HOWTO: Make Windows 7 use a good Mac color profile

By Simon
in Apple (macOS)

 Share

Recommended Posts

Grand Master

Simon Veteran

Posted
  • Veteran
Posted (edited)

Throughout the Windows 7 beta, one thing that put me off a little bit was the poor color that I got by default, and even after using Windows to calibrate my display.

So I set out to fix it. Here's the steps I took. Keep in mind this is easier if you have the Boot Camp 3.0 drivers installed, as you'll be using the color profile generated for you by Mac OS X, and with Boot Camp 3.0 you don't need to get the profile off your other partition via a flash drive/email/upload/whatever.

  1. Open up your Macintosh HD via "Computer", and browse to /Library/ColorSync/Profiles/Displays
  2. You should see a color profile of some sort there. If you do not, try looking in /Users/<your home directory>/Library/ColorSync/Profiles/. You may need to generate a color profile via the Mac OS X system preferences - see below
  3. Right click on this color profile and select "Install Profile". You can now close your Mac HD.
  4. Open the Control Panel, click "Adjust Screen Resolution", and click "Advanced Settings"
  5. Select the "Color Management" tab, and click the "Color Management" button that appears.
  6. Alternatively, just type "color management" into the Start menu and select it from the search pane. (thanks Danrarbc!)
  7. Click the "Advanced" tab, and click the "Change System Defaults" button.
  8. Click the "Advanced" tab in the new window that appears
  9. Ensure that the "Use Windows display calibration" checkbox is checked
  10. Select the "Devices" tab in this window again.
  11. Click the "Add" button and select the color profile you installed from your Mac partition.
  12. Click "OK"
  13. Now, select the color profile from the list.
  14. Click the "Set as default profile" button, on the bottom right.
  15. Your display should now brighten and lose the heavy blue tinge that has plagued you for months, or even years if you used Vista.

You may not need to complete all the steps, but I did. It really does make the Windows experience on a MacBook much nicer, and the same should apply to an iMac or any Mac with an integrated display. I believe Windows can figure out external displays without problem, but don't quote me there...

Share your experiences here! I have no doubt that this guide will not work for everyone, but the guide I found didn't do everything for me (see here, thanks to whoever did that).

And happy proper color support!

If there isn't a profile there

  1. Boot into Mac OS X
  2. Open System Preferences.
  3. Open the "Displays" panel and click the "Color" tab.
  4. Click the "Calibrate" button
  5. You can actually click "next" through this wizard, the whole way through. The default settings should be selected.
  6. Once the wizard is done, your profile will be located in /Users/<your user folder>/Library/ColorSync/Profiles/. Continue the process in Windows 7 from here.

If your color choice doesn't stick after a reboot, and you use an nVidia video card (9400M, 9600M GT, etc. etc.)

  1. Go here: http://www.nvidia.com/Download/index.aspx?lang=en-us
  2. Download the driver for your video card; chances are that your current driver is out of date.
  3. Install it
  4. Go to the Start Menu and start to type in 'nvidia'. You'll probably get a result that has the word 'PhysX' in it - that will get you to the nVidia control panel.
  5. On the left hand sidebar, select 'Adjust desktop color settings' (under the 'Display' header)
  6. On the screen that appears, under 'Choose how color is set', make sure 'Other applications control color settings' is the choice selected. Click OK, or exit the control panel.
  7. Now, try the guide above again.

If you use an ATI card, I can't help you as I'm on a MacBook Pro with the 9400M/9600M GT. All I can suggest is that you make sure you have the latest drivers, and are not managing your color through the ATi driver.

Edited by Simon
Grand Master

Danrarbc

Posted
Posted

You could always just type "Color Management" or "col m" or something along those lines into the start menu to quickly get to that control panel, no need to get there the long way.

Start Menu search. It's a good thing.?

Grand Master

Simon Veteran

Posted
  • Author
  • Veteran
Posted

The profile you use depends entirely on the monitor you're using. A MacBook from 2006 will be different from a MacBook Pro from 2006 which will be different from a MacBook from 2008 and a MacBook Pro from 2008, which are all different from every iMac.

Basically, we need a model :p or you can grab the profile from your Mac partition, which will probably be the best route to take.

I've also solved a problem I had with color management settings not sticking after a reboot. I might be the only one with the problem, but I think it's all down to nVidia's control panel and color management (which does not seem as powerful as Windows' color management, nor does it seem to read standard color profiles).

So, here's what you do:

  1. Go here: http://www.nvidia.com/Download/index.aspx?lang=en-us
  2. Download the driver for your video card; chances are that your current driver is out of date.
  3. Install it
  4. Go to the Start Menu and start to type in 'nvidia'. You'll probably get a result that has the word 'PhysX' in it - that will get you to the nVidia control panel.
  5. On the left hand sidebar, select 'Adjust desktop color settings' (under the 'Display' header)
  6. On the screen that appears, under 'Choose how color is set', make sure 'Other applications control color settings' is the choice selected. Click OK, or exit the control panel.
  7. Now, try the guide above again.

I may be the only one with the problem, since I did a lot of messing around to try and get color management working.

  • 2 months later...
Proficient

MrFuji

Posted
Posted

After installing the newest nvidia notebook drivers, I have to re-apply the color profile every time I restart. Nvidia bug? Apparently, I'm not the only one affected.

edit: Ahem, scratch that. Just booted 7 and it applied the color profile at logon. Hope it'll stay that way...

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Last of Us creator Neil Druckmann steps away from HBO show to focus on next Naughty Dog game

      By +Random Stranger · Posted

      Yeah define not catching up then to see the next part of this then
    • RoboForm 9.7.7

      By Copernic · Posted

      RoboForm 9.7.7 by Razvan Serea RoboForm is the top-rated Password Manager and Web Form Filler that completely automates password entering and form filling. RoboForm makes logging into Web sites and filling forms faster, easier, and more secure. RoboForm memorizes and securely stores each user name and password the first time you log into a site, then automatically supplies them when you return. RoboForm's powerful Logins feature eliminates the manual steps of logging into any online account. With just one click RoboForm will navigate to a Web site, enter your username and password and click the submit button for you. Completing long registration or checkout forms is also a breeze. Simply click on your RoboForm Identity and RoboForm fills-in the entire form for you. You no longer need to remember all your passwords. You remember one Master Password, and RoboForm remembers the rest. This allows you to use stronger passwords, making your online experience more secure. RoboForm uses strong AES encryption for complete data security. The all new RoboForm comes with Chrome and Safari browser support, iPhone/iPad and Android support, as well a brand new RoboForm Everywhere license for use on unlimited computers and mobile devices. RoboForm 9.7.7 changelog: Show RF Desktop unlock UI when user selects "Unlock" in RF Desktop UI. Fixed blank icon appeared in the Windows taskbar for RF Editor. Miscellaneous bug fixes. Download: RoboForm 9.7.7 | 42.2 MB (Free, paid upgrade available) View: RoboForm Website Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • RIP LG smartphones, today is the last day to update your device

      By matthiew · Posted

      LG G5 was the last memorable phone I had. The Samsung and Pixels and have had since have been disappointing and boring.
    • This duo of UGREEN Intel DDR5 4-Bay diskless NAS will make you want to press buy

      By kowcop · Posted

      Isn't the CPU used to calculate the parity for the RAID? If so, the combination of SSDs and 10GBe might make the CPU more important
    • Android users can now edit texts sent to iPhones, but with a catch

      By fintechfooty · Posted

      yeah GSMA began working to enable end to end encryption between android and iphone last year and apparently a new standard was developed. apple has said that they would implement this in "future software updates" but i haven't heard anything since march, the time this was all reported on. shortly after, i read on forbes that the FBI suggests not sending texts between iphone and android because they're unencrypted. i use signal to chat with my wife but i'd rather just use messages tbh (she has an iphone), i'm not really a 3rd party guy haha

  • Recent Achievements

    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
    • One Month Later
      Uranus_enjoyer earned a badge
      One Month Later
    • Week One Done
      Philsl earned a badge
      Week One Done
    • Week One Done
      Jaclidio hoy earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      438
    2. 2
      ATLien_0
      157
    3. 3
      +FloatingFatMan
      149
    4. 4
      Nick H.
      64
    5. 5
      +thexfile
      62
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!