Blurry shots after dropped camera bag


Recommended Posts

I put my camera bag with 3 lenses and a nikon d90 on a shelf at the top of my closet and my cat climbed up there while I wasn't there and pushed the bag all the way to the ground.

There does not seem to be any physical damage to any of my gear... but for some reason my 18-105mm started to take blurry shots w/ auto focus even in bright light. on the other hand, my 50mm 1.8 is still taking crisp pictures.

Is this something usual that happens when you drop a lens ?

I haven't tried my 300mm yet... ugh.

possible malfunctioning lens due to the drop. The optics can be easily knocked outta alignment if u drop them from considerable height.

ya, sounds exactly like what happened. Nikon will fix it , but it won't be free (will cost less than a new lens though)

I just tried my 50mm again and it doesnt seem to be quite as crisp as before. Could just be my mind playing tricks on me because i'm stressed.

Could that kinda of shock affect the body in the same way ?

At first I thought that if the shock would have affected either the lens or the body, the blur would have been alot more obvious than that. It's a subtle blur but a blur nonetheless.

I'll try to post some pics

Yeah. Photo gear isn't like buddha statues, it really doesn't have to be at the highest point in your house. And just to chime in, lens elements are probably knocked out of alignment. The 50mm could be knocked out of alignment, but it could also be your mind playing tricks on you, hard to call.

How high is this top shelf you're talking about?

I'd say about 7 feet drop and everything was in this bag (LowePro Slingshot 200)

It's a very good bag but I ain't sure it would sustain that kind of drop.

Not sure what went through my mind when I decided to put it up there.

Maybe the sensor just got damaged but I doubt it. That case would mean that every lens produces the same blurry results but you say your 50mm is still sharp. Most probably is just as o0moonman0o says

  • 2 weeks later...

I dropped my d40 with lens attached onto concrete from about 2 foot in May this year. No immidiate cosmetic damage but I did later find that images shot on any of the semi auto modes (A,S,P) were over exposed by about a stop and a half.

Think this is due to the fall or due to the age ofthe camera or something else (camera is 2 and a bit years old)

malc

Could be the shutter wearing out. And that could be from lots of use (probably over 50,000 photos) or from being dropped, or a combo of both.

I'm no where near the 50K yet (maybe 12500-15000) plus I let my wee boy use it too - he's 6 but been using it since I got it, sometimes takes a good image - and he has dropped it once by mistake, poor lad was well upset thinking I was goni murder him but I didn't (t'was, indeed, an accident)

Still the more problems I have with it the easier it will be to convince myself to upgrade!!

lol i know that feeling :p

Thanks for the replies everyone, sorry for getting back to you so late.

I took the camera and all 3 lenses to the shop and they tested all lenses with a chart to see if they were off-focus.

Both the 50mm 1.8 and the 70-300 were fine. The 18-105mm was way out of focus. The guy said the problem could be the lens being off-axis.

That lens runs for about 359$ CAD+tx. Does anyone know how much it could cost to have it repaired by Nikon ? Is it better to just try to sell the lens saying there's a problem with it and use that money to buy a new lens ?

:no:

Thanks for the replies everyone, sorry for getting back to you so late.

I took the camera and all 3 lenses to the shop and they tested all lenses with a chart to see if they were off-focus.

Both the 50mm 1.8 and the 70-300 were fine. The 18-105mm was way out of focus. The guy said the problem could be the lens being off-axis.

That lens runs for about 359$ CAD+tx. Does anyone know how much it could cost to have it repaired by Nikon ? Is it better to just try to sell the lens saying there's a problem with it and use that money to buy a new lens ?

:no:

Did the guy at the camera store not give you a quote on the repair costs?

I'm assuming repairing it would be less than 359 CAD.

They usually can't quote you a repair price until they have the damaged product at the repair factory and the technicians there look at it. That's standard practice.

I went to a local professional photography store to have it tested. He told me to get in touch with Nikon directly to have it repaired... which means I'll be one lens short for more than a month. UGH!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
    • Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop by Sayan Sen Despite the advent of AI-generated imagery, Adobe's Photoshop remains one of the most popular tools on this planet. Adobe does not have a publicly reported total user count but it's probably not wrong to assume there are millions. As of 2025, Adobe Creative Cloud has had approximately 41 million paid subscribers, many of whom likely use Photoshop. In addition, more than 166,000 companies worldwide are apparently also using the app. These figures are according to a very recent report by SQ Magazine. Out of them, it is fair to assume that many are probably running Windows. As such, there is good news for these users as Microsoft has announced Photoshop is getting a big 20% performance boost on x86-64 (AMD64) systems and a 13% bump-up on Arm devices. This is definitely great news for them as many have complained about the slow performance and general sluggishness of Photoshop on Windows 11 ever since the advent of the latter back in 2021. If you are wondering how Microsoft managed to do this, the answer lies in a combination of compiler-level optimizations and a technology called Sample Profile Guided Optimization (SPGO). According to Microsoft, Adobe worked closely with the company’s Visual C++ team and adopted the latest MSVC toolchain enhancements together with SPGO to squeeze more performance out of Photoshop’s CPU-bound workloads. Unlike traditional Profile Guided Optimization (PGO), which requires developers to create special instrumented builds and run lengthy training workloads, SPGO gathers performance data directly from optimized release binaries. This means Adobe could collect real-world usage information which gives a major advantage to this technique, as companies could leverage data collected from actual customer workloads rather than only relying on synthetic benchmark runs. In theory, this should allow optimizations to better reflect how users interact with software in the real world. Thanks to this, there are improvements to code layout, function inlining, hot-and-cold code separation, and other low-level tweaks that help processors execute instructions more efficiently. Essentially the compiler is better able to identify “hot” code paths, those which are most frequently executed, and optimize them accordingly.
    • "The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months¨ I'd prefer to see the lowest price in over a year
    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      521
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!