Transformers: Dark of the Moon (Transformers 3)


Recommended Posts

^That's what I thought about the new Megatron as well the instant I saw it.

He should be called Megatron Repair then :laugh:

Had half of his face blown off (think Two Face from Batman, which supposedly is the reason for the cape in the new movie), and was otherwise severely damaged from his fight with Optimus Prime. Starscream convinced him to retreat, saying something like "I'd never call you a coward, but sometimes cowards do survive". AFAIK, Megatron, Starscream, and Soundwave are the only 3 of the Decepticons on or near Earth known to survive the final battle.

There's still Barricade who disappeared from the first movie.

^He changed his disguise from TF1 to TF2 as well. It's so that the Autobots can't find him I guess. He stood out way to much on Earth as a futuristic airplane and futuristic tank.

Also, we haven't read or seen anything of the story for TF3 besides the teaser and a few stabs into the wild. So no one can really know for sure. All I know is that those 2 things are plausible.

^He changed his disguise from TF1 to TF2 as well.

Technically, he didn't change his alt mode, Scalpel changed it for him when they took parts from Scrapmetal to repair the damage he suffered during the first movie. I'm thnking that at least part of the reason for him finally taking on a disguise is the comment by Starscream at the end of ROTF about cowards surviving.

By the way, I've though about one other thing: Scalpel probably survived ROTF as well since, unless I missed it, he didn't participate in the final battle and wasn't injured or destroyed when Optimus Prime and Bumblebee rescued Sam from Megatron and Starscream earlier in the movie.

What happened to Megatron at the end of the last movie? I can't remember.

he is all crippled up (lost a foot & arm) thanks to optimus when he got power boot, personally i think we will see galvatron very early in TF3 :/

Technically, he didn't change his alt mode, Scalpel changed it for him when they took parts from Scrapmetal to repair the damage he suffered during the first movie. I'm thnking that at least part of the reason for him finally taking on a disguise is the comment by Starscream at the end of ROTF about cowards surviving.

By the way, I've though about one other thing: Scalpel probably survived ROTF as well since, unless I missed it, he didn't participate in the final battle and wasn't injured or destroyed when Optimus Prime and Bumblebee rescued Sam from Megatron and Starscream earlier in the movie.

They destroyed a Deception under water to revive Megatron. I believe Scalpel had nothing to do with it. I never really literally meant that HE had changed it, all I meant was that his disguise changed in Transformers 2.

They destroyed a Deception under water to revive Megatron. I believe Scalpel had nothing to do with it.

I've watched the movie countless times with my older son over the last couple of weeks since he's been out of school for Christmas (at almost 5 years old, he is a total Transformers fanatic, and can change his toys back and forth better than I can!), and trust me, Scalpel is there doing the "surgery" on Megatron. He is the one who tells the other Decepticons to "kill ze little one" (Scrapmetal).

Wouldn't it be cool if Optimus kept the parts donated to him by JetFire, to make him look like one real bad ass truck?

He shed those parts after his fight with Megatron and The Fallen at the end of ROTF.

I suspect this film will be crap like the last one

The only people who really seemed to think it was "crap" were movie critics who gave it horrible reviews. It did better at the box office than the first one did (better even than a lot of movies that got good reviews and even Oscar winners!). Sure, it had its weak parts, but all in all it was s really fun and entertaining movie.

I'm really of the opinion that most movie critics are totally out of touch with the reality of what MOST people really like in a movie. I can almost guarantee that if a movie critic hates a movie, it is probably going to be a box office hit, and one that I will love.

If movie critics and the Acadamy Awards had their way, we'd only have POS movies like "The Hurt Locker". Critics and awards shows don't tell us how good a movie is, we tell the studios by ticket sales, and ROTF wipes the floor with a LOT of movies that got far better reviews and even tons of Oscars.

And what, just left them in Egypt? Surely he'd keep them...

It was a one-time use thing. Most of the parts were badly damaged too. And not to mention, incompatible with his vehicle form. It's like trying to curl up with a suit of armour. It just doesn't work.

It was a one-time use thing. Most of the parts were badly damaged too. And not to mention, incompatible with his vehicle form. It's like trying to curl up with a suit of armour. It just doesn't work.

Yeah, but every molecule in the transformers body is dynamic; the parts could easily transform to become something more compatible, like a Jet-Truck. Come on man, use your imagination, where's the child within you?

Optimus getting the rocket upgrade at the end was about as awful as Robocop flying at the end of Robocop 3. It felt like it was thrown into the film to give the audience a, "WHOA! COOOOOL!!" moment, deus ex machina style. Hoping the third doesn't suck like the second.

Yeah, but every molecule in the transformers body is dynamic; the parts could easily transform to become something more compatible, like a Jet-Truck. Come on man, use your imagination, where's the child within you?

This doesn't really make sense in Bay's movies tbh. If this could work, then they would've used all the other destroyed Transformer as well.

@roadwarrior: Ah yes, now I remember. Guess this is my excuse to rewatch both movie 1 and 2 :p

@FusionOpz: Go have a look through this thread. There are photos posted with Optimus Prime's Trailer :)

@roadwarrior: Ah yes, now I remember. Guess this is my excuse to rewatch both movie 1 and 2 :p

I swear, I think I catch something new every time I watch ROTF. The action scenes are so visually dense that you really have to watch it multiple times to catch some of the things going on in the background. Many of the things that people complain about (such as the individual vehicles that make up Devastator also being present in other battle scenes while they should be attached to him) can also have a perfectly reasonable explanation (there were simply multiple versions of the consturction vehicles: the individual robots and also the components of Devastator, which you never see turn into robots).

I swear, I think I catch something new every time I watch ROTF. The action scenes are so visually dense that you really have to watch it multiple times to catch some of the things going on in the background. Many of the things that people complain about (such as the individual vehicles that make up Devastator also being present in other battle scenes while they should be attached to him) can also have a perfectly reasonable explanation (there were simply multiple versions of the consturction vehicles: the individual robots and also the components of Devastator, which you never see turn into robots).

Woah, I've watched the movie countless times but didn't realise that haha!

I swear, I think I catch something new every time I watch ROTF. The action scenes are so visually dense that you really have to watch it multiple times to catch some of the things going on in the background. Many of the things that people complain about (such as the individual vehicles that make up Devastator also being present in other battle scenes while they should be attached to him) can also have a perfectly reasonable explanation (there were simply multiple versions of the consturction vehicles: the individual robots and also the components of Devastator, which you never see turn into robots).

to be more specific you see some of the Constructicons in robot mode when they are searching for Sam and Mikalea in the shed/house thing. Also, if you look closesly at the Decepticon arrival , you also see Bonecrusher in vehicle mode.

to be more specific you see some of the Constructicons in robot mode when they are searching for Sam and Mikalea in the shed/house thing. Also, if you look closesly at the Decepticon arrival , you also see Bonecrusher in vehicle mode.

Yes, exactly. Bonecrusher surviving the first movie isn't necessarily impossible. Other Transformers were shown to be decapitated and still survive (Frenzy), and Bonecrusher's remains are never seen after the freeway battle (they aren't shown being dumped into the ocean at the end). As for Devastator and the Constructicons, it is entirely possible (and plausible) that the vehicles that make up Devastator are NOT the same ones that are seen fighting as robots in the other scenes. There are a BUNCH of Decepticon protoforms that fall to Earth just before the battle, certainly enough to account for two complete sets of construction vehicles. And we already know that at in at least two diferent cases, more than one Decepticon scanned similar vehicles (Blackout and Grindor both scanned similar helicoptors, and one part of Devastator is the same type of excavator as Demolisher that Optimus Prime destroyed at the beginning of the movie, although their colors are opposite of each other).

Yes, exactly. Bonecrusher surviving the first movie isn't necessarily impossible. Other Transformers were shown to be decapitated and still survive (Frenzy), and Bonecrusher's remains are never seen after the freeway battle (they aren't shown being dumped into the ocean at the end). As for Devastator and the Constructicons, it is entirely possible (and plausible) that the vehicles that make up Devastator are NOT the same ones that are seen fighting as robots in the other scenes. There are a BUNCH of Decepticon protoforms that fall to Earth just before the battle, certainly enough to account for two complete sets of construction vehicles. And we already know that at in at least two diferent cases, more than one Decepticon scanned similar vehicles (Blackout and Grindor both scanned similar helicoptors, and one part of Devastator is the same type of excavator as Demolisher that Optimus Prime destroyed at the beginning of the movie, although their colors are opposite of each other).

Sounds like a stretch to think multiple robots would take on virtually identical forms, save the twins. No need for excuses, they screwed up and Bay knows it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      471
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!