HOWTO: Make Windows 7 use a good Mac color profile


Recommended Posts

Throughout the Windows 7 beta, one thing that put me off a little bit was the poor color that I got by default, and even after using Windows to calibrate my display.

So I set out to fix it. Here's the steps I took. Keep in mind this is easier if you have the Boot Camp 3.0 drivers installed, as you'll be using the color profile generated for you by Mac OS X, and with Boot Camp 3.0 you don't need to get the profile off your other partition via a flash drive/email/upload/whatever.

  1. Open up your Macintosh HD via "Computer", and browse to /Library/ColorSync/Profiles/Displays
  2. You should see a color profile of some sort there. If you do not, try looking in /Users/<your home directory>/Library/ColorSync/Profiles/. You may need to generate a color profile via the Mac OS X system preferences - see below
  3. Right click on this color profile and select "Install Profile". You can now close your Mac HD.
  4. Open the Control Panel, click "Adjust Screen Resolution", and click "Advanced Settings"
  5. Select the "Color Management" tab, and click the "Color Management" button that appears.
  6. Alternatively, just type "color management" into the Start menu and select it from the search pane. (thanks Danrarbc!)
  7. Click the "Advanced" tab, and click the "Change System Defaults" button.
  8. Click the "Advanced" tab in the new window that appears
  9. Ensure that the "Use Windows display calibration" checkbox is checked
  10. Select the "Devices" tab in this window again.
  11. Click the "Add" button and select the color profile you installed from your Mac partition.
  12. Click "OK"
  13. Now, select the color profile from the list.
  14. Click the "Set as default profile" button, on the bottom right.
  15. Your display should now brighten and lose the heavy blue tinge that has plagued you for months, or even years if you used Vista.

You may not need to complete all the steps, but I did. It really does make the Windows experience on a MacBook much nicer, and the same should apply to an iMac or any Mac with an integrated display. I believe Windows can figure out external displays without problem, but don't quote me there...

Share your experiences here! I have no doubt that this guide will not work for everyone, but the guide I found didn't do everything for me (see here, thanks to whoever did that).

And happy proper color support!

If there isn't a profile there

  1. Boot into Mac OS X
  2. Open System Preferences.
  3. Open the "Displays" panel and click the "Color" tab.
  4. Click the "Calibrate" button
  5. You can actually click "next" through this wizard, the whole way through. The default settings should be selected.
  6. Once the wizard is done, your profile will be located in /Users/<your user folder>/Library/ColorSync/Profiles/. Continue the process in Windows 7 from here.

If your color choice doesn't stick after a reboot, and you use an nVidia video card (9400M, 9600M GT, etc. etc.)

  1. Go here: http://www.nvidia.com/Download/index.aspx?lang=en-us
  2. Download the driver for your video card; chances are that your current driver is out of date.
  3. Install it
  4. Go to the Start Menu and start to type in 'nvidia'. You'll probably get a result that has the word 'PhysX' in it - that will get you to the nVidia control panel.
  5. On the left hand sidebar, select 'Adjust desktop color settings' (under the 'Display' header)
  6. On the screen that appears, under 'Choose how color is set', make sure 'Other applications control color settings' is the choice selected. Click OK, or exit the control panel.
  7. Now, try the guide above again.

If you use an ATI card, I can't help you as I'm on a MacBook Pro with the 9400M/9600M GT. All I can suggest is that you make sure you have the latest drivers, and are not managing your color through the ATi driver.

Edited by Simon

You could always just type "Color Management" or "col m" or something along those lines into the start menu to quickly get to that control panel, no need to get there the long way.

Start Menu search. It's a good thing.?

The profile you use depends entirely on the monitor you're using. A MacBook from 2006 will be different from a MacBook Pro from 2006 which will be different from a MacBook from 2008 and a MacBook Pro from 2008, which are all different from every iMac.

Basically, we need a model :p or you can grab the profile from your Mac partition, which will probably be the best route to take.

I've also solved a problem I had with color management settings not sticking after a reboot. I might be the only one with the problem, but I think it's all down to nVidia's control panel and color management (which does not seem as powerful as Windows' color management, nor does it seem to read standard color profiles).

So, here's what you do:

  1. Go here: http://www.nvidia.com/Download/index.aspx?lang=en-us
  2. Download the driver for your video card; chances are that your current driver is out of date.
  3. Install it
  4. Go to the Start Menu and start to type in 'nvidia'. You'll probably get a result that has the word 'PhysX' in it - that will get you to the nVidia control panel.
  5. On the left hand sidebar, select 'Adjust desktop color settings' (under the 'Display' header)
  6. On the screen that appears, under 'Choose how color is set', make sure 'Other applications control color settings' is the choice selected. Click OK, or exit the control panel.
  7. Now, try the guide above again.

I may be the only one with the problem, since I did a lot of messing around to try and get color management working.

  • 2 months later...

After installing the newest nvidia notebook drivers, I have to re-apply the color profile every time I restart. Nvidia bug? Apparently, I'm not the only one affected.

edit: Ahem, scratch that. Just booted 7 and it applied the color profile at logon. Hope it'll stay that way...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The viewing figures in season 2 plummeted after 1 of the main characters died in season 2 episode 1. I think hbo is regretting listening to him so they got rid of him.
    • Google Workspace now lets you use custom AI Gems directly in Docs, Gmail, and more by Paul Hill Google Workspace users can now access Gems from the side panel of Google Docs, Slides, Sheets, Drive, and Gmail. Previously, Gems could only be accessed from the Gemini app directly. For anyone not familiar with Gems, they’re a more advanced feature in Gemini where you can make your own chatbots, powered by Gemini, with custom instructions. If you’re interested in learning more about them, check out my editorial from April, where I argue custom AI bots are the best thing about generative AI and how to create your own bots. The decision to make Gems available across Google Workspace has the potential to significantly speed up people’s workflows if they’ve started using Gems already. If you’ve never made a Gem, Google has several pre-made ones including a Brainstormer, Writing editor, Coding partner, and Learning guide. Google Workspace users can leverage Gems in an almost infinite number of ways. For example, imagine if you’re a teacher in whatever country and you have to make lesson plans for your class that must follow a certain structure, you can use natural language to program a gem to expect certain inputs from you (such as grade, subject, topic etc) and get an output that follows the required guidelines. If you’re a journalist, you could create a gem to quickly strip out the key bits of news from a press release or if you’re a student you can create a bot to break down complicated subjects into something easier to understand. The possibilities are nearly endless and now the Gems you make are even more accessible. Google mentioned that Gems can be accessed via the side panel of all supported Workspace applications and can be used across Workspace capabilities including @ mentioning, accessing files and folders, and more. If you need to create a Gem, you’ll still need to do that on the Gemini website. To get started with Gemini in Google Workspace, just click the “Ask Gemini” (spark button) in the top-right corner. Google said that the Gems feature rollout is an extended rollout which means it might take more than 15 days to get the feature. Admins out there do not need to do anything and there are no specific admin controls in the side panel for Gems or Gemini.
    • Microsoft changes hit Teams Android devices: Disable Entra ID policy to restore sign-in by Paul Hill As part of its Secure Future Initiative, Microsoft has deployed a new Entra ID Conditional Access policy targeting Device Code Flow authentication. Unfortunately, it has led some Microsoft Teams-certified Android devices (Teams Rooms on Android, Teams Phones, Teams Panels, and Teams Displays) to be logged out and signing back in can be a bit fiddly so guidance has been shared. Microsoft said that it shared previous guidance which explained how to exclude Android devices, but it seems some admins didn’t catch this as many devices were not excluded and have been signed out. It’s important to realize that this is not a bug, it’s a security feature. However, the move could have been better communicated. To sign the devices back in, you can do so manually. However, if the devices are remote you’ll need to follow these steps: By disabling the “Block device code flow” policy in step 1, it will change everything back to how it was before Microsoft decided to enable it to boost security. This will allow you to get those affected Android devices logged back in again. Also pay special attention to step 2 which says you might need to reboot your device three times. Once you have your Android devices logged in again, it’s probably a good idea to follow Microsoft’s previous guidance and add these to an exclusion list before re-enabling the “Block device code flow” policy. Microsoft recommends only allowing DCF where it’s absolutely necessary and then blocking it elsewhere. The best thing to do is to add your Teams Android device to the exclusion list - this will allow these devices to operate normally, while boosting overall security. If you’re an admin and have been impacted by this, be sure to take proactive measures to avoid disruptions in the future.
    • Can someone help me with writing a batchfile using notepad to tell me to start a vpn plz? I would greatly appreciate any help  
  • Recent Achievements

    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
    • One Month Later
      Uranus_enjoyer earned a badge
      One Month Later
    • Week One Done
      Philsl earned a badge
      Week One Done
    • Week One Done
      Jaclidio hoy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      435
    2. 2
      ATLien_0
      158
    3. 3
      +FloatingFatMan
      146
    4. 4
      Nick H.
      65
    5. 5
      +thexfile
      62
  • Tell a friend

    Love Neowin? Tell a friend!