Recommended Posts

I'd noticed a number of people in various forums saying that the Windows 7 Photo Viewer was slow to display images (compared to Vista and XP). I too found that performance, especially when manually flicking though a folder full of photos, was poorer than one might expect.

It turns out that the problem (for me at least) was caused by using the "Calibrate Color" applet built in to Windows 7. It generates a custom ICC profile and sets it as the default for the display. Once the custom profile is created and applied Windows Photo Viewer slows to a crawl. Delete the profile and performance is restored to normal.

Not exactly a major problem since most display drivers have their own controls for display calibration but I thought it worth mentioning in case the slow photo viewer is bothering others as it did me.

Just to be clear, if you haven't used the Calibrate Color applet and saved a new profile then as far as I know you won't encounter this problem.

A minor issue but one I hope is addressed in due course.

P.S. I use an ATI Radeon HD 4870. It did occur to me that the issue might only affect certain graphics cards. Anyone with nVidia hardware experiencing the same problem after running Color Calibration?

Link to comment
https://www.neowin.net/forum/topic/808104-color-calibration-issue-in-windows-7/
Share on other sites

Just one more thing...

For those who can't tell any difference in Windows Photo Viewer performance with and without Color Calibration, try running the photo viewer windowed and using the left cursor key to flick backwards through a folder of photos. That's where the performance difference is most evident.

Information here is spot on, I was annoyed with the picture viewer performance, so much so I had to install Irfanview. I deleted the profile generated by the Color Calibration tool and picture viewer opened pics instantly.

Thanks for the feedback. May I ask what graphics card you're using? It would be helpful to know for sure if this problem is in any way influenced by graphics hardware.

I'm using a NVIDIA 8800GT (512mb) with 190.38 Win 7 drivers (x64).

Since I'm using a Radeon HD 4870 that points to it being a probable bug in Windows 7 rather than a driver issue.

Talking of bugs, anyone noticed another annoying one where icons for Removable Storage Devices (DVD-RW, etc) don't always refresh in the Computer window? I often have to eject my drives twice to get it to refresh.

Oh well, roll on SP1. :rolleyes:

Maybe this is a topic for another thread but I wonder how many of you favour Microsoft perfecting Windows 7 before even starting work on Windows 8?

Maybe it's middle age catching up with me but I wish we could get off the "new is best" merry-go-round and actually concentrate instead on making things (software and hardware) that work perfectly before they become obsolete! :(

  • 2 weeks later...

So that's what's causing it! I'm encountering the same problem, using Intel GMA 4500MHD. This is definitely a bug in Windows 7, unless all three hardware manufacturers are equally incompetent.

On a somewhat related matter, is anyone else having an issue where your color profile is not loaded after rebooting/resuming your system?

Every time, the stock color profile loads up. I go to the Color Management settings, and my custom profile is still selected. I have to select the stock profile and then my profile again in order to make it load up. After every boot.

It also happened in windows vista. Wait, maybe not, that was another bug. But I remember having a custom color profile caused photo viewer to go all iffy even if the rest of the windows looked okay. Same when you have 'enhacements' on in your sound options, windows media player profile is affected.

just wanted to tell how I stopped losing the gamma when I restart the computer.

I learned from this blog to uncheck igfxpers.exe from the autorun. (Start > Run... > msconfig > Startup)

http://neosmart.net/blog/2007/windows-vist...amma-table-bug/

Intel GMA 4500HMD (Drivers - 15.15.0.64.1808 6/5/2009)

Windows 7x64 (RC1)

just wanted to tell how I stopped losing the gamma when I restart the computer.

I learned from this blog to uncheck igfxpers.exe from the autorun. (Start > Run... > msconfig > Startup)

http://neosmart.net/blog/2007/windows-vist...amma-table-bug/

Intel GMA 4500HMD (Drivers - 15.15.0.64.1808 6/5/2009)

Windows 7x64 (RC1)

Can someone tell me where to find the files you're talking about deleting?

There's probably a quicker method but here's how I do it...

Go to Display Settings (where you change screen resolution, etc) and click on Advanced Settings. From there open up Color Management, click on the Advanced Tab and then Change System Defaults. In the windows that appears delete any entries that start with the filename CalibratedDisplayProfile. Close all open windows and try Photo Viewer again. It should be much quicker.

Great ... unless you use calibration for a reason ... I'm a designer and I have used calibration to match my screen to the best possible color I can.

Me too and I'm reluctantly putting up with the slow Photo Viewer so I can keep my custom calibration. Fingers crossed it gets fixed before SP1.

  • 1 month later...

RTM still has the problem - bummer I just discovered this feature. I can't replicate the functionality with nVidia control panel, I'm amazed at how much detail I've been missing from having an over "bright" or "gamma" laptop display. I toned gamma down all the way. Settings won't stick after a reboot, I have to manually re-apply the profile.

Great ... unless you use calibration for a reason ... I'm a designer and I have used calibration to match my screen to the best possible color I can.

I hope you don't rely on Windows 7 calibration as the standard. I have a hardware-calibrated monitor; it's the only real thing for any designer or photographer, like me.

Install the WAVE 2 version of Windows Live Photo Gallery on Windows 7 (the one that looks like the Vista versions and has toolbar icons) and there won't be any slowdowns. Note that only Wave 3 is currently offered by Microsoft.

  • 3 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sound Booster 1.13 Build 575 by Razvan Serea Increase volume on your laptop. Boost the volume of even very quiet speakers. Raise volume above maximum. Letasoft Sound Booster can be used as an extra amplifier when the volume of the program you are listening to is too low for comfortable listening and you feel that your PC’s speakers can produce a louder sound. This can be the case when the audio or video has been recorded at the level below normal. Or, for example, when the other person’s microphone you are talking to on Skype, is not working properly. There can be a plenty of other reasons why the sound is being too quiet and there is not much you can do about it except buy external speakers. Sound of any application that is being played in the system can be amplified up to 500%. Letasoft Sound Booster can raise volume of programs like web browsers, on-line communication software (Teams, Discord, Zoom), any kind of media player or games. Simply put, volume of virtually any program that can play any sound in PC, can be boosted to a comfortable level with Letasoft Sound Booster. You can control current volume with the pop-up slider from the system tray. Alternatively, you can assign system-wide hot keys for increasing and decreasing, and use them when you need to adjust volume Letasoft Sound Booster constantly monitors current gain level and prevents samples from clipping, thus reducing all major sound distortions. Sound Booster 1.13 Build 575 changelog: usability improvements minor bug fixes Download: Letasoft Sound Booster 1.13.0.575 | 5.4 MB (14-Day Free Trial) View: Letasoft Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I own these and the normal QuietComfort ones from Bose. The QC are amazing and I want to love these, but for the life of me, I have a terrible time getting them attached to my ears.
    • Thanks for the tip. I am giving it a try. Initial quick impression: I like it.
    • Welcome to Neowin. Enjoy your time here!
  • Recent Achievements

    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      89
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!