[Official] Call of Duty: Modern Warfare 2


Recommended Posts

Depends what you are looking for, "balanced oh we're having fun" matches makes me wanna puke - I want to be pitted against some hardcore mofos with 100 hours more experience than me - It's the best way to learn the games and get better. Then you also get pitted against people with no sense of anything, then you can annihilate them <3

The harrier is a massive pain in the arse, it's just way too overpowered. I swear it always hits me when I'm indoors too. Perhaps I just need to give the game some more time (and get better), but it doesn't feel as balanced or fun online as MW at the moment.

Depends what you are looking for, "balanced oh we're having fun" matches makes me wanna puke - I want to be pitted against some hardcore mofos with 100 hours more experience than me - It's the best way to learn the games and get better. Then you also get pitted against people with no sense of anything, then you can annihilate them <3

It's a team game, balanced matches work better for team play. Unless you want round overs within minutes.

Unless you're playing solo or plain deathmatch, you can't win a game for your team on your own (all that often).

I have no idea what game modes you're playing, but the bomb detonation modes or holding the flags are not that fun when it's a team of noobs vs seasoned players. I can't say the matchmaking always arses up, just sometimes.

Guess it's different tastes in fun for us, I don't enjoy it when your team can't do jack, nor do I enjoy it when the opposition can't do jack. I always enjoy a well fought/close battle. That's more fun for me, I don't really care about scoreboards or pwning people :p

The harrier is a massive pain in the arse, it's just way too overpowered. I swear it always hits me when I'm indoors too. Perhaps I just need to give the game some more time (and get better), but it doesn't feel as balanced or fun online as MW at the moment.

The harrier does indeed suck on certain maps. Too much "aimbot" in it, it spots you when you're out in the open for a mere second between cover and basically 1 hit kills you :p

Those with lots of cover/levels it's not as bad.

I'm playing Hardcore TDM and S&D - Both modes are extremely easy to dominate as a single player and it's possibly to turn the tide easily. Yes, it's a game featuring possible great team work but like any other game out there, teamwork is an unknown factor on public servers, it rarely ever happens - So might as well get used to playing lone wolf from the start and keep the teamwork to where it belongs, in parties with mates, not randoms.

I'm playing Hardcore TDM and S&D - Both modes are extremely easy to dominate as a single player and it's possibly to turn the tide easily. Yes, it's a game featuring possible great team work but like any other game out there, teamwork is an unknown factor on public servers, it rarely ever happens - So might as well get used to playing lone wolf from the start and keep the teamwork to where it belongs, in parties with mates, not randoms.

Are they the 'one hit' kill modes?

Something more like counterstrike would probably be better for me in MW2.

In broad strokes, yes and without a HUD and all this shabang. I hate this crap about having to empty half a clip into people - Hardcore matches are slowed down significantly, you rarely see people rushing around like CS kids in hardcore matches. ( I don't at least ) So it's a lot more tactical this mode and frustrating if you aren't very good at the game :p

I'm looking forward to playing some hardcore MW2. It was always my favourite way to play MW. Need to rank up and unlock all the game modes first though. I'm only level 15 at the moment. Admittedly I've not been putting in the hours though.

:cool:

Just had my best game - 19k, 3d and I also managed to get my highest score in one game 6.5k XP.

I also got to fly the AC130...until someone killed me :angry:

Surely you stay in the AC130 and just get respawned after it ends? That's what happens with Chopper Gunner anyways.

Surely you stay in the AC130 and just get respawned after it ends? That's what happens with Chopper Gunner anyways.

Nope, you go prone and open your lappy. I didn't choose that great a hiding spot, tbf - hid behind a pickup behind a water-pump warehouse in Underpass :p

Someone lobbed a grenade and blew up the pickup and me :(

Nope, you go prone and open your lappy. I didn't choose that great a hiding spot, tbf - hid behind a pickup behind a water-pump warehouse in Underpass :p

Someone lobbed a grenade and blew up the pickup and me :(

No that's not what I mean, I know you open the laptop. If you die whilst in the AC130 do you stay in, yet when you go out you are back in a spawn zone or something.

Nope, the default is perfect for me. I think the more you play around with those settings, the longer you're ultimately going to be fighting with the game and controlling. Whereas if you just stick with settings you'll get better at them with practise.

That said, some FPS' really have slow turning, so it's necessary sometimes. Strangely MW2 was just perfect for me.

Ok any tips on how to NOT suck at FPS on Console :p question about sensitivity, has anyone changed their sensitivity.

Ya. You can go in and choose custom. I play on 6 atm which is higher than default setting of high. You can all the way up to 10, which should be near keyboard/mouse IMO. Hope you have better luck at it than I. I kept over moving and missing dudes rather than quickly killing 'em.

No it doesn't, you just suck with it :p Loads of people are using Cold Blooded so they don't even show up on Thermal - ACOG gives you a clear, unobstructed view of everything around you and I've never had that many problems spotting enemies. Plus, certain areas light up like Christmas trees in Thermal, allowing snipers to hide in there - So I'll rely on my own eyes to pick out the target.

out the target.

ACOG + .50 + Silencer is a mean combo, deadly at range, deadly close-up :cool:

I read your other posts and saw you said you play Hardcore only. If that's the case I'll stop talking. I haven't played Hardcore yet and don't plan on it till I have better unlocks. I'm assuming like in COD4, Hardcore is a different game so different things may work there. I just know playing in regular TDX (Team Deathmatch Express) that Acog is horrible. I have no problems spotting people in and out of thermal, but thermal just makes it so ridiculously easy, it's funnay.

I hear what you say 100%. You know how I was with the original MW and this just feels different. In my last big post in this thread I talked a lot about the great balancing they have done and how I just can't go off and have 6+ games in a row where I do phenomenal.

After reading your approach, I realize some of that is my play style hasn't fully switched over yet. No matter what people say, with the original MW, you could run and gun ALL THE TIME. I tried to do that for my first 20 matches or so with MW2 and couldn't figure out why I was doing so poorly. Now I know that it is just how the game has changed. With everything being more balanced, you can't count on running straight at an enemy base expecting to mow down people left and right.

I'm starting to get better and playing a little bit "slower" but I still digress. You can still rountinely find me starting a match going 0 kills and 4 deaths or 1 kill and 5 deaths before remembering to take a deep breath and "cool it" :p . I always end up turning the match around and staying well above positive, but it just goes to show that although MW2 seems just the same to many people, it is a whole new ballgame in terms of play style for many people.

Audio: About the harrier, does anybody you play with shoot it down? Unlike the last game, you get a ton of points for shooting down the harriers, choppers, etc. Grab a rocket launcher or stinger and fire away. On another point, that is weird that you are getting teamed up with so many high levels that often. What game types are you playing? Maybe it is just different on the 360 with more people playing which probably averages out to a lower level in the mean time at least.

(Y) Good to hear someone relates to what I was saying, especially you as I know you know your stuff.

Today I literally had my best day yet, went 20-2, 16-5 and 14-5 in that order, and was top score in all 3 matches, team deathmatch and my team always won.

Then I decide why not try out the Red Dot site, and I went 1-16. Absolutely awful and I removed it immediately after that match. I am much better with just the iron sites. I guess I will just not be unlocking those challenges from using the red dot. But was really happy by the fact I had a few consistent rounds. My K/D ratio was at .54 when I started and in just about 4 or 5 rounds I got it to .78 (was .80 before that 1-16 round). So slowly getting better thanks to not freaking out as much is the easiest way to put it. LOL

@ SMELTN. Really just takes practice man, but I promise one day (and that day should be fairly soon) you will just get it. Practice that right stick as much as possible. And actually I usually go ahead and play with the controller settings a bit, but the default on MW2 feel literally perfect to me, I did not even bring the menu up.

And I had and still do not have a single clue what I was supposed to do in the musuem, and I searched everywhere. So where is this stupid button I missed? :laugh:

I dunno how people keep such low death scores.

I seem to be dead more than I'm alive :laugh: I'm not a bad player (can I find my overall stats anywhere?) I just seem to have absolutely horrible luck. Always seem to turn the wrong corner, turn my back at the wrong second, be the 1 guy picked off out the group of 3, etc etc :laugh:

Sucks :(

I guess a good bit of it is still to do with learning the maps, seeing as I'm probably screwing up around camping hotspots or losing out to enemies taking shortcuts.

Is there a recoil perk or something? Sometimes in death cam it seems like the enemy player who's killed me literally has absolutely no recoil. That's even on some of the large machine guns at times.

What's some recommended setups for someone at level 20? I've been going with a silencer for a few levels now.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      226
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!