Transformers: Dark of the Moon (Transformers 3)


Recommended Posts

I swear, I think I catch something new every time I watch ROTF. The action scenes are so visually dense that you really have to watch it multiple times to catch some of the things going on in the background. Many of the things that people complain about (such as the individual vehicles that make up Devastator also being present in other battle scenes while they should be attached to him) can also have a perfectly reasonable explanation (there were simply multiple versions of the consturction vehicles: the individual robots and also the components of Devastator, which you never see turn into robots).

There's even loads of Transformers in the comic books that look like each other. It's bound to happen really. Also, you should check out the making off from ROTF. It's an 1 hour in playtime I believe and really interesting. Specially when you find out that Bay was still working on color corrections, by using video call, a few hours before the premiere.

There's even loads of Transformers in the comic books that look like each other. It's bound to happen really. Also, you should check out the making off from ROTF. It's an 1 hour in playtime I believe and really interesting. Specially when you find out that Bay was still working on color corrections, by using video call, a few hours before the premiere.

Where can I see that?

Sounds like a stretch to think multiple robots would take on virtually identical forms, save the twins. No need for excuses, they screwed up and Bay knows it.

The twins didn't. Skids was a Chevy Beat and Mudflap was a Chevy Trax, two very different cars (although roughly the same size). The two helicopters, Blackout and Grindor both took on virtually identical forms (MH-53 Pave Low and CH-53 Sea Stallion), and the two excavators are quite obviously the same type, but different characters, so why is it so unbelieveable that when a large group of Decpticon protoforms landed in the middle of the desert, near what appears to be an open pit mine, that more than one of them would each scan the same vehicle? Remember that protoforms need to scan an alt-mode roughly similar in mass to their normal body, and there likely weren't a huge number of vehicles in the area to choose from that were large enough for them to use. If you watch and listen carefully, there are well over a dozen protoforms that impact in the desert, more than enough for all of the construction vehicles to be scanned more than once.

So which one is the real Ultra Magnus?

Shots before:

post-26908-0-97557200-1293656921.jpg

Wikipedia's Page:

Universespychangerultramganus.jpg

The toy I had looked more like this:

http://members.wri.com/jeffb/transformers/UltraMagnus.jpg[/img]

Depends on which version you want to choose: http://tfwiki.net/wiki/Ultra_Magnus

The one from the 2008 Animated series is a similar type of vehicle: Leaderanimatedultramagnus.jpg

There's also Inferno, who is a fire truck in most versions, but supposedly the producers have stated emphatically that the fire truck in the movie IS NOT Inferno.

I am not digging the clothed Megatron. Seemed like a total rip off of Repair Exia from Gundam 00. If noone knows about it, here's a pic.

GundamExiaRepair.jpg

Thank you! I'm so glad I wasn't the only one who had that come to mind when seeing caped Megatron. :D

Voice Actor Bill Fagerbakke will lend his voice to Transformers: Dark of the Moon.

Probably best known for his work as the lovely idiot Patrick Star on the Nickelodeon hit show, Spongebob Squarepants, Bill Fagerbakke has been confirmed to be voicing one of the Chevy Impalas in third installment of Transformers.

If you are keen on voice actors and know a little bit about Mr. Fagerbakke, then you'll recognize him as the voice of Bulkhead from Transformers Animated also.

Regarding the news, there were two types of Chevrolet Impalas on the set during Transformers 3 filming; NASCAR Wreckers and an Orange-Black stock car. The Wreckers have also been confirmed to be Transformers as well.

http://www.comicbookmovie.com/news/?a=27419

Anyone else think Leonard Nimoy will reprise his vocal role as GalvaTron?

BTW, who is this?

The caption read as Galvatron but it doesn't look like him to me:

Perhaps he's UltraTron.

Anyway, this is what Galvatron should look like:

Both of those appear to be custom figures that someone made.

@TonyLock: UltraTron? You making up new characters up now? Also, the making-off can indeed be seen on the Special Edition DVD. Also, who said anything about Galvatron being in this movie?

@TonyLock: UltraTron? You making up new characters up now? Also, the making-off can indeed be seen on the Special Edition DVD. Also, who said anything about Galvatron being in this movie?

Ultratron? :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:

0.jpg

maybe? :laugh:

Well, you never know. Who knows if Bay will introduce Mangatron or even Galvinator?

So far he has stuck with fairly well known characters, and there are plenty of others he could still use, so why would he need to make up any new names?

Chinese website Taobao has posted a look at two Legends class toys from the Transformers: Dark of the Moon toyline. The figures seem to be the Transformers for the blue NASCAR vehicle and the black Decepticon suburbans that were part of the filming of the movie over the summer.

See Pictures HERE

Those look sort of cool, but being Legends class, very simplistic. Funny that they are sitting on the cardback for Dead End. I just picked that one up for my son on clearance at TRU the other day, along with Jolt. One of the side windows/wings promptly broke off due to the brittle plastic surrounding the hinge, but it works OK without it (it simply looks like he has his passenger side window rolled down when in vehicle mode).

Well, you never know. Who knows if Bay will introduce Mangatron or even Galvinator?

You can dream on with that thought :p

@Razorwing: Oh god :rofl:

Also, those toys are looking rather odd.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The entire world moved to the vastly superior and now universally supported Dolby Atmos technology a very long time ago, mate.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      543
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!