Transformers: Dark of the Moon (Transformers 3)


Recommended Posts

I swear, I think I catch something new every time I watch ROTF. The action scenes are so visually dense that you really have to watch it multiple times to catch some of the things going on in the background. Many of the things that people complain about (such as the individual vehicles that make up Devastator also being present in other battle scenes while they should be attached to him) can also have a perfectly reasonable explanation (there were simply multiple versions of the consturction vehicles: the individual robots and also the components of Devastator, which you never see turn into robots).

There's even loads of Transformers in the comic books that look like each other. It's bound to happen really. Also, you should check out the making off from ROTF. It's an 1 hour in playtime I believe and really interesting. Specially when you find out that Bay was still working on color corrections, by using video call, a few hours before the premiere.

There's even loads of Transformers in the comic books that look like each other. It's bound to happen really. Also, you should check out the making off from ROTF. It's an 1 hour in playtime I believe and really interesting. Specially when you find out that Bay was still working on color corrections, by using video call, a few hours before the premiere.

Where can I see that?

Sounds like a stretch to think multiple robots would take on virtually identical forms, save the twins. No need for excuses, they screwed up and Bay knows it.

The twins didn't. Skids was a Chevy Beat and Mudflap was a Chevy Trax, two very different cars (although roughly the same size). The two helicopters, Blackout and Grindor both took on virtually identical forms (MH-53 Pave Low and CH-53 Sea Stallion), and the two excavators are quite obviously the same type, but different characters, so why is it so unbelieveable that when a large group of Decpticon protoforms landed in the middle of the desert, near what appears to be an open pit mine, that more than one of them would each scan the same vehicle? Remember that protoforms need to scan an alt-mode roughly similar in mass to their normal body, and there likely weren't a huge number of vehicles in the area to choose from that were large enough for them to use. If you watch and listen carefully, there are well over a dozen protoforms that impact in the desert, more than enough for all of the construction vehicles to be scanned more than once.

So which one is the real Ultra Magnus?

Shots before:

post-26908-0-97557200-1293656921.jpg

Wikipedia's Page:

Universespychangerultramganus.jpg

The toy I had looked more like this:

http://members.wri.com/jeffb/transformers/UltraMagnus.jpg[/img]

Depends on which version you want to choose: http://tfwiki.net/wiki/Ultra_Magnus

The one from the 2008 Animated series is a similar type of vehicle: Leaderanimatedultramagnus.jpg

There's also Inferno, who is a fire truck in most versions, but supposedly the producers have stated emphatically that the fire truck in the movie IS NOT Inferno.

I am not digging the clothed Megatron. Seemed like a total rip off of Repair Exia from Gundam 00. If noone knows about it, here's a pic.

GundamExiaRepair.jpg

Thank you! I'm so glad I wasn't the only one who had that come to mind when seeing caped Megatron. :D

Voice Actor Bill Fagerbakke will lend his voice to Transformers: Dark of the Moon.

Probably best known for his work as the lovely idiot Patrick Star on the Nickelodeon hit show, Spongebob Squarepants, Bill Fagerbakke has been confirmed to be voicing one of the Chevy Impalas in third installment of Transformers.

If you are keen on voice actors and know a little bit about Mr. Fagerbakke, then you'll recognize him as the voice of Bulkhead from Transformers Animated also.

Regarding the news, there were two types of Chevrolet Impalas on the set during Transformers 3 filming; NASCAR Wreckers and an Orange-Black stock car. The Wreckers have also been confirmed to be Transformers as well.

http://www.comicbookmovie.com/news/?a=27419

Anyone else think Leonard Nimoy will reprise his vocal role as GalvaTron?

BTW, who is this?

The caption read as Galvatron but it doesn't look like him to me:

Perhaps he's UltraTron.

Anyway, this is what Galvatron should look like:

Both of those appear to be custom figures that someone made.

@TonyLock: UltraTron? You making up new characters up now? Also, the making-off can indeed be seen on the Special Edition DVD. Also, who said anything about Galvatron being in this movie?

@TonyLock: UltraTron? You making up new characters up now? Also, the making-off can indeed be seen on the Special Edition DVD. Also, who said anything about Galvatron being in this movie?

Ultratron? :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:

0.jpg

maybe? :laugh:

Well, you never know. Who knows if Bay will introduce Mangatron or even Galvinator?

So far he has stuck with fairly well known characters, and there are plenty of others he could still use, so why would he need to make up any new names?

Chinese website Taobao has posted a look at two Legends class toys from the Transformers: Dark of the Moon toyline. The figures seem to be the Transformers for the blue NASCAR vehicle and the black Decepticon suburbans that were part of the filming of the movie over the summer.

See Pictures HERE

Those look sort of cool, but being Legends class, very simplistic. Funny that they are sitting on the cardback for Dead End. I just picked that one up for my son on clearance at TRU the other day, along with Jolt. One of the side windows/wings promptly broke off due to the brittle plastic surrounding the hinge, but it works OK without it (it simply looks like he has his passenger side window rolled down when in vehicle mode).

Well, you never know. Who knows if Bay will introduce Mangatron or even Galvinator?

You can dream on with that thought :p

@Razorwing: Oh god :rofl:

Also, those toys are looking rather odd.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!