 but to get it working was way to much work and it was really hit and miss on steaming to the xbox. I ended up switching to 32bit and now it works perfectly.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
    • Mp3tag 3.35 by Razvan Serea Mp3tag is a powerful and yet easy-to-use tool to edit metadata (ID3, Vorbis Comments and APE) of common audio formats. It can rename files based on the tag information, replace characters or words from tags and filenames, import/export tag information, create playlists and more. The program supports online freedb database lookups for selected files, allowing you to automatically gather proper tag information for select files or CDs. Mp3tag supports the following audio formats: Advanced Audio Coding (aac) Free Lossless Audio Codec (flac) Monkeys Audio (ape) Mpeg Layer 3 (mp3) MPEG-4 (mp4 / m4a / m4b / iTunes compatible) Musepack (mpc) Ogg Vorbis (ogg) OptimFROG (ofr) OptimFROG DualStream (ofs) Speex (spx) Toms Audio Kompressor (tak) True Audio (tta) Windows Media Audio (wma) WavPack (wv) Mp3tag 3.35 changelog: This version introduces a new Files options page, enhanced toolbar customization, support for RF64 WAV files, improved Discogs and MusicBrainz tag sources, and many other improvements and fixes. See the Release Notes for more details. Download: Mp3tag 64-bit | 5.7 MB (Freeware) Download: Mp3tag 32-bit | 5.2 MB Link: Mp3tag Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The FIFA World Cup is not US centric.
    • It’s amusing how Microsoft is pushing IT admins as if this was a major, game-changing update. In reality, it’s just an enablement package that bumps the build number, which is disappointing compared to the more substantial 22H2 and 24H2 releases. Technically, 25H2, 26H1, and the upcoming 26H2 are essentially the same, differing only in support schedules. They could have included the Windows K2 improvements here, but chose not to. The era of Windows being in the backburner continues, and this 26H2 release feels like an afterthought. Shame, Nadella, shame.
    • Microsoft, totally not confusing /s 25H2 - Current for non-Arm based Windows 26H1 - Current for Arm based Windows 26H2 - Only for non Arm Windows
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!