Upgraded my hard drive


Recommended Posts

I'm not sure if this is an "OK" topic. I just upgraded my Xbox HD from the 20GB I've had since launch to a 120GB Western Digital that I bought for $55. The process wasn't as difficult as I thought and if I get no resistance I was going to post some of the stuff I went through.

Anyways, all my DLC and game saves had me at 1GB free, and that was after deleting all my demos. Now I've installed a couple games and still have about 95GB free. :D

Link to comment
https://www.neowin.net/forum/topic/844106-upgraded-my-hard-drive/
Share on other sites

Well done!! I did the same last month (found a WD BEVS at USD $35) was super easy (well, the backup took a lot) and works perfect, but now I want a 250GB :woot:

I should've done a little more homework. The catalyst to my project was buying "The Ballad of Gay Tony" and realizing I was out of space. I checked around for a 120 and found the cheapest at $55 shipped, which I though was acceptable. Only after I was looking for the BIN file did I see there were bins for 250GB :( Oh well, I'm still happy.

Well, I started by looking up guides on the internet which gave me the software I needed. I had the bin for the 120GB drive, the hddhackr program, and Xplorer360. Once I removed the 20GB drive from the enclosure I hooked it up to a SATA to USB connector I have. Xplorer360 didn't see it. I kept getting a "No FATX drives found" error. So I hooked it up directly in my laptop (which I found out has 2 HD bays, which is convenient). Didn't work. Took my PC apart and connected it to the SATA there. Didn't work. I started searching online for solutions and then it hit me: I hadn't run Xplorer360 in Administrator mode (I'm running Windows 7).

Started it in Admin mode on my laptop and there was the drive! So now I started backing things up. I used the "create image" to make an image of partition 2 and dragged and dropped the contents of partition 3 onto a folder on the desktop. The Cache folder was taking hours so I did more research online. Apparently it goes into loop mode. I had to go in and select the files themselves and drag them out instead of the whole folder. As a tip, before you take the drive off the Xbox, go to "Drive options" and clear the cache so you have less files to transfer (in my case there was only one left). OK, now I have the 20GB drive backed up.

Next step is to prepare the 120GB. I made a bootable USB key with this method. Disconnected my laptop drive, hooked up the new 120 and booted from the key (I had copied the bin file and hddhackr program onto it). The program didn't see the drive either in the first bay or second bay. Opened up my computer and disconnected all the drives. The PC saw the drive but the program didn't. I had plugged the drive into the Secondary Master so I moved it to the Primary Slave, which then worked. I flashed the drive with the bin file and my Western Digital drive suddenly became a Fujitsu. Put the 120 into the hard drive enclosure and out it in the Xbox. It saw the drive (with 107GB free) so I formatted it and put in the console's serial number.

Now I needed to put all my files back. I started up Xplorer (in admin mode) and restored partition 2. I then tried to drag the files back to partition 3 but it wouldn't let me. After some more online digging I came across the fact that Xplorer won't work properly with UAC enabled, even in admin mode. I disabled UAC and was able to drag the files into partition 3 with no problem.

I put the drive back in the enclosure and onto the 360. The only thing it needed to do was rerun the update, but all my gamertags, game saves, and content was there.

I was just going to post about this when i found your topic, yesterday I did this but with a 250gb Western Digital WD2500BEVT Scorpio Blue drive I got for ?30.

Much easier than I expected too, the only real problem I had was restoring partition 2 on the drive as the hacked Xplorer360 for 250gig drives can only read / write to partition 3.

However Xplorer360 extreme2 can write to partition 2 but not partition 3 on a 250gig drive so that was easily sorted out. I didn?t have any of the problems you encountered with UAC and Xplorer360 on Windows 7, it worked ok here with admin rights.

Ive restored all my content fine and am currently installing all my games.

I think doing your own drive is the way to go as Microsoft charge ?89.99 just for the 120gig drive here in the uk! At that price I could make 3x 250gig drives for the same price:ninja:nja:

Can I use the hddss.bin file from my 20gb Xbox HDD on a 120gb WD BEV drive and get full functionality? Or will the 360 recognize my 120gb as a 20gb?

Nope, have to use the HDDSS.bin from a 120gb official xbox hard drive to use on the WD BEV. But, you can find the required HDDSS.bin from the internet from various sources.

But, if you want, you can get a 320GB bevt drive to use it with the 250GB HDDSS.bin.... Thats what I did. Use to have 120GB on it and now its 250GB.

Hope that helps.

Neztea

Nope, have to use the HDDSS.bin from a 120gb official xbox hard drive to use on the WD BEV. But, you can find the required HDDSS.bin from the internet from various sources.

But, if you want, you can get a 320GB bevt drive to use it with the 250GB HDDSS.bin.... Thats what I did. Use to have 120GB on it and now its 250GB.

Hope that helps.

Neztea

And if the Xbox ever comes with a 320Gb drive option, free upgrade! :D

Heh. I might have to look into this soon. I've got about a gig free on my 20 and I don't think that will last much longer.

-Spenser

You will not regret it. I'm just sorry I waited as long as I did, shuffling my DLC and demos, etc.

I have 26 games installed now, all my arcade games, dlc / saves on the 250gig drive and I still have over 90gigs free! :)

My 360 is practically silent now, I recommend anyone thinking about it to go for it! You carnt really go wrong from less than the price of one Xbox 360 game.

Yeah I'm enjoying that actually. My Elite is a Jasper/Lite-on or BenQ (haven't bothered checking), so it's already really quiet as it is, but I've installed MW2 and it's so nice not having to listen to the disc seeking. Even my past 360's weren't too bad, I've been lucky, but it's even better now (Y)

This is probably agenst the rules, maybe, but if anyone has a simple guide for this process can they PM me the link to it? If that's ok that is.
Ask me why you need an I'll tell you. I put my experience here because I did waste some time following a guide. At the end of the day it's really simple.
I have a question guys , Lets say i upgrade My HDD to a 120 GB one or i purchase a Chinese 120 GB Xbox 360 HDD for real cheap ( 65$) wont the forthcoming Update ( the one which makes Datel Products incompatible with Xbox 360 ) render this HDD useless ?

The update in question only cuts out 3rd party memory cards, not HDDs. With the flashed HDD there is no way for the Xbox to tell it isn't a genuine one.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sorry to be that guy but, Given Trump won again even after a failed first term it would appear attacking the other side is how to gain Government in America. Voters when it came down to it didn't give a s**t about those Democratic achievements and voted for Trump over an intelligent, qualified mixed race woman. We need to face up to this uncomfortable reality. There are more Americacan voters who support racism and christian bigotry along with defending and supporting pedophilia, adjudicated rapists, multiple time convicted felons etc than those who don't. Btw, that is how the world sees America now. Not that Trump voters care as they attempt to cocoon themselves in a white supremacy bubble.
    • That's not clickbait. Clickbait is headlines like, "You'll never guess what this person looks like now" for example. For goodness sake, take a look around the internet if you think this is clickbait. How do sites survive if people don't click through to articles? How many people in all honesty would have clicked this if it had your suggested headline? You and those upvoting your post won't be happy until the web is a couple of hundred websites all behind a paywall.
    • HopToDesk 1.46.2.0 by Razvan Serea HopToDesk aims to improve the user experience by providing a free, easy-to-use, and secure remote desktop solution for all major device types including Windows PC, Mac, Linux, Android, Chrome Books, iOS, and even Raspberry Pi devices. HopToDesk empowers you to connect, control, and collaborate with ease. Whether you're providing IT support, managing remote teams, or accessing your own devices from anywhere, HopToDesk offers a reliable and secure solution. HopToDesk does not and cannot monitor user activity as the application uses end-to-end encryption for all traffic, and does not make a distinction between personal and business use (both are allowed). Additionally, HopToDesk includes many of the main features of common remote desktop solutions such as Unattended Access, File Transfer, Live Chat, Wake-On-LAN, 2FA, Direct IP access, a Recent Session and Favorite list, and is available in over 20 languages. HopToDesk can run in portable mode or installed on desktop operating systems. Installation is optional, and will install the HopToDesk service which runs in the background and listens for incoming connections, allowing the device to be accessible at all times. Why Choose HopToDesk? Completely Free: Enjoy full access for both personal and commercial use—no hidden fees or limitations. End-to-End Encryption: All communications, including screen sharing, file transfers, and chats, are protected with robust encryption. Open Source: Contribute to and benefit from a transparent and community-driven project. No Account Required: Connect instantly without the need for sign-ups or subscriptions. Core Features Remote Control & Screen Sharing: Effortlessly access and manage remote devices. File Transfer: Securely send and receive files with drag-and-drop simplicity. Live Chat: Communicate in real-time during sessions. Multi-Monitor Support: Navigate multiple screens with ease. Clipboard Synchronization: Copy and paste seamlessly across devices. Wake-on-LAN: Power on remote systems remotely. Session Recording: Document sessions for future reference. Two-Factor Authentication: Enhance security with an additional verification layer. Custom Branding: Personalize your remote sessions with custom avatars. Unattended Access: Connect to devices without requiring user intervention. Network Customization: Adjust settings like TURN relays and signaling servers to suit your environment. Centralized Device Management Utilize the HopToDesk Dashboard to: Monitor device status in real-time. Generate invite links for easy device integration. Customize network settings and synchronize changes effortlessly. Add a personal touch with custom avatars displayed during remote sessions. Download: HopToDesk 64-bit | HopToDesk 32-bit | ~9.0 MB (Freeware) Download: HopToDesk ARM64 | 21.4 MB Link: HopToDesk Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Or use Epic games and get full games for free. lol Steam and their demos. Thankfully there’s competition
  • Recent Achievements

    • Reacting Well
      Almohandis earned a badge
      Reacting Well
    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      119
    4. 4
      Steven P.
      84
    5. 5
      neufuse
      73
  • Tell a friend

    Love Neowin? Tell a friend!