Upgraded my hard drive


Recommended Posts

I'm not sure if this is an "OK" topic. I just upgraded my Xbox HD from the 20GB I've had since launch to a 120GB Western Digital that I bought for $55. The process wasn't as difficult as I thought and if I get no resistance I was going to post some of the stuff I went through.

Anyways, all my DLC and game saves had me at 1GB free, and that was after deleting all my demos. Now I've installed a couple games and still have about 95GB free. :D

Link to comment
https://www.neowin.net/forum/topic/844106-upgraded-my-hard-drive/
Share on other sites

Well done!! I did the same last month (found a WD BEVS at USD $35) was super easy (well, the backup took a lot) and works perfect, but now I want a 250GB :woot:

I should've done a little more homework. The catalyst to my project was buying "The Ballad of Gay Tony" and realizing I was out of space. I checked around for a 120 and found the cheapest at $55 shipped, which I though was acceptable. Only after I was looking for the BIN file did I see there were bins for 250GB :( Oh well, I'm still happy.

Well, I started by looking up guides on the internet which gave me the software I needed. I had the bin for the 120GB drive, the hddhackr program, and Xplorer360. Once I removed the 20GB drive from the enclosure I hooked it up to a SATA to USB connector I have. Xplorer360 didn't see it. I kept getting a "No FATX drives found" error. So I hooked it up directly in my laptop (which I found out has 2 HD bays, which is convenient). Didn't work. Took my PC apart and connected it to the SATA there. Didn't work. I started searching online for solutions and then it hit me: I hadn't run Xplorer360 in Administrator mode (I'm running Windows 7).

Started it in Admin mode on my laptop and there was the drive! So now I started backing things up. I used the "create image" to make an image of partition 2 and dragged and dropped the contents of partition 3 onto a folder on the desktop. The Cache folder was taking hours so I did more research online. Apparently it goes into loop mode. I had to go in and select the files themselves and drag them out instead of the whole folder. As a tip, before you take the drive off the Xbox, go to "Drive options" and clear the cache so you have less files to transfer (in my case there was only one left). OK, now I have the 20GB drive backed up.

Next step is to prepare the 120GB. I made a bootable USB key with this method. Disconnected my laptop drive, hooked up the new 120 and booted from the key (I had copied the bin file and hddhackr program onto it). The program didn't see the drive either in the first bay or second bay. Opened up my computer and disconnected all the drives. The PC saw the drive but the program didn't. I had plugged the drive into the Secondary Master so I moved it to the Primary Slave, which then worked. I flashed the drive with the bin file and my Western Digital drive suddenly became a Fujitsu. Put the 120 into the hard drive enclosure and out it in the Xbox. It saw the drive (with 107GB free) so I formatted it and put in the console's serial number.

Now I needed to put all my files back. I started up Xplorer (in admin mode) and restored partition 2. I then tried to drag the files back to partition 3 but it wouldn't let me. After some more online digging I came across the fact that Xplorer won't work properly with UAC enabled, even in admin mode. I disabled UAC and was able to drag the files into partition 3 with no problem.

I put the drive back in the enclosure and onto the 360. The only thing it needed to do was rerun the update, but all my gamertags, game saves, and content was there.

I was just going to post about this when i found your topic, yesterday I did this but with a 250gb Western Digital WD2500BEVT Scorpio Blue drive I got for ?30.

Much easier than I expected too, the only real problem I had was restoring partition 2 on the drive as the hacked Xplorer360 for 250gig drives can only read / write to partition 3.

However Xplorer360 extreme2 can write to partition 2 but not partition 3 on a 250gig drive so that was easily sorted out. I didn?t have any of the problems you encountered with UAC and Xplorer360 on Windows 7, it worked ok here with admin rights.

Ive restored all my content fine and am currently installing all my games.

I think doing your own drive is the way to go as Microsoft charge ?89.99 just for the 120gig drive here in the uk! At that price I could make 3x 250gig drives for the same price:ninja:nja:

Can I use the hddss.bin file from my 20gb Xbox HDD on a 120gb WD BEV drive and get full functionality? Or will the 360 recognize my 120gb as a 20gb?

Nope, have to use the HDDSS.bin from a 120gb official xbox hard drive to use on the WD BEV. But, you can find the required HDDSS.bin from the internet from various sources.

But, if you want, you can get a 320GB bevt drive to use it with the 250GB HDDSS.bin.... Thats what I did. Use to have 120GB on it and now its 250GB.

Hope that helps.

Neztea

Nope, have to use the HDDSS.bin from a 120gb official xbox hard drive to use on the WD BEV. But, you can find the required HDDSS.bin from the internet from various sources.

But, if you want, you can get a 320GB bevt drive to use it with the 250GB HDDSS.bin.... Thats what I did. Use to have 120GB on it and now its 250GB.

Hope that helps.

Neztea

And if the Xbox ever comes with a 320Gb drive option, free upgrade! :D

Heh. I might have to look into this soon. I've got about a gig free on my 20 and I don't think that will last much longer.

-Spenser

You will not regret it. I'm just sorry I waited as long as I did, shuffling my DLC and demos, etc.

I have 26 games installed now, all my arcade games, dlc / saves on the 250gig drive and I still have over 90gigs free! :)

My 360 is practically silent now, I recommend anyone thinking about it to go for it! You carnt really go wrong from less than the price of one Xbox 360 game.

Yeah I'm enjoying that actually. My Elite is a Jasper/Lite-on or BenQ (haven't bothered checking), so it's already really quiet as it is, but I've installed MW2 and it's so nice not having to listen to the disc seeking. Even my past 360's weren't too bad, I've been lucky, but it's even better now (Y)

This is probably agenst the rules, maybe, but if anyone has a simple guide for this process can they PM me the link to it? If that's ok that is.
Ask me why you need an I'll tell you. I put my experience here because I did waste some time following a guide. At the end of the day it's really simple.
I have a question guys , Lets say i upgrade My HDD to a 120 GB one or i purchase a Chinese 120 GB Xbox 360 HDD for real cheap ( 65$) wont the forthcoming Update ( the one which makes Datel Products incompatible with Xbox 360 ) render this HDD useless ?

The update in question only cuts out 3rd party memory cards, not HDDs. With the flashed HDD there is no way for the Xbox to tell it isn't a genuine one.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
    • This AdGuard Family lifetime deal is still only $15.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 90% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $15.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $15.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • the MCT currently downloads 26200.8653, so not completely up to date.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      175
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!