Which energy source offers the most encompassing solution, for the smallest environmental impact  

120 members have voted

  1. 1. Energy sources

    • Wind
      14
    • Solar
      28
    • Tidal
      9
    • Geothermic
      20
    • Nuclear Fusion
      37
    • Population control (free up current resources)
      12


Recommended Posts

You can only do so in a very ineffective way, either by creating vast timebombs of great volume hydrogen stores, or by creating hydro storage. Both are not actual realistic proposals.

im talking about solar panels along with lower power, higher efficiency devices, a lot of the devices being used in the house are fairly inefficient.

as for the power storing, each house would have its own couple panels and a couple deep cycle batterys, or whatever battery we use a couple years from now.

each house would be off the grid with solar panels, and it would have less of an impact on the environment then making giant hydro dams (im in BC, so all of our power is hydro)

Meh... Honestly, I think nuclear fission plants are bad enough.... I dont think we need to move toward FUSION... I mean, seriously, we'd effectively be recreating (albeit on a much smaller scale) the SUN on earth.... Sounds kinda scary to me.

Meh... Honestly, I think nuclear fission plants are bad enough.... I dont think we need to move toward FUSION... I mean, seriously, we'd effectively be recreating (albeit on a much smaller scale) the SUN on earth.... Sounds kinda scary to me.

With that attitude we would still be in the Middle Ages.

Well,they can do fussion,with deuterium but deuterium costs a lot and it's very expensive to produce energy this way. The resulting nucleoses are pretty stable so they don't emit harmful radiation.

The bulk of the radiation consists of the free subatomic particles that some reactions might produce. Hydrogen can be produced in mass quantities from ocean water. The big problem is getting hydrogen to the required temperature in order to start the nuclear fussion. First of all, the temperature is enormous and secondly it is very challenging to contain such a hot mass because anything that gets in contact with it is instantly vaporized.

The only way that I've read about so far to contain that hot mass is to generate a strong electromagnetic field which keeps the hot mass in the center of the reactor without directly touching any of it.

I would say that nuclear fussion is the biggest hope that we have.

I'd rather we focused on one thing and do it right rather than start a lot of researching projects.

they should just start a roll out in these new energies, instead of constantly telling "stop driving, eating, living cos your killing!"

most the bulbs in our house are now energy efficient, but they take a while to power up, and dont feel as bright as they should be :(

i think solar panels on houses is a real possibility, at least in the UK where energy costs are just getting toooooooo high......

it would help if the energy companies didn't post their MASSIVE profits the day before they jack the prices up!

I tend to let the experts advise me. :p They seem quite sure they'll get there sooner or later. The hardest part has been done, proof of concept. Going by past results with new inventions, once proof of concept has succeeded real life implementation follows.

Solar and wind, when integrated into our general structures, combined with increased efficiency construction, is without a doubt the best option. However, it does not fully meet our demands. Nuclear power, as in fission, remains the cleanest form of power we have. It's a shame it's been so stigmatized.

I do believe fusion will one day be realized, but it would be foolish to bet the farm on it, so to speak.

Betting the farm on impractical inefficient systems as Solar and Wind is much worse.

Both are not consistent in output, also you can't ramp them up in case of excess demand. Since on average these systems run at 30% efficiency, varying wildly over a 24 hour period from zero to 100% it can only be a workable realistic system if a radically new system electricity storage/distribution has been invented.

Since batteries are a no go area, they are pretty much maxed out already, that leaves either hydro storage or hydrogen storage. Both highly inefficient, impractical and in hydrogens case very dangerous.

Betting the farm on impractical inefficient systems as Solar and Wind is much worse.

Both are not consistent in output, also you can't ramp them up in case of excess demand. Since on average these systems run at 30% efficiency, varying wildly over a 24 hour period from zero to 100% it can only be a workable realistic system if a radically new system electricity storage/distribution has been invented.

Since batteries are a no go area, they are pretty much maxed out already, that leaves either hydro storage or hydrogen storage. Both highly inefficient, impractical and in hydrogens case very dangerous.

what...

solar panels ALWAYS use batterys.

over the last few years there have been a couple companys claiming to be close to new battery technology that would increase battery capacitys 10x.

what...

solar panels ALWAYS use batterys.

over the last few years there have been a couple companys claiming to be close to new battery technology that would increase battery capacitys 10x.

I guess you should read up on batteries first: http://www.batteryuniversity.com/

What is the ultimate miracle battery?

The ultimate miracle battery is nowhere in sight and the battery remains the 'weak link' for the foreseeable future. As long as the battery is based on an electro-chemical process, limitations of power density and short life expectancy must be taken into account. We must adapt to this constraint and design the equipment around it.

People want an inexhaustible pool of energy in a small package that is cheap, safe and clean. A radical turn will be needed to satisfy the unquenchable thirst for portable and mobile power. It is anyone's guess whether a superior electro-chemical battery, an improved fuel cell, a futuristic atomic fusion battery or some other groundbreaking energy storage device will fulfill this dream. For many, this break will not come in ones lifetime.

People want an inexhaustible pool of energy in a small package that is cheap, safe and clean. A radical turn will be needed to satisfy the unquenchable thirst for portable and mobile power. It is anyone's guess whether a superior electro-chemical battery, an improved fuel cell, a futuristic atomic fusion battery or some other groundbreaking energy storage device will fulfill this dream. For many, this break will not come in ones lifetime.

I'll go out on a rather safe limb to suggest that it will arrive before nuclear fusion becomes a practical and operational source of power.

Duly noted. I'm 54 and don't plan to live beyond the age i start to get fragile so it won't be in my lifetime that's for sure.

But it doesn't need a genius to imagine that any storage of energy is still bound by the laws of nature as we currently know them.

Currently we are at a daily consumption of about 15 terawatts and growing steeply.

Wind/Solar efficiency currently at 30% taking in all the variables means you'll need to store at the very minimum 10 terawatts to keep the world going for a day, and enough solar and wind generators to quickly charge it.

So to get 15 terawatts you need 50 terawatts of installed solar/wind generators given it's unreliability.

At present a 1 gigawatt of sea windfarm is budgeted at 5 billion euros.

So to get let's say, half of the daily needs from wind you'd need 25000 x 5 = 125 trillion euros as a base investment. Add to that the infrastructure, storage (which as yet is impossible) i guess half your 'free' energy clocks in at anywhere from 150 to 200 trillion euros to build.

Which gets us at cost of 200 trillion euros divided by 7.5 real terawatts = 26 euros/watt.

Even if you do the impossbile and you crank up current Solar/Wind efficiency by 100% you'd still end up at 13 euros/watt.

To get that down to the current prize of 5 eurocent per kilowatt, it'd better have a MTBF in the order of centuries :laugh:

Storing 10 terawatts safely will mean that you'll need a adequate batteries capable of handling that.

The only ones we have now that anyway near practical are chemical ones.

I don't want to be near any chemical that holds 1 terawatts of energy, nor is it a safe idea to have it within 100ths of miles. A chemical battery failing and releasing 1 terawatts at once will be an awesome sight. Let alone 10 terawatts.

So you'll need to redistribute 10 terawatts over a large global area, which means placing chemical bombs all over and wiring them up.

Not what you'd call a practical solution.

Duly noted. I'm 54 and don't plan to live beyond the age i start to get fragile so it won't be in my lifetime that's for sure.

But it doesn't need a genius to imagine that any storage of energy is still bound by the laws of nature as we currently know them.

...

Not what you'd call a practical solution.

Currently, a region would be hard pressed to generate more than 30% of its energy needs from renewable sources. That being said, many regions generate less than 15% so setting a minimum goal of 15% would be a good start. At least that will keep the R&D money flowing and generate jobs in the "green economy". Ontario, which is blessed with hydroelectric resources, gets 26% of its power from renewable sources.

I'm perfectly fine with using nuclear fission until renewable energy becomes more commercially viable. Ontario gets 37% of its energy needs from nuclear fission.

And that means that the remainder comes from fossil fuels which, if nothing else, offers near-perfect reliability. Ontario is closing all of its coal-fired generators because they are the worst of the worst when it comes to pollution (both in terms of carbon and smog).

My parents live in the Adalucian mountains in southern Spain, they're farm doesn't have a connected power supply and they run their entire lives from solar panels connected to a room the size of your average toilet cubical full of batteries.

The whole thing cost ?2000 to set up.

Unfortunatley the amount of sun i get over here in London, i'd be lucky to be able to make one luke warm cup of tea a fortnight!

Currently, a region would be hard pressed to generate more than 30% of its energy needs from renewable sources. That being said, many regions generate less than 15% so setting a minimum goal of 15% would be a good start. At least that will keep the R&D money flowing and generate jobs in the "green economy". Ontario, which is blessed with hydroelectric resources, gets 26% of its power from renewable sources.

I'm perfectly fine with using nuclear fission until renewable energy becomes more commercially viable. Ontario gets 37% of its energy needs from nuclear fission.

And that means that the remainder comes from fossil fuels which, if nothing else, offers near-perfect reliability. Ontario is closing all of its coal-fired generators because they are the worst of the worst when it comes to pollution (both in terms of carbon and smog).

All modern coal fired plants are smog free, there's an extensive exhaust cleaning process. It's the older ones which do the harm. Carbon is good for the plants the more the better.

One guestimates that there's enough coal to keep us going for centuries

energy.jpg

France does 80% fission. My wallet is very happy?:pp Electricity is dirtcheap compared to the rest of europe.

That's my idea. Do fission till fusion becomes workable.

'renewable' energy doesn't exist. The materials and machines necessary are costly and wear out, so you'll need constant maintenance at a high rate. Especially wind generators are very fragile devices.?

Solar for real time use is impossible. The cost per watt is just to high. On a per household basis it can serve as an addition to centrally distributed power for the greenies to make them feel good, but never replace it.

All modern coal fired plants are smog free, there's an extensive exhaust cleaning process. It's the older ones which do the harm. Carbon is good for the plants the more the better

Just because some PR-wiz managed to get the "Clean Coal" slogan to stick doesn't mean that coal is remotely clean. The best coal-fired plant is still worse than a natural-gas fired plant since Coal generates both smog and acid rain on top of the carbon emissions that you likely don't care about. Coal scrubbers do not prevent air pollution, but they do reduce it by filtering out some of the most harmful pollutants. Even with scrubbers and the tallest smokestacks the best you can hope for is to put the smog higher up in the atmosphere so that it doesn't disperse in your own back yard. That still is hardly responsible.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!